Port-xen archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Booting XEN3_DOM0 results into "panic: pci_get_capability"
On Thursday 18 September 2008 11:05:27 Christoph Schug wrote:
> Hi list!
>
> First of all since I'm new to NetBSD & Xen I might do something terribly
> wrong but I would be glad to receive some hints. Nevertheless I wanted
> to check out Xen on NetBSD and therefore installed NetBSD 4.99.72/amd64
> as of yesterday on a Dell Optiplex 740 box, installed xentools3-3.1.4
> and xenkernel3-3.1.4 from pkgsrc and fetched boot(8) from [1] in order
> to avoid GRUB. Using following line in boot.cfg
>
> ---8<---snipp---8<---
>
> menu=Boot Xen:modules enabled;load /netbsd-XEN3_DOM0;multiboot xen.gz
> dom0_mem=65536 com1=115200,8n1 -- bootdev=wd0a ro console=ttyS0
>
> --->8---snapp--->8---
>
> I can see Xen 3.1.4 booting up, launching the XEN3_DOM0 kernel which
> panics at once. As I'm new to the whole stuff I cannot really judge
> whether I'm doing something wrong here or if this really is some bug.
Another proof that Roberts boot(8) works out-of-the box.
Does a native NetBSD/amd64 boot ? If not, does Linux boot ?
Can you give us a full register dump of all pci devices, please?
It seems, there's a piece of hw violating the pci specs.
Christoph
>
> ---8<---snipp---8<---
> __ __ _____ _ _ _
> \ \/ /___ _ __ |___ / / || || |
> \ // _ \ '_ \ |_ \ | || || |_
> / \ __/ | | | ___) || ||__ _|
> /_/\_\___|_| |_| |____(_)_(_) |_|
>
> http://www.cl.cam.ac.uk/netos/xen
> University of Cambridge Computer Laboratory
>
> Xen version 3.1.4 (root@) (gcc version 4.1.3 20080704 prerelease (NetBSD
> nb1 20080202)) Wed Sep 17 14:49:47 CEST 2008 Latest ChangeSet: unavailable
>
> (XEN) Command line: com1=115200,8n1
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
> (XEN) Disc information:
> (XEN) Found 2 MBR signatures
> (XEN) Found 2 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009f000 (usable)
> (XEN) 000000000009f000 - 00000000000a0000 (reserved)
> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 000000007eed0000 (usable)
> (XEN) 000000007eed0000 - 000000007eed3000 (ACPI NVS)
> (XEN) 000000007eed3000 - 000000007eee0000 (ACPI data)
> (XEN) 000000007eee0000 - 000000007ef00000 (reserved)
> (XEN) 000000007f000000 - 0000000080000000 (reserved)
> (XEN) 00000000f0000000 - 00000000f4000000 (reserved)
> (XEN) 00000000fec00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 2030MB (2079164kB)
> (XEN) Xen heap: 14MB (15156kB)
> (XEN) Domain heap initialised: DMA width 32 bits
> (XEN) Processor #0 15:11 APIC version 16
> (XEN) Processor #1 15:11 APIC version 16
> (XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2304.865 MHz processor.
> (XEN) AMD SVM: ASIDs enabled.
> (XEN) HVM: SVM enabled
> (XEN) CPU0: AMD Athlon(tm) Dual Core Processor 4450B stepping 02
> (XEN) Booting processor 1/1 eip 90000
> (XEN) AMD: Disabling C1 Clock Ramping Node #0
> (XEN) AMD SVM: ASIDs enabled.
> (XEN) CPU1: AMD Athlon(tm) Dual Core Processor 4450B stepping 02
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) Platform timer overflows in 8589 jiffies.
