Port-xen archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: XEN and cardbus
On 01/22/2010 03:50 PM, Greg Troxel wrote:
...
Given that it works with GENERIC and not wtih XEN3_DOM0, I would look
into what happens with pci memory space mapping. Read the manpage for
cardbus(4). Basically mappings are set up to put the cardbus (pci)
memory space into the host computer's memory space someplace, and the
code before what you patched is trying to avoid where physical memory is
mapped. But on xen, the whole memory layout may be different.
My next try was to try this:
options PCI_BUS_FIXUP
#options PCI_ADDR_FIXUP
#options PCI_INTR_FIXUP
#options PCI_INTR_FIXUP_DISABLED
options RBUS_MIN_START="0x80000000"
cbb* at pci? dev? function ?
cardslot* at cbb?
cardbus* at cardslot?
pcmcia* at cardslot?
siisata* at cardbus? function ?
rtk* at cardbus? function ?
re* at cardbus? function ?
The RBUS_MIN_START helped in that way that I don't get memory mapping
problem now, but an interrupt related problem. Playing with
PCI_INTR_FIXUP{,_DISABLED} options didn't help and I'm getting this:
linkdev LNKD returned ACPI global irq 11, line 11
panic: Failed to bind physical IRQ 255
Full dmesg is attached. Any idea what can I do now?
Thanks in advance,
Juraj
Press any key to continue.
root (hd0,1,a)
Filesystem type is ffs, partition type 0xa9
kernel (hd0,0)/kernels/xen/3.3.2/xen-debug.gz dom0_mem=524288 cpuidle cpufreq=d
om0-kernel loglvl=all console=com1 com1=115200,8n1
[Multiboot-elf, <0x100000:0xf750c:0x65af4>, shtab=0x25d078, entry=0x100000]
module (hd0,0)/kernels/netbsd/netbsd-XEN3PAE_DOM0_MASTER-cb.gz ro console=com1,
speed=115200
[Multiboot-module @ 0x25e000, 0xb0e3c3 bytes]
__ __ _____ _____ ____
\ \/ /___ _ __ |___ / |___ / |___ \
\ // _ \ '_ \ |_ \ |_ \ __) |
/ \ __/ | | | ___) | ___) | / __/
/_/\_\___|_| |_| |____(_)____(_)_____|
(XEN) Xen version 3.3.2 (juraj@localdomain) (gcc version 4.4.2 (GCC) ) Mon Nov
30 21:36:01 CET 2009
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: dom0_mem=524288 cpuidle cpufreq=dom0-kernel loglvl=all
console=com1 com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 0000000000100000 - 000000005ffae000 (usable)
(XEN) 000000005ffae000 - 0000000060000000 (reserved)
(XEN) 00000000feda0000 - 00000000fee00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1535MB (1572148kB)
(XEN) ACPI: RSDP 000FDF00, 0014 (r0 DELL )
(XEN) ACPI: RSDT 5FFF0000, 002C (r1 DELL CPi R 27D5061E ASL 61)
(XEN) ACPI: FACP 5FFF0400, 0074 (r1 DELL CPi R 27D5061E ASL 61)
(XEN) ACPI: DSDT 5FFF0C00, 2E30 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
(XEN) ACPI: FACS 5FFFF800, 0040
(XEN) ACPI: ASF! 5FFF0800, 005B (r16 DELL CPi R 27D5061E ASL 61)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000005ffae000
(XEN) Xen heap: 9MB (9796kB)
(XEN) Domain heap initialised
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[5ffff80c], vec_size[20]
(XEN) Local APIC disabled by BIOS -- you can enable it with "lapic"
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 1993.581 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Setting frequency MHz: 600, voltage mV: 700
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06
(XEN) SMP motherboard not detected.
