Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/usr.bin/make/unit-tests make(1): clean up some tests
details: https://anonhg.NetBSD.org/src/rev/e25996d73846
branches: trunk
changeset: 978289:e25996d73846
user: rillig <rillig%NetBSD.org@localhost>
date: Sun Nov 15 14:07:53 2020 +0000
description:
make(1): clean up some tests
Fix some mistakes in comments.
Improve some comments to be easier understandable.
Inline variables that are irrelevant for the test at hand (RUN,
MAKE_CMD).
Remove references to functions and constants that have since been removed
or renamed.
diffstat:
usr.bin/make/unit-tests/archive-suffix.mk | 4 +-
usr.bin/make/unit-tests/archive.mk | 30 ++++++++++------------
usr.bin/make/unit-tests/cmd-interrupt.mk | 4 +-
usr.bin/make/unit-tests/cmdline.mk | 11 +++----
usr.bin/make/unit-tests/comment.mk | 12 ++++++---
usr.bin/make/unit-tests/cond-cmp-string.exp | 8 +++---
usr.bin/make/unit-tests/cond-cmp-string.mk | 17 +++++++++---
usr.bin/make/unit-tests/cond-func-commands.mk | 5 ++-
usr.bin/make/unit-tests/cond-func-defined.exp | 3 ++
usr.bin/make/unit-tests/cond-func-defined.mk | 14 +++++++++-
usr.bin/make/unit-tests/cond-func-empty.exp | 4 +-
usr.bin/make/unit-tests/cond-func-empty.mk | 36 ++++++++++++++------------
usr.bin/make/unit-tests/cond-func.exp | 24 +++++++++---------
usr.bin/make/unit-tests/cond-func.mk | 6 +++-
usr.bin/make/unit-tests/cond-late.mk | 12 +++++---
15 files changed, 110 insertions(+), 80 deletions(-)
diffs (truncated from 465 to 300 lines):
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/archive-suffix.mk
--- a/usr.bin/make/unit-tests/archive-suffix.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/archive-suffix.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,11 +1,11 @@
-# $NetBSD: archive-suffix.mk,v 1.2 2020/11/07 00:07:02 rillig Exp $
+# $NetBSD: archive-suffix.mk,v 1.3 2020/11/15 14:07:53 rillig Exp $
#
# Between 2020-08-23 and 2020-08-30, the below code produced an assertion
# failure in Var_SetWithFlags, triggered by Compat_Make, when setting the
# .IMPSRC of an archive node to its .TARGET.
#
# The code assumed that the .TARGET variable of every node would be set, but
-# but that is not guaranteed.
+# that is not guaranteed.
#
# Between 2016-03-15 and 2016-03-16 the behavior of the below code changed.
# Until 2016-03-15, it remade the target, starting with 2016-03-16 it says
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/archive.mk
--- a/usr.bin/make/unit-tests/archive.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/archive.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,18 +1,15 @@
-# $NetBSD: archive.mk,v 1.10 2020/10/09 06:44:42 rillig Exp $
+# $NetBSD: archive.mk,v 1.11 2020/11/15 14:07:53 rillig Exp $
#
# Very basic demonstration of handling archives, based on the description
# in PSD.doc/tutorial.ms.
#
# This test aims at covering the code, not at being an introduction to
-# archive handling. That's why it is more complicated and detailed than
-# strictly necessary.
+# archive handling. That's why it deviates from the tutorial style of
+# several other tests.
ARCHIVE= libprog.a
FILES= archive.mk modmisc.mk varmisc.mk
-MAKE_CMD= ${.MAKE} -f ${MAKEFILE}
-RUN?= @set -eu;
-
all:
.if ${.PARSEDIR:tA} != ${.CURDIR:tA}
@cd ${MAKEFILE:H} && cp ${FILES} [at]*.mk ${.CURDIR}
@@ -20,13 +17,13 @@
# The following targets create and remove files. The filesystem cache in
# dir.c would probably not handle this correctly, therefore each of the
# targets is run in its separate sub-make.
- ${RUN} ${MAKE_CMD} remove-archive
- ${RUN} ${MAKE_CMD} create-archive
- ${RUN} ${MAKE_CMD} list-archive
- ${RUN} ${MAKE_CMD} list-archive-wildcard
- ${RUN} ${MAKE_CMD} depend-on-existing-member
- ${RUN} ${MAKE_CMD} depend-on-nonexistent-member
- ${RUN} ${MAKE_CMD} remove-archive
+ @${MAKE} -f ${MAKEFILE} remove-archive
+ @${MAKE} -f ${MAKEFILE} create-archive
+ @${MAKE} -f ${MAKEFILE} list-archive
+ @${MAKE} -f ${MAKEFILE} list-archive-wildcard
+ @${MAKE} -f ${MAKEFILE} depend-on-existing-member
+ @${MAKE} -f ${MAKEFILE} depend-on-nonexistent-member
+ @${MAKE} -f ${MAKEFILE} remove-archive
create-archive: ${ARCHIVE} pre post
@@ -43,15 +40,16 @@
# XXX: I had expected that this dependency would select all *.mk files from
# the archive. Instead, the globbing is done in the current directory.
+#
# To prevent an overly long file list, the pattern is restricted to [at]*.mk.
list-archive-wildcard: ${ARCHIVE}([at]*.mk) pre post
- ${RUN} printf '%s\n' ${.ALLSRC:O:@member@${.TARGET:Q}': '${member:Q}@}
+ @printf '%s\n' ${.ALLSRC:O:@member@${.TARGET:Q}': '${member:Q}@}
depend-on-existing-member: ${ARCHIVE}(archive.mk) pre post
- ${RUN} echo $@
+ @echo $@
depend-on-nonexistent-member: ${ARCHIVE}(nonexistent.mk) pre post
- ${RUN} echo $@
+ @echo $@
remove-archive: pre post
rm -f ${ARCHIVE}
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/cmd-interrupt.mk
--- a/usr.bin/make/unit-tests/cmd-interrupt.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/cmd-interrupt.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: cmd-interrupt.mk,v 1.2 2020/08/28 18:16:22 rillig Exp $
+# $NetBSD: cmd-interrupt.mk,v 1.3 2020/11/15 14:07:53 rillig Exp $
#
# Tests for interrupting a command.
#
@@ -22,7 +22,7 @@
clean-before clean-after: .PHONY
@rm -f cmd-interrupt-ordinary cmd-interrupt-phony cmd-interrupt-precious
-interrupt-ordinary: .PHONY
+interrupt-ordinary:
@${.MAKE} ${MAKEFLAGS} -f ${MAKEFILE} cmd-interrupt-ordinary || true
# The ././ is necessary to work around the file cache.
@echo ${.TARGET}: ${exists(././cmd-interrupt-ordinary) :? error : ok }
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/cmdline.mk
--- a/usr.bin/make/unit-tests/cmdline.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/cmdline.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,8 +1,7 @@
-# $NetBSD: cmdline.mk,v 1.1 2020/07/28 22:44:44 rillig Exp $
+# $NetBSD: cmdline.mk,v 1.2 2020/11/15 14:07:53 rillig Exp $
#
# Tests for command line parsing and related special variables.
-RUN?= @set -eu;
TMPBASE?= /tmp
SUB1= a7b41170-53f8-4cc2-bc5c-e4c3dd93ec45 # just a random UUID
SUB2= 6a8899d2-d227-4b55-9b6b-f3c8eeb83fd5 # just a random UUID
@@ -14,14 +13,14 @@
all: makeobjdir-direct makeobjdir-indirect
prepare-dirs:
- ${RUN} rm -rf ${DIR2} ${DIR12}
- ${RUN} mkdir -p ${DIR2} ${DIR12}
+ @rm -rf ${DIR2} ${DIR12}
+ @mkdir -p ${DIR2} ${DIR12}
# The .OBJDIR can be set via the MAKEOBJDIR command line variable.
# It must be a command line variable; an environment variable would not work.
makeobjdir-direct:
@echo $@:
- ${RUN} ${MAKE_CMD} MAKEOBJDIR=${DIR2} show-objdir
+ @${MAKE_CMD} MAKEOBJDIR=${DIR2} show-objdir
# The .OBJDIR can be set via the MAKEOBJDIR command line variable,
# and that variable could even contain the usual modifiers.
@@ -31,7 +30,7 @@
# see MAKE_CMD.
makeobjdir-indirect:
@echo $@:
- ${RUN} ${MAKE_CMD} MAKEOBJDIR='$${TMPBASE}/$${SUB2}' show-objdir
+ @${MAKE_CMD} MAKEOBJDIR='$${TMPBASE}/$${SUB2}' show-objdir
show-objdir:
@echo $@: ${.OBJDIR:Q}
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/comment.mk
--- a/usr.bin/make/unit-tests/comment.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/comment.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: comment.mk,v 1.2 2020/09/07 19:17:36 rillig Exp $
+# $NetBSD: comment.mk,v 1.3 2020/11/15 14:07:53 rillig Exp $
#
# Demonstrate how comments are written in makefiles.
@@ -12,7 +12,7 @@
goes \
on and on.
- # Comments can be indented, but that is rather unusual.
+ # Comments can be indented with spaces, but that is rather unusual.
# Comments can be indented with a tab.
# These are not shell commands, they are just makefile comments.
@@ -21,6 +21,8 @@
.endif # And after the closing directive.
VAR= # This comment makes the variable value empty.
+ # ParseGetLine removes any whitespace before the
+ # comment.
.if ${VAR} != ""
. error
.endif
@@ -35,7 +37,9 @@
. error
.endif
-# This is NOT an escaped comment due to the double backslashes \\
+# This comment ends with 2 backslashes. An even number of backslashes does
+# not count as a line continuation, therefore the variable assignment that
+# follows is actively interpreted. \\
VAR= not part of the comment
.if ${VAR} != "not part of the comment"
. error
@@ -55,7 +59,7 @@
. error
.endif
-# An odd number of comment signs makes a line continuation, \\\
+# An odd number of backslashes makes a line continuation, \\\
no matter if it is 3 or 5 \\\\\
or 9 backslashes. \\\\\\\\\
This is the last line of the comment.