> (XEN) Platform timer is 25.000MHz HPET
> (XEN) Brought up 2 CPUs
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80100000 ->
> 0xffffffff80c37d00 (XEN) Dom0 symbol map 0xffffffff80c37d00 ->
> 0xffffffff80d2c6a8
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000078000000->000000007a000000 (468907 pages to
> be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff80100000->ffffffff80d2c6a8
> (XEN) Init. ramdisk: ffffffff80d2d000->ffffffff80d2d000
> (XEN) Phys-Mach map: ffffffff80d2d000->ffffffff810d0d58
> (XEN) Start info: ffffffff810d1000->ffffffff810d149c
> (XEN) Page tables: ffffffff810d2000->ffffffff810df000
> (XEN) Boot stack: ffffffff810df000->ffffffff810e0000
> (XEN) TOTAL: ffffffff80000000->ffffffff81400000
> (XEN) ENTRY ADDRESS: ffffffff80100000
> (XEN) Dom0 has maximum 2 VCPUs
> (XEN) Scrubbing Free RAM: .done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
> to Xen). (XEN) Freed 100kB init memory.
> Loaded initial symtab at 0xffffffff80c37d04, strtab at 0xffffffff80ccbd40,
> # entries 25161 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
> 2003, 2004, 2005, 2006, 2007, 2008
> The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 4.99.72 (XEN3_DOM0) #0: Wed Sep 17 19:34:12 CEST 2008
> \0x09adm%pkg.example.com@localhost:/usr/obj/sys/arch/amd64/compile/XEN3_DOM0
> total memory = 1863 MB
> avail memory = 1787 MB
> SMBIOS rev. 2.4 @ 0xf0000 (71 entries)
> mainbus0 (root)
> pmap_kenter_pa: pa 0x0 for va 0xffffa00047da0000 outside range
> pmap_kenter_pa: pa 0x9f000 for va 0xffffa00047da0000 outside range
> pmap_kenter_pa: pa 0x9e000 for va 0xffffa00047da0000 outside range
> pmap_kenter_pa: pa 0xf0000 for va 0xffffa00047da0000 outside range
> pmap_kenter_pa: pa 0xf1000 for va 0xffffa00047da1000 outside range
> pmap_kenter_pa: pa 0xf2000 for va 0xffffa00047da2000 outside range
> pmap_kenter_pa: pa 0xf3000 for va 0xffffa00047da3000 outside range
> pmap_kenter_pa: pa 0xf4000 for va 0xffffa00047da4000 outside range
> pmap_kenter_pa: pa 0xf5000 for va 0xffffa00047da5000 outside range
> pmap_kenter_pa: pa 0xf6000 for va 0xffffa00047da6000 outside range
> pmap_kenter_pa: pa 0xf7000 for va 0xffffa00047da7000 outside range
> pmap_kenter_pa: pa 0xf8000 for va 0xffffa00047da8000 outside range
> pmap_kenter_pa: pa 0xf9000 for va 0xffffa00047da9000 outside range
> pmap_kenter_pa: pa 0xfa000 for va 0xffffa00047daa000 outside range
> pmap_kenter_pa: pa 0xfb000 for va 0xffffa00047dab000 outside range
> pmap_kenter_pa: pa 0xfc000 for va 0xffffa00047dac000 outside range
> pmap_kenter_pa: pa 0xfd000 for va 0xffffa00047dad000 outside range
> pmap_kenter_pa: pa 0xfe000 for va 0xffffa00047dae000 outside range
> pmap_kenter_pa: pa 0xff000 for va 0xffffa00047daf000 outside range
> pmap_kenter_pa: pa 0xf3000 for va 0xffffa00047da0000 outside range
> pmap_kenter_pa: pa 0xf2000 for va 0xffffa00047da1000 outside range
> pmap_kenter_pa: pa 0xf2000 for va 0xffffa00047da1000 outside range
> cpu0 at mainbus0 apid 0: (boot processor)
> cpu1 at mainbus0 apid 1: (application processor)
> ioapic0 at mainbus0 apid 4, virtual wire mode
> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
> ioapic0: can't remap to apid 4
> hypervisor0 at mainbus0: Xen version 3.1
> vcpu0 at hypervisor0: AMD 686-class, 2304MHz, id 0x60fb2
> xenbus0 at hypervisor0: Xen Virtual Bus Interface
> xencons0 at hypervisor0: Xen Virtual Console Driver
> acpi0 at hypervisor0: Intel ACPICA 20080321
> mpacpi: found root PCI bus 0 at level 1
> mpacpi: found subordinate bus 4 at level 2
> mpacpi: 2 PCI busses
> mpacpi: ISA interrupt override 0 -> 2 (0/0)
> mpacpi: ISA interrupt override 9 -> 9 (1/3)
> mpacpi: ISA interrupt override 14 -> 14 (1/1)
> mpacpi: ISA interrupt override 15 -> 15 (1/1)
> mpacpi: configuring PCI bus 0 int routing
> mpacpi: configuring PCI bus 4 int routing
> ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags
> 0<pol=0,trig=0>) ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0>
> flags 0<pol=0,trig=0>) ioapic0: pin 3 attached to isa0 irq 3 (type
> 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 4 attached to isa0 irq 4