(XEN) Local APIC not detected. Using dummy APIC emulation.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Brought up 1 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) xenoprof: Initialization failed. No APIC
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xc0100000 memsz=0x97c85c
(XEN) elf_parse_binary: phdr: paddr=0xc0a7d880 memsz=0x108c9c
(XEN) elf_parse_binary: memory: 0xc0100000 -> 0xc0b8651c
(XEN) elf_xen_parse: __xen_guest:
"GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0,VIRT_BASE=0xc0000000,ELF_PADDR_OFFSET=0xc0000000,VIRT_ENT"
(XEN) elf_xen_parse_guest_info: GUEST_OS="netbsd"
(XEN) elf_xen_parse_guest_info: GUEST_VER="3.0"
(XEN) elf_xen_parse_guest_info: XEN_VER="xen-3.0"
(XEN) elf_xen_parse_guest_info: VIRT_BASE="0xc0000000"
(XEN) elf_xen_parse_guest_info: ELF_PADDR_OFFSET="0xc0000000"
(XEN) elf_xen_parse_guest_info: VIRT_ENTRY="0xc0100000"
(XEN) elf_xen_parse_guest_info: HYPERCALL_PAGE="0x00000101"
(XEN) elf_xen_parse_guest_info: PAE="yes[extended-cr3]"
(XEN) elf_xen_parse_guest_info: LOADER="generic"
(XEN) elf_xen_parse_guest_info: BSD_SYMTAB="yes"
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xc0000000
(XEN) elf_paddr_offset = 0xc0000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xc0100000
(XEN) virt_kend = 0xc0c6b0a4
(XEN) virt_entry = 0xc0100000
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc0b8651c
(XEN) Dom0 symbol map 0xc0b8651c -> 0xc0c6b0a4
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000003e000000->000000003f000000 (126976 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c0c6b0a4
(XEN) Init. ramdisk: c0c6c000->c0c6c000
(XEN) Phys-Mach map: c0c6c000->c0cec000
(XEN) Start info: c0cec000->c0cec474
(XEN) Page tables: c0ced000->c0cfa000
(XEN) Boot stack: c0cfa000->c0cfb000
(XEN) TOTAL: c0000000->c1000000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xc0100000 -> 0xc0a7c85c
(XEN) elf_load_binary: phdr 1 at 0xc0a7d880 -> 0xc0af3c74
(XEN) elf_load_bsdsyms: shdr 28 at 0x3ff1a872 -> 0xc0b86a2c
(XEN) elf_load_bsdsyms: shdr 29 at 0x3ff1aef0 -> 0xc0b86bd0
(XEN) elf_load_bsdsyms: shdr 30 at 0x3ff8eab0 -> 0xc0bfa790
(XEN) Scrubbing Free RAM: .........done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 96kB init memory.
Loaded initial symtab at 0xc0b86520, strtab at 0xc0bfa790, # entries 27988
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.22 (XEN3PAE_DOM0_MASTER) #21: Sat Jan 23 17:10:41 CET 2010
builder@dump:/os/netbsd/build/netbsd-new-i386/obj/sys/arch/i386/compile/XEN3PAE_DOM0_MASTER
total memory = 512 MB
avail memory = 489 MB
mainbus0 (root)
pmap_kenter_pa: pa 0x0 for va 0xcaeb0000 outside range
pmap_kenter_pa: pa 0x9f000 for va 0xcaeb0000 outside range
pmap_kenter_pa: pa 0x9e000 for va 0xcaeb0000 outside range
pmap_kenter_pa: pa 0xf0000 for va 0xcaeb0000 outside range
pmap_kenter_pa: pa 0xf1000 for va 0xcaeb1000 outside range
pmap_kenter_pa: pa 0xf2000 for va 0xcaeb2000 outside range
pmap_kenter_pa: pa 0xf3000 for va 0xcaeb3000 outside range
pmap_kenter_pa: pa 0xf4000 for va 0xcaeb4000 outside range
pmap_kenter_pa: pa 0xf5000 for va 0xcaeb5000 outside range
pmap_kenter_pa: pa 0xf6000 for va 0xcaeb6000 outside range
pmap_kenter_pa: pa 0xf7000 for va 0xcaeb7000 outside range
pmap_kenter_pa: pa 0xf8000 for va 0xcaeb8000 outside range
pmap_kenter_pa: pa 0xf9000 for va 0xcaeb9000 outside range
pmap_kenter_pa: pa 0xfa000 for va 0xcaeba000 outside range
pmap_kenter_pa: pa 0xfb000 for va 0xcaebb000 outside range
pmap_kenter_pa: pa 0xfc000 for va 0xcaebc000 outside range
pmap_kenter_pa: pa 0xfd000 for va 0xcaebd000 outside range
pmap_kenter_pa: pa 0xfe000 for va 0xcaebe000 outside range
pmap_kenter_pa: pa 0xff000 for va 0xcaebf000 outside range
cpu0 at mainbus0: (uniprocessor)
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: Intel 686-class, 598MHz, id 0x6d6
vcpu0: Enhanced SpeedStep UnderVolting default voltages (mV): 1340 1292 1244
1196 1148 1100 1052 988
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
npx0 at hypervisor0: using exception 16
acpi0 at hypervisor0: Intel ACPICA 20090730
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: 3 PCI busses
mpacpi: configuring PCI bus 0 int routing
LNKB: BIOS IRQ 11 for 0.31.INTB is invalid
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
LNKB: BIOS IRQ 11 for 2.3.INTA is invalid
