Re: XEN on NetBSD-6.1 amd64.

[Adiel de Lima Ribeiro <adiel.netadmin%gmail.com@localhost>]

On Thu, 2013-08-01 at 20:12 +0200, Manuel Bouyer wrote:
> On Thu, Aug 01, 2013 at 02:22:35PM -0300, Adiel de Lima Ribeiro wrote:
> > Here is my ifconfig -a output:
> > 
> > bce0:
> > flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu
> > 1500
> >         address: 00:18:8b:e1:67:47
> >         media: Ethernet autoselect (100baseTX
> > full-duplex,flowcontrol,rxpause,txpause)
> >         status: active
> >         inet 192.168.254.126 netmask 0xffffff00 broadcast
> > 192.168.254.255
> > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33648
> >         inet 127.0.0.1 netmask 0xff000000
> > bridge0: flags=41<UP,RUNNING> mtu 1500
> > tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> >         address: f2:0b:a4:fe:b1:01
> >         media: Ethernet autoselect
> 
> tap0 should be up here
> 
> > xvif3i0: flags=8923<UP,BROADCAST,NOTRAILERS,PROMISC,SIMPLEX,MULTICAST>
> > mtu 1500
> >         capabilities=2800<TCP4CSUM_Tx,UDP4CSUM_Tx>
> >         enabled=0
> >         address: 00:16:3e:3b:8a:4f
> > 
> > And, sending my qemu-dm-freebsd-source.log too:
> > 
> > domid: 3
> > ifconfig: not found
> 
> that's strange. Do you have /sbin and /usr/sbin in your path ?
> 
> 
> On Thu, Aug 01, 2013 at 02:50:58PM -0300, Adiel de Lima Ribeiro wrote:
> > >From my Host, tcpdump shows no traffic from xvif*, but I can see arp
> > requests on tap0, because I'm trying to send a ping from Guest to a host
> > on my network.
> 
> Do you also see the arp request on your ethernet interface ?
> 

I don't see any packets in my ethernet interface (bce0), with tcpdump.
I don't have PATH configured, but i will test it now.
If I use device type = vif and not ioemu, the ifconfig: not found don't
appear in the log, but the Vm don't see the network card. 
-- 
att,
Adiel de Lima Ribeiro
facebook.com/sembr.dyndns.info