Port-xen archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
xenkernel42-4.2.4 DOM0 Real Power Off doesnt work
Hi,
i am using NetBSD 6.1.3 , or current, on amd64 with xenkernel42-4.2.4
from the pkgsrc port.
The problem is that no DOM0 machine is going to real power off have to
press the Power Button and hold for 4sec, to turn the Machine off. I am
also using the XEN3_DOM0 Kernel config provided from the NetBSD sources
to build the Kernel.
root: poweroff
Apr 15 20:03:25 cfnetbsd poweroff: powered off by root
Apr 15 20:03:25 cfnetbsd syslogd[441]: Exiting on signal 15
syncing disks... done
wd0: detached
igphy0: detached
wm0: detached
atabus3: detached
atabus2: detached
atabus1: detached
atabus0: detached
sd0: detached
scsibus0: detached
(XEN) Domain 0 halted: halting machine.
then the Machine still do nothing
thanks for helping
My bootlog
__ __ _ _ ____ _ _
\ \/ /___ _ __ | || | |___ \ | || |
\ // _ \ '_ \ | || |_ __) || || |_
/ \ __/ | | | |__ _| / __/ |__ _|
/_/\_\___|_| |_| |_|(_)_____(_) |_|
(XEN) Xen version 4.2.4 (root@) (gcc (NetBSD nb2 20110806) 4.5.3) Tue
Apr 15 16:41:44 CEST 2014
(XEN) Latest ChangeSet: unavailable
(XEN) Bootloader: unknown
(XEN) Command line: dom0_mem=256M cpufreq=dom0-kernel console=com1
com1=9600,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007f7c0000 (usable)
(XEN) 000000007f7c0000 - 000000007f7ce000 (ACPI data)
(XEN) 000000007f7ce000 - 000000007f800000 (ACPI NVS)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) System RAM: 2039MB (2088316kB)
(XEN) ACPI: RSDP 000F9960, 0014 (r0 ACPIAM)
(XEN) ACPI: RSDT 7F7C0000, 0038 (r1 050809 RSDT1007 20090508 MSFT 97)
(XEN) ACPI: FACP 7F7C0200, 0084 (r2 050809 FACP1007 20090508 MSFT 97)
(XEN) ACPI: DSDT 7F7C0440, 4F1D (r1 84DF1 84DF1P06 0 INTL 20051117)
(XEN) ACPI: FACS 7F7CE000, 0040
(XEN) ACPI: APIC 7F7C0390, 006C (r1 050809 APIC1007 20090508 MSFT 97)
(XEN) ACPI: MCFG 7F7C0400, 003C (r1 050809 OEMMCFG 20090508 MSFT 97)
(XEN) ACPI: OEMB 7F7CE040, 0071 (r1 050809 OEMB1007 20090508 MSFT 97)
(XEN) ACPI: HPET 7F7C5360, 0038 (r1 050809 OEMHPET 20090508 MSFT 97)
(XEN) Domain heap initialised
(XEN) Processor #0 7:12 APIC version 20
(XEN) Processor #1 7:12 APIC version 20
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1596.031 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) Brought up 2 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80000000 ->
0xffffffff80e96000
(XEN) Dom0 symbol map 0xffffffff80e96000 -> 0xffffffff80fbf338
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000007a000000->000000007c000000 (57344 pages to
be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80000000->ffffffff80fbf338
(XEN) Init. ramdisk: ffffffff80fc0000->ffffffff80fc0000
(XEN) Phys-Mach map: ffffffff80fc0000->ffffffff81040000
(XEN) Start info: ffffffff81040000->ffffffff810404b4
(XEN) Page tables: ffffffff81041000->ffffffff8104e000
(XEN) Boot stack: ffffffff8104e000->ffffffff8104f000
(XEN) TOTAL: ffffffff80000000->ffffffff81400000
(XEN) ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 240kB init memory.
fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip ffffffff8020ca95 cs e030 rflags 202 cr2 0 ilevel
8 rsp ffffffff81059ed0
curlwp 0xffffffff80ccb9c0 pid 0.1 lowest kstack 0xffffffff810562c0
Stopped in pid 0.1 (system) at netbsd:breakpoint+0x5: leave
breakpoint() at netbsd:breakpoint+0x5
init_x86_64() at netbsd:init_x86_64+0x7e1
ds 9ed0
es 0
fs 63bd
gs 69b8
rdi 8
rsi 0
rbp ffffffff81059ed0
rbx 20
rdx ffffffff80c6b940 cpu_info_primary
rcx 18
rax 0
r8 0
r9 0
r10 aaaaaaaaaaaaaaab
r11 1
r12 ffffffff81056000
r13 0
r14 0
r15 0
rip ffffffff8020ca95 breakpoint+0x5
cs e030
rflags 202
rsp ffffffff81059ed0
ss e02b
netbsd:breakpoint+0x5: leave
db> c
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.40 (IGELPC-CA22) #0: Tue Apr 15 17:24:07 CEST 2014
root@mytinydev-amd64:/home/tmpbuilddir/obj.amd64/sys/arch/amd64/compile/IGELPC-CA22
total memory = 256 MB
avail memory = 232 MB
timecounter: Timecounters tick every 10.000 msec
SMBIOS rev. 2.5 @ 0xfd480 (40 entries)
mainbus0 (root)
ACPI: RSDP 0xf9960 000014 (v00 ACPIAM)
ACPI: RSDT 0x7f7c0000 000038 (v01 050809 RSDT1007 20090508 MSFT 00000097)
ACPI: FACP 0x7f7c0200 000084 (v02 050809 FACP1007 20090508 MSFT 00000097)
ACPI: DSDT 0x7f7c0440 004F1D (v01 84DF1 84DF1P06 00000000 INTL 20051117)
ACPI: FACS 0x7f7ce000 000040
ACPI: APIC 0x7f7c0390 00006C (v01 050809 APIC1007 20090508 MSFT 00000097)
ACPI: MCFG 0x7f7c0400 00003C (v01 050809 OEMMCFG 20090508 MSFT 00000097)
ACPI: OEMB 0x7f7ce040 000071 (v01 050809 OEMB1007 20090508 MSFT 00000097)
ACPI: HPET 0x7f7c5360 000038 (v01 050809 OEMHPET 20090508 MSFT 00000097)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0
cpu1 at mainbus0 apid 1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=000109f0
(XEN) ioapic_guest_write: old_entry=00010000 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=000109f0
(XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1879: dom0: pirq 0 or irq 3 already mapped
(XEN) ioapic_guest_write: apic=0, pin=4, irq=4
(XEN) ioapic_guest_write: new_entry=000109f1
(XEN) ioapic_guest_write: old_entry=000009f1 pirq=0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1879: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1879: dom0: pirq 0 or irq 13 already mapped
ioapic0: misconfigured as apic 1
ioapic0: can't remap to apid 2
hypervisor0 at mainbus0: Xen version 4.2.4
VIRQ_DEBUG interrupt using event channel 1
vcpu0 at hypervisor0vcpu0: 16 page colors
: Intel(R) Atom(TM) CPU 230 @ 1.60GHz, id 0x106c2
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console major 143, unit 0
xencons0: using event channel 2
acpi0 at hypervisor0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <050809,RSDT1007,20090508>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpi0: ACPI-Safe 24-bit timer
MCH (PNP0C01) at acpi0 not configured
TMR (PNP0100) at acpi0 not configured
pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
UAR1 (PNP0501) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
HPET (PNP0103) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (THRM)
acpitz0: polling interval 30.0 seconds
acpitz0: levels: critical 65.0 C, passive cooling
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-646)
pckbdprobe: reset error 5
pmsprobe: reset error 5
pci0 at hypervisor0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2770 (rev. 0x02)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2772 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23, event channel 4
usb0 at uhci0: USB revision 1.0
usb0: WARNING: power management not supported
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19, event channel 5
usb1 at uhci1: USB revision 1.0
usb1: WARNING: power management not supported
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18, event channel 6
usb2 at uhci2: USB revision 1.0
usb2: WARNING: power management not supported
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16, event channel 7
usb3 at uhci3: USB revision 1.0
usb3: WARNING: power management not supported
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23, event channel 4
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
usb4: WARNING: power management not supported
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
wm0 at pci1 dev 2 function 0: Intel i82541PI 1000BASE-T Ethernet (rev. 0x05)
wm0: interrupting at ioapic0 pin 17, event channel 8
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 90:e2:ba:27:65:eb
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
rtk0 at pci1 dev 6 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 19, event channel 5
rtk0: Ethernet address 00:22:68:2f:01:67
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev.
