Re: NetBSD in an HVM instance can't see outside world

[Manuel Bouyer <bouyer%antioche.eu.org@localhost>]

On Wed, Sep 03, 2008 at 11:28:24AM -0700, Michael Litchard wrote:
> rtk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         address: 00:00:e8:93:9f:cd
>         media: Ethernet autoselect (100baseTX full-duplex)
>         status: active
>         inet 192.168.1.106 netmask 0xffffff00 broadcast 192.168.1.255
>         inet6 fe80::200:e8ff:fe93:9fcd%rtk0 prefixlen 64 scopeid 0x1
> nfe0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>         
> capabilities=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM
> _Rx,UDP4CSUM_Tx>
>         enabled=0
>         address: 00:1e:8c:a4:1b:fd
>         media: Ethernet autoselect
>         status: no carrier
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33648
>         inet 127.0.0.1 netmask 0xff000000
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
> bridge0: flags=41<UP,RUNNING> mtu 1500
> xvif13.0: flags=8923<UP,BROADCAST,NOTRAILERS,PROMISC,SIMPLEX,MULTICAST> mtu 
> 1500
>         capabilities=2800<TCP4CSUM_Tx,UDP4CSUM_Tx>
>         enabled=0
>         address: 00:16:3d:01:00:13
>         inet6 fe80::216:3dff:fe01:13%xvif13.0 prefixlen 64 scopeid 0x11
> tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>         address: f2:0b:a4:ea:df:03
>         media: Ethernet autoselect
>         inet6 fe80::f00b:a4ff:feea:df03%tap0 prefixlen 64 scopeid 0x12
> 
> tap is up and running, how can I verify it's added to bridge0 (what am
> I looking for)?

brconfig bridge0
will tell you which interfaces are connected to the bridge

-- 
Manuel Bouyer <bouyer%antioche.eu.org@localhost>
     NetBSD: 26 ans d'experience feront toujours la difference
--