RE: Reboot on *DOM0* while/after installing GPLPV drivers

[John Hayward <john.hayward%wheaton.edu@localhost>]

In looking at tcpdump on the ethernet of the vif I see:
====
root@johnhxen:xen{567}: tcpdump ether host aa:00:00:50:02:15
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wm0, link-type EN10MB (Ethernet), capture size 96 bytes
15:22:48.906324 arp who-has 10.10.83.115 (aa:00:00:50:02:15 (oui Unknown)) tell 
10.10.82.1
15:23:48.907035 arp who-has 10.10.83.115 (aa:00:00:50:02:15 (oui Unknown)) tell 
10.10.82.1
=====
The number of Opackes grows from 0 at boot to 256 and then is pegged.

johnh...
________________________________________
From: John Hayward
Sent: Monday, October 21, 2013 3:12 PM
To: Manuel Bouyer
Cc: Mike C.; Takahiro HAYASHI; Adiel; port-xen%NetBSD.org@localhost
Subject: RE: Reboot on *DOM0* while/after installing GPLPV drivers

Ok I rebooted so my interface number changed.
so here is brconfig -a (truncated) and netstat -i
=====
root@johnhxen:xen{540}: netstat -I xvif9.0
Name  Mtu   Network       Address              Ipkts Ierrs    Opkts Oerrs Colls
xvif9 1500  <Link>        aa:00:00:51:02:15        0     0       47     0     0
xvif9 1500  fe80::/64     fe80::a800:ff:fe5        0     0       47     0     0
root@johnhxen:xen{541}: brconfig -a
bridge0: flags=41<UP,RUNNING>
        Configuration:
                priority 32768 hellotime 2 fwddelay 15 maxage 20
                ipfilter disabled flags 0x0
        Interfaces:
                xvif9.0 flags=3<LEARNING,DISCOVER>
                        port 12 priority 128
=====
johnh...
________________________________________
From: port-xen-owner%NetBSD.org@localhost [port-xen-owner%NetBSD.org@localhost] 
on behalf of Manuel Bouyer [bouyer%antioche.eu.org@localhost]
Sent: Monday, October 21, 2013 2:59 PM
To: John Hayward
Cc: Mike C.; Takahiro HAYASHI; Adiel; port-xen%NetBSD.org@localhost
Subject: Re: Reboot on *DOM0* while/after installing GPLPV drivers

On Mon, Oct 21, 2013 at 07:56:55PM +0000, John Hayward wrote:
> Thanks for your continued work on this.
> See below for the vif and bridge results of an ifconfig -a (extracted the 
> bridge and particular interface).
> Let me know if there is more info you could use.

Yes, the output of brconfig -a. And also netstat -i

--
Manuel Bouyer <bouyer%antioche.eu.org@localhost>
     NetBSD: 26 ans d'experience feront toujours la difference
--