0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller
(ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14, event channel 9
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15, event channel 10
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid
Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19, event channel 5 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
vendor 0x8086 product 0x27da (SMBus serial bus, revision 0x01) at pci0
dev 31 function 3 not configured
isa0 at ichlpcib0
Initializing SSP: bcd543d86822044a b4fa91df7813157b c23f1d68fda2eb48
94fa83953a3fd726 cf44759008aea286 e57b6f6549154271 8e29be556871187a
953188877fe37ebf
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz
quality 10000
Xen clock: using event channel 11
xenbus0: using event channel 12
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0 at uhub4 port 6 configuration 1 interface 0
umass0: vendor 0x13fe USB DISK 2.0, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <, USB DISK 2.0, PMAP> disk removable
sd0: 981 MB, 3924 cyl, 16 head, 32 sec, 512 bytes/sect x 2009088 sectors
ehci0: handing over low speed device on port 8 to uhci3
uhub4: port 8, device disappeared after reset
wd0 at atabus3 drive 0
wd0: <FUJITSU MHV2040BH PL>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA)
crypto: assign driver 1, flags 2
crypto: driver 1 registers alg 1 flags 0 maxoplen 0
crypto: driver 1 registers alg 2 flags 0 maxoplen 0
crypto: driver 1 registers alg 3 flags 0 maxoplen 0
crypto: driver 1 registers alg 4 flags 0 maxoplen 0
crypto: driver 1 registers alg 5 flags 0 maxoplen 0
crypto: driver 1 registers alg 26 flags 0 maxoplen 0
crypto: driver 1 registers alg 27 flags 0 maxoplen 0
crypto: driver 1 registers alg 29 flags 0 maxoplen 0
crypto: driver 1 registers alg 33 flags 0 maxoplen 0
crypto: driver 1 registers alg 17 flags 0 maxoplen 0
crypto: driver 1 registers alg 6 flags 0 maxoplen 0
crypto: driver 1 registers alg 19 flags 0 maxoplen 0
crypto: driver 1 registers alg 7 flags 0 maxoplen 0
crypto: driver 1 registers alg 20 flags 0 maxoplen 0
crypto: driver 1 registers alg 15 flags 0 maxoplen 0
crypto: driver 1 registers alg 24 flags 0 maxoplen 0
crypto: driver 1 registers alg 25 flags 0 maxoplen 0
crypto: driver 1 registers alg 8 flags 0 maxoplen 0
crypto: driver 1 registers alg 21 flags 0 maxoplen 0
crypto: driver 1 registers alg 16 flags 0 maxoplen 0
crypto: driver 1 registers alg 9 flags 0 maxoplen 0
crypto: driver 1 registers alg 10 flags 0 maxoplen 0
crypto: driver 1 registers alg 13 flags 0 maxoplen 0
crypto: driver 1 registers alg 14 flags 0 maxoplen 0
crypto: driver 1 registers alg 28 flags 0 maxoplen 0
crypto: driver 1 registers alg 30 flags 0 maxoplen 0
crypto: driver 1 registers alg 31 flags 0 maxoplen 0
crypto: driver 1 registers alg 32 flags 0 maxoplen 0
crypto: driver 1 registers alg 11 flags 0 maxoplen 0
crypto: driver 1 registers alg 18 flags 0 maxoplen 0
crypto: driver 1 registers alg 23 flags 0 maxoplen 0
crypto: driver 1 registers alg 22 flags 0 maxoplen 0
Kernelized RAIDframe activated
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
Supported file systems: union umap tmpfs smbfs puffs ptyfs procfs
overlay null ntfs nfs msdos mfs lfs kernfs fdesc ext2fs ffs coda cd9660
no file system for wd0 (dev 0x0)
cannot mount root, error = 79
root device (default wd0a): sd0a
dump device (default sd0b):
file system (default generic):
root on sd0a dumps on sd0b
root file system type: ffs
warning: no /dev/console
init path (default /sbin/init):
init: trying /sbin/init
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: vendor 0x1241 USB Keyboard, rev 1.10/2.80, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1
uhidev1: vendor 0x1241 USB Keyboard, rev 1.10/2.80, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
Initializing system...
Home |
Main Index |
Thread Index |
Old Index