> (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 5 attached to isa0 irq
> 5 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 6 attached to isa0
> irq 6 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 7 attached to
> isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 8 attached
> to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 9
> attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act Hi,trig=3=Level>)
> ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags
> 0<pol=0,trig=0>) ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0>
> flags 0<pol=0,trig=0>) ioapic0: pin 12 attached to isa0 irq 12 (type
> 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 13 attached to isa0 irq 13
> (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: pin 14 attached to isa0 irq
> 14 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>) ioapic0: pin 15
> attached to isa0 irq 15 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
> local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags
> 0<pol=0,trig=0>) local apic: pin 1 attached to NMI (type 1<type=1=NMI>
> flags 0<pol=0,trig=0>) local apic: pin 1 attached to NMI (type
> 1<type=1=NMI> flags 0<pol=0,trig=0>) local apic: pin 1 attached to NMI
> (type 1<type=1=NMI> flags 0<pol=0,trig=0>) linkdev APCS attached to pci0
> device 10 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APMU attached to pci0 device 10 INT_B (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APCF attached to pci0 device 11 INT_A (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APCL attached to pci0
> device 11 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APCH attached to pci0 device 20 INT_A (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APCJ attached to pci0 device 16 INT_A (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev AAZA attached to pci0
> device 16 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APCJ attached to pci0 device 16 INT_C (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APCK attached to pci0 device 16 INT_D (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APCZ attached to pci0
> device 13 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APSI attached to pci0 device 14 INT_A (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APSJ attached to pci0 device 15 INT_A (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC5 attached to pci0
> device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC6 attached to pci0 device 4 INT_B (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC7 attached to pci0 device 4 INT_C (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC8 attached to pci0
> device 4 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC5 attached to pci0 device 3 INT_A (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC6 attached to pci0 device 3 INT_B (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC7 attached to pci0
> device 3 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC8 attached to pci0 device 3 INT_D (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC6 attached to pci0 device 2 INT_A (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC7 attached to pci0
> device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC8 attached to pci0 device 2 INT_C (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC5 attached to pci0 device 2 INT_D (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC7 attached to pci0
> device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC8 attached to pci0 device 5 INT_B (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC5 attached to pci0 device 5 INT_C (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC6 attached to pci0
> device 5 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC2 attached to pci4 device 9 INT_A (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC3 attached to pci4 device 9 INT_B (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC4 attached to pci4
> device 9 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC1 attached to pci4 device 9 INT_D (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC1 attached to pci4 device 8 INT_A (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC2 attached to pci4