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/cond-cmp-string.exp
--- a/usr.bin/make/unit-tests/cond-cmp-string.exp Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/cond-cmp-string.exp Sun Nov 15 14:07:53 2020 +0000
@@ -1,8 +1,8 @@
make: "cond-cmp-string.mk" line 18: Malformed conditional (str != str)
-make: "cond-cmp-string.mk" line 37: Malformed conditional ("string" != "str""ing")
-make: "cond-cmp-string.mk" line 42: warning: String comparison operator must be either == or !=
-make: "cond-cmp-string.mk" line 42: Malformed conditional (!("value" = "value"))
-make: "cond-cmp-string.mk" line 49: Malformed conditional (!("value" === "value"))
+make: "cond-cmp-string.mk" line 42: Malformed conditional ("string" != "str""ing")
+make: "cond-cmp-string.mk" line 49: warning: String comparison operator must be either == or !=
+make: "cond-cmp-string.mk" line 49: Malformed conditional (!("value" = "value"))
+make: "cond-cmp-string.mk" line 56: Malformed conditional (!("value" === "value"))
make: Fatal errors encountered -- cannot continue
make: stopped in unit-tests
exit status 1
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/cond-cmp-string.mk
--- a/usr.bin/make/unit-tests/cond-cmp-string.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/cond-cmp-string.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: cond-cmp-string.mk,v 1.12 2020/11/08 23:00:09 rillig Exp $
+# $NetBSD: cond-cmp-string.mk,v 1.13 2020/11/15 14:07:53 rillig Exp $
#
# Tests for string comparisons in .if conditions.
@@ -19,9 +19,14 @@
. error
.endif
-# The left-hand side of the comparison requires a defined variable.
-# The variable named "" is not defined, but applying the :U modifier to it
-# makes it "kind of defined" (see VAR_KEEP). Therefore it is ok here.
+# The left-hand side of the comparison requires that any variable expression
+# is defined.
+#
+# The variable named "" is never defined, nevertheless it can be used as a
+# starting point for variable expressions. Applying the :U modifier to such
+# an undefined expression turns it into a defined expression.
+#
+# See ApplyModifier_Defined and VEF_DEF.
.if ${:Ustr} != "str"
. error
.endif
@@ -33,9 +38,11 @@
.endif
# It is not possible to concatenate two string literals to form a single
-# string.
+# string. In C, Python and the shell this is possible, but not in make.
.if "string" != "str""ing"
. error
+.else
+. error
.endif
# There is no = operator for strings.
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/cond-func-commands.mk
--- a/usr.bin/make/unit-tests/cond-func-commands.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/cond-func-commands.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,10 +1,11 @@
-# $NetBSD: cond-func-commands.mk,v 1.4 2020/10/24 08:46:08 rillig Exp $
+# $NetBSD: cond-func-commands.mk,v 1.5 2020/11/15 14:07:53 rillig Exp $
#
# Tests for the commands() function in .if conditions.
.MAIN: all
-# The target "target" does not exist yet, therefore it cannot have commands.
+# At this point, the target 'target' does not exist yet, therefore it cannot
+# have commands. Sounds obvious, but good to know that it is really so.
.if commands(target)
. error
.endif
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/cond-func-defined.exp
--- a/usr.bin/make/unit-tests/cond-func-defined.exp Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/cond-func-defined.exp Sun Nov 15 14:07:53 2020 +0000
@@ -2,6 +2,9 @@
make: "cond-func-defined.mk" line 23: Malformed conditional (!defined(A B))
make: "cond-func-defined.mk" line 33: warning: Missing closing parenthesis for defined()
make: "cond-func-defined.mk" line 33: Malformed conditional (defined(DEF)
+make: "cond-func-defined.mk" line 45: In .for loops, variable expressions for the loop variables are
+make: "cond-func-defined.mk" line 46: substituted at evaluation time. There is no actual variable
+make: "cond-func-defined.mk" line 47: involved, even if it feels like it.
make: Fatal errors encountered -- cannot continue
make: stopped in unit-tests
exit status 1
diff -r 8347c3459d0a -r e25996d73846 usr.bin/make/unit-tests/cond-func-defined.mk
--- a/usr.bin/make/unit-tests/cond-func-defined.mk Sun Nov 15 14:04:26 2020 +0000
+++ b/usr.bin/make/unit-tests/cond-func-defined.mk Sun Nov 15 14:07:53 2020 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: cond-func-defined.mk,v 1.6 2020/11/07 14:40:51 rillig Exp $
+# $NetBSD: cond-func-defined.mk,v 1.7 2020/11/15 14:07:53 rillig Exp $
#
# Tests for the defined() function in .if conditions.
@@ -36,5 +36,17 @@
. error
.endif
+# Variables from .for loops are not defined.
+# See directive-for.mk for more details.
+.for var in value
+. if defined(var)
+. error
+. else
+. info In .for loops, variable expressions for the loop variables are
+. info substituted at evaluation time. There is no actual variable
+. info involved, even if it feels like it.
+. endif
+.endfor
+
all:
Home |
Main Index |
Thread Index |
Old Index