pic0: pin 0 attached to isa0 irq 0 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 1 attached to isa0 irq 1 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 3 attached to isa0 irq 3 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 4 attached to isa0 irq 4 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 5 attached to isa0 irq 5 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 6 attached to isa0 irq 6 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 7 attached to isa0 irq 7 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 8 attached to isa0 irq 8 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 9 attached to isa0 irq 9 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 10 attached to isa0 irq 10 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 11 attached to isa0 irq 11 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 12 attached to isa0 irq 12 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 13 attached to isa0 irq 13 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 14 attached to isa0 irq 14 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 15 attached to isa0 irq 15 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
linkdev LNKA attached to pci0 device 31 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci0 device 31 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKC attached to pci0 device 31 INT_C (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci0 device 31 INT_D (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKA attached to pci0 device 29 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci0 device 29 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKC attached to pci0 device 29 INT_C (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKH attached to pci0 device 29 INT_D (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKA attached to pci0 device 1 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci0 device 1 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKA attached to pci1 device 0 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci2 device 1 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci2 device 1 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci2 device 3 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci2 device 3 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKC attached to pci2 device 0 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci2 device 8 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci2 device 8 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
9 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
10 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
11 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
12 (20090730/nsrepair-215)
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
PS2M (PNP0F13) [PS/2 Port for PS/2-style Mice] at acpi0 not configured
KBC (PNP0303) [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not
configured
TMR (PNP0100) [AT Timer] at acpi0 not configured
SPKR (PNP0800) [AT-style speaker sound] at acpi0 not configured
COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
ECP (PNP0401) [ECP printer port] at acpi0 not configured
THM (ACPI Object Type 'Thermal' [0x0d]) at acpi0 not configured
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pchb0 at pci0 dev 0 function 0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
ppb0: added to list as bus 1
vga0 at pci1 dev 0 function 0: NVIDIA product 0x034c (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
linkdev LNKA returned ACPI global irq 11, line 11
uhci0: interrupting at irq 11, event channel 4
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
linkdev LNKD returned ACPI global irq 11, line 11
uhci1: interrupting at irq 11, event channel 4
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
linkdev LNKC returned ACPI global irq 11, line 11
uhci2: interrupting at irq 11, event channel 4
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
linkdev LNKH returned ACPI global irq 11, line 11
ehci0: interrupting at irq 11, event channel 4
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
ppb1: added to list as bus 2
bge0 at pci2 dev 0 function 0: Broadcom BCM5705M Gigabit Ethernet
linkdev LNKC returned ACPI global irq 11, line 11
bge0: interrupting at irq 11, event channel 4
bge0: ASIC BCM5705 A1 (0x3001), Ethernet address 00:01:02:03:04:05