> device 8 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC3 attached to pci4 device 8 INT_C (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC4 attached to pci4 device 8 INT_D (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC4 attached to pci4
> device 7 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC4 attached to pci4 device 7 INT_B (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC4 attached to pci4 device 7 INT_C (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC4 attached to pci4
> device 7 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC2 attached to pci4 device 0 INT_A (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC3 attached to pci4 device 0 INT_B (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC4 attached to pci4
> device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC1 attached to pci4 device 0 INT_D (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC3 attached to pci4 device 1 INT_A (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev APC4 attached to pci4
> device 1 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) linkdev
> APC1 attached to pci4 device 1 INT_C (type 0<type=0> flags f<pol=3=Act
> Lo,trig=3=Level>) linkdev APC2 attached to pci4 device 1 INT_D (type
> 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) ioapic0: int9
> 18998<vector=98,delmode=1,logical,level,masked,dest=0> 3000000<target=3>
> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
> TMR (PNP0100) [AT Timer] at acpi0 not configured
> pcppi0 at acpi0 (SPKR, PNP0800)
> pcppi0: io 0x61
> UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
> pci0 at hypervisor0 bus 0: configuration mode 1
> hypervisor0: added to list as bus 0
> vendor 0x10de product 0x02f0 (RAM memory, revision 0xa2) at pci0 dev 0
> function 0 not configured vendor 0x10de product 0x02fa (RAM memory,
> revision 0xa2) at pci0 dev 0 function 1 not configured vendor 0x10de
> product 0x02fe (RAM memory, revision 0xa2) at pci0 dev 0 function 2 not
> configured vendor 0x10de product 0x02f8 (RAM memory, revision 0xa2) at pci0
> dev 0 function 3 not configured vendor 0x10de product 0x02f9 (RAM memory,
> revision 0xa2) at pci0 dev 0 function 4 not configured vendor 0x10de
> product 0x02ff (RAM memory, revision 0xa2) at pci0 dev 0 function 5 not
> configured panic: pci_get_capability
> fatal breakpoint trap in supervisor mode
> trap type 1 code 0 rip ffffffff804b6a2d cs e030 rflags 246 cr2 0 cpl 8 rsp
> ffffffff810e2970 Stopped in pid 0.1 (system) at netbsd:breakpoint+0x5:
> leave
> breakpoint() at netbsd:breakpoint+0x5
> panic() at netbsd:panic+0x255
> pci_get_capability() at netbsd:pci_get_capability+0xf8
> pci_get_powerstate() at netbsd:pci_get_powerstate+0x2e
> pci_probe_device() at netbsd:pci_probe_device+0x29c
> pci_enumerate_bus() at netbsd:pci_enumerate_bus+0x13b
> pcirescan() at netbsd:pcirescan+0x4f
> pciattach() at netbsd:pciattach+0x1b7
> config_attach_loc() at netbsd:config_attach_loc+0x15a
> mpacpi_scan_pci() at netbsd:mpacpi_scan_pci+0x9b
> hypervisor_attach() at netbsd:hypervisor_attach+0x1f2
> config_attach_loc() at netbsd:config_attach_loc+0x15a
> mainbus_attach() at netbsd:mainbus_attach+0xc8
> config_attach_loc() at netbsd:config_attach_loc+0x15a
> cpu_configure() at netbsd:cpu_configure+0x25
> configure() at netbsd:configure+0x40
> main() at netbsd:main+0x195
> ds 0x2980
> es 0xe2b3
> fs 0x2980
> gs 0xe2b3
> rdi 0x8
> rsi 0x1
> rbp 0xffffffff810e2970
> rbx 0xffffffff810e2980
> rdx 0
> rcx 0
> rax 0x1
> r8 0xffffffff810e2890
> r9 0x1
> r10 0xffffffff810e2890
> r11 0xffffffff804f36a0 xenconscn_putc
> r12 0x100
> r13 0xffffffff808ce2b3 copyright+0x22d13
> r14 0x1
> r15 0xffffffff810e2ad4
> rip 0xffffffff804b6a2d breakpoint+0x5
> cs 0xe030
> rflags 0x246
> rsp 0xffffffff810e2970
> ss 0xe02b
> netbsd:breakpoint+0x5: leave
> db>
> --->8---snapp--->8---
>
> [1] ftp://ftp.netbsd.org/pub/NetBSD/misc/rjs/boot
>
> Thanks in advance,
> Christoph
Home |
Main Index |
Thread Index |
Old Index