Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/external/gpl2/dts/dist merge conflicts
details: https://anonhg.NetBSD.org/src/rev/364350e2dc78
branches: trunk
changeset: 318545:364350e2dc78
user: jmcneill <jmcneill%NetBSD.org@localhost>
date: Sat Apr 28 18:28:25 2018 +0000
description:
merge conflicts
diffstat:
sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi | 10 +-
sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi | 24 +-
sys/external/gpl2/dts/dist/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts | 94 --
sys/external/gpl2/dts/dist/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 99 --
sys/external/gpl2/dts/dist/arch/arm/boot/dts/imx6qdl-microsom.dtsi | 161 ---
sys/external/gpl2/dts/dist/arch/arm/boot/dts/imx7d-pico.dts | 442 ---------
sys/external/gpl2/dts/dist/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi | 68 -
sys/external/gpl2/dts/dist/arch/arm/boot/dts/wd-mbwe.dts | 112 --
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 443 ----------
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 441 ---------
sys/external/gpl2/dts/dist/include/dt-bindings/input/linux-event-codes.h | 3 +-
11 files changed, 31 insertions(+), 1866 deletions(-)
diffs (truncated from 2022 to 300 lines):
diff -r 178e6dafe74d -r 364350e2dc78 sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi Sat Apr 28 18:26:53 2018 +0000
+++ b/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi Sat Apr 28 18:28:25 2018 +0000
@@ -18,7 +18,9 @@
soc {
firmware: firmware {
- compatible = "raspberrypi,bcm2835-firmware";
+ compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+ #address-cells = <0>;
+ #size-cells = <0>;
mboxes = <&mailbox>;
};
@@ -27,6 +29,12 @@
firmware = <&firmware>;
#power-domain-cells = <1>;
};
+
+ mailbox@7e00b840 {
+ compatible = "brcm,bcm2835-vchiq";
+ reg = <0x7e00b840 0xf>;
+ interrupts = <0 2>;
+ };
};
};
diff -r 178e6dafe74d -r 364350e2dc78 sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi Sat Apr 28 18:26:53 2018 +0000
+++ b/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi Sat Apr 28 18:28:25 2018 +0000
@@ -2,6 +2,7 @@
#include <dt-bindings/clock/bcm2835.h>
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/* firmware-provided startup stubs live here, where the secondary CPUs are
* spinning.
@@ -222,6 +223,7 @@
gpclk2_gpio43: gpclk2_gpio43 {
brcm,pins = <43>;
brcm,function = <BCM2835_FSEL_ALT0>;
+ brcm,pull = <BCM2835_PUD_OFF>;
};
i2c0_gpio0: i2c0_gpio0 {
@@ -251,7 +253,7 @@
jtag_gpio4: jtag_gpio4 {
brcm,pins = <4 5 6 12 13>;
- brcm,function = <BCM2835_FSEL_ALT4>;
+ brcm,function = <BCM2835_FSEL_ALT5>;
};
jtag_gpio22: jtag_gpio22 {
brcm,pins = <22 23 24 25 26 27>;
@@ -334,10 +336,12 @@
uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
brcm,pins = <30 31>;
brcm,function = <BCM2835_FSEL_ALT3>;
+ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
};
uart0_gpio32: uart0_gpio32 {
brcm,pins = <32 33>;
brcm,function = <BCM2835_FSEL_ALT3>;
+ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
};
uart0_gpio36: uart0_gpio36 {
brcm,pins = <36 37>;
@@ -396,8 +400,8 @@
i2s: i2s@7e203000 {
compatible = "brcm,bcm2835-i2s";
- reg = <0x7e203000 0x20>,
- <0x7e101098 0x02>;
+ reg = <0x7e203000 0x24>;
+ clocks = <&clocks BCM2835_CLOCK_PCM>;
dmas = <&dma 2>,
<&dma 3>;
@@ -437,6 +441,17 @@
interrupts = <2 14>; /* pwa1 */
};
+ dpi: dpi@7e208000 {
+ compatible = "brcm,bcm2835-dpi";
+ reg = <0x7e208000 0x8c>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>,
+ <&clocks BCM2835_CLOCK_DPI>;
+ clock-names = "core", "pixel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
dsi0: dsi@7e209000 {
compatible = "brcm,bcm2835-dsi0";
reg = <0x7e209000 0x78>;
@@ -464,7 +479,7 @@
status = "disabled";
};
- aux: aux@0x7e215000 {
+ aux: aux@7e215000 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
reg = <0x7e215000 0x8>;
@@ -654,5 +669,6 @@
usbphy: phy {
compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
};
};
diff -r 178e6dafe74d -r 364350e2dc78 sys/external/gpl2/dts/dist/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts Sat Apr 28 18:26:53 2018 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,94 +0,0 @@
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong%baylibre.com@localhost>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
- model = "Cloud Engines PogoPlug Series 3";
-
- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
- chosen {
- bootargs = "earlyprintk";
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- /* 128Mbytes DDR */
- reg = <0x60000000 0x8000000>;
- };
-
- aliases {
- serial0 = &uart0;
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- };
-
- leds {
- compatible = "gpio-leds";
-
- blue {
- label = "pogoplug:blue";
- gpios = <&gpio0 2 0>;
- default-state = "keep";
- };
-
- orange {
- label = "pogoplug:orange";
- gpios = <&gpio1 16 1>;
- default-state = "keep";
- };
-
- green {
- label = "pogoplug:green";
- gpios = <&gpio1 17 1>;
- default-state = "keep";
- };
- };
-};
-
-&uart0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand>;
-
- nand@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- nand-ecc-mode = "soft";
- nand-ecc-algo = "hamming";
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00e00000>;
- read-only;
- };
-
- partition@e00000 {
- label = "ubi";
- reg = <0x00e00000 0x07200000>;
- };
- };
-};
-
-ða {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff -r 178e6dafe74d -r 364350e2dc78 sys/external/gpl2/dts/dist/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi Sat Apr 28 18:26:53 2018 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
- * MicroSOM.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
- phy-mode = "rgmii";
- phy-reset-duration = <2>;
- phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&iomuxc {
- enet {
- pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- /* AR8035 reset */
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0
- /* AR8035 interrupt */
- MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x80000000
- /* GPIO16 -> AR8035 25MHz */
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
- /* AR8035 pin strapping: IO voltage: pull up */
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- /* AR8035 pin strapping: PHYADDR#0: pull down */
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
- /* AR8035 pin strapping: PHYADDR#1: pull down */
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
- /* AR8035 pin strapping: MODE#1: pull up */
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- /* AR8035 pin strapping: MODE#3: pull up */
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- /* AR8035 pin strapping: MODE#0: pull down */
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
-
Home |
Main Index |
Thread Index |
Old Index