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
cbb0 at pci2 dev 1 function 0: Texas Instruments PCI7510 PCI-CardBus Bridge w/
IEEE 1394 Host Controller (rev. 0x01)
cbb1 at pci2 dev 1 function 1: Texas Instruments PCI7610 PCI-CardBus Bridge
(Smart Card Mode) (rev. 0x01)
fwohci0 at pci2 dev 1 function 2: Texas Instruments PCI7[4-6]10 IEEE 1394 Host
Controller w/ PCI-CardBus Bridge (rev. 0x00)
linkdev LNKD returned ACPI global irq 11, line 11
fwohci0: interrupting at irq 11, event channel 4
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 01:02:03:04:05:06:07:08
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Texas Instruments product 0x8204 (miscellaneous system) at pci2 dev 1 function
3 not configured
iwi0 at pci2 dev 3 function 0: Intel PRO/Wireless LAN 2915ABG Mini-PCI Adapter
(rev. 0x05)
linkdev LNKB returned ACPI global irq 9, line 9
iwi0: interrupting at irq 11, event channel 4
iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
linkdev LNKD returned ACPI global irq 11, line 11
panic: Failed to bind physical IRQ 255
fatal breakpoint trap in supervisor mode
trap type 1 code 0 eip c02300d4 cs 9 eflags 246 cr2 0 ilevel 8
Stopped in pid 0.1 (system) at netbsd:breakpoint+0x4: popl %ebp
db> bt
breakpoint(c0a7119a,c0cfd604,c0a8f780,c06a02ab,c0a31ce0,5,0,0,c0cfd604,c0cfd618)
at netbsd:breakpoint+0x4
panic(c09f8154,ff,b,b,c0cfd620,2,ff,1,3,3) at netbsd:panic+0x1d8
bind_pirq_to_evtch(ff,8002083c,c0cfd678,c05a12c0,8,0,0,0,0,0) at netbsd:bind_pir
q_to_evtch+0x92
xen_intr_map(c0cfd704,3,c0cfd704,c0cfd6b4,c0cfd6b0,ffffffff,c0cfd6c8,4,0,1000000
) at netbsd:xen_intr_map+0xeb
pci_intr_map(caf63e54,c0cfd704,0,0,c0cfd728,8002080c,c0cfd718,c059a34e,1,cb5ae00
0) at netbsd:pci_intr_map+0x114
pccbb_intrinit(cafb1004,c0a3a1d2,822008,20,fff,0,1000,0,0,c0cfd7b0) at netbsd:pc
cbb_intrinit+0x32
pccbb_pci_callback(cafb1004,0,c0aed69c,c0a826f8,c09d6be7,0,c0cfd818,c06906e6,caf
7ac3c,caf7ac3c) at netbsd:pccbb_pci_callback+0x273
config_process_deferred(caf7ac3c,caf7ac3c,c0cfd85c,0,c0cfd85c,caf63804,caf7ac3c,
c09d6cdf,c05a66f0,caf63804) at netbsd:config_process_deferred+0x44
config_attach_loc(caf63804,c0a816c0,0,c0cfd85c,c05a66f0,0,c0cfd998,c05e8089,caf6
3804,c09d6cdf) at netbsd:config_attach_loc+0x1a6
config_found_ia(caf63804,c09d6cdf,c0cfd85c,c05a66f0,100,caf29f04,c0cfdba8,c05a00
0c,0,1) at netbsd:config_found_ia+0x32
ppbattach(caee2c3c,caf63804,c0cfd9fc,c0cfda38,c0cfd9fc,8000f000,caf63804,caede00
4,c09d6be7,c059ff90) at netbsd:ppbattach+0x1a9
config_attach_loc(caee2c3c,c0a819c0,c0cfda38,c0cfd9fc,c059ff90,c068e9e0,c0cfda78
,24488086,80800107,10000) at netbsd:config_attach_loc+0x176
pci_probe_device(caede004,8000f000,0,0,0,c0996cd4,c0cfdba8,1,0,8000f000) at netb
sd:pci_probe_device+0x272
pci_enumerate_bus(caede004,c0996cd0,0,0,caee2c3c,caee2c3c,caede004,c09d6be7,c099
6cd0,c05a01e0) at netbsd:pci_enumerate_bus+0x187
pcirescan(caee2c3c,c09d6be7,c0996cd0,c06a08f6,cae9e028,c05a66f0,caee2c3c,caede00
4,2,0) at netbsd:pcirescan+0x5a
pciattach(cae9e00c,caee2c3c,c0cfdb74,0,c0cfdb74,0,caee2c3c,c0cfdb74,cae9e00c,0)
a
t netbsd:pciattach+0x18e
config_attach_loc(cae9e00c,c0a81690,0,c0cfdb74,c05a66f0,0,c0cfdba8,c02f7bbe,cae9
e00c,c09d6cdf) at netbsd:config_attach_loc+0x176
config_found_ia(cae9e00c,c09d6cdf,c0cfdb74,c05a66f0,c0cfdbb4,0,0,1,c0aebca0,0) a
t netbsd:config_found_ia+0x32
hypervisor_attach(caea79dc,cae9e00c,c0cfdc24,0,c0cfdc24,c0cfdc48,cae9e00c,caea79
dc,c0cfdc24,c0cfdc48) at netbsd:hypervisor_attach+0x14e
config_attach_loc(caea79dc,c0a815b8,0,c0cfdc24,c0504010,0,c0cfdc58,c05040e3,caea
79dc,c09d6cbe) at netbsd:config_attach_loc+0x176
config_found_ia(caea79dc,c09d6cbe,c0cfdc24,c0504010,c0a53293,5,0,0,c0cfdc64,c09d
66ee) at netbsd:config_found_ia+0x32
mainbus_attach(0,caea79dc,0,c068ebde,c09d66e6,c09d66e6,caea79dc,0,c09d66e6,0) at
netbsd:mainbus_attach+0xa3
config_attach_loc(0,c0a815a0,0,0,0,0,c0cfdcc8,c0690934,0,c0a815a0) at netbsd:con
fig_attach_loc+0x176
config_attach(0,c0a815a0,0,0,c0a8f780,cfe000,c0cfdce8,c01e28a7,c09d66e6,0) at ne
tbsd:config_attach+0x2c
config_rootfound(c09d66e6,0,0,8,c16ae800,c0a8f780,c0cfdd38,c040b41e,c0b37f80,a)
a
t netbsd:config_rootfound+0x44
cpu_configure(c0b37f80,a,14,1f2fe,0,0,0,6000,0,d02) at netbsd:cpu_configure+0x27
main(c0100063,c010006b,0,0,0,0,0,0,0,0) at netbsd:main+0x22e
db>
Home |
Main Index |
Thread Index |
Old Index