Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch G/C GOLDENGATE
details: https://anonhg.NetBSD.org/src/rev/7d432feedf18
branches: trunk
changeset: 993467:7d432feedf18
user: skrll <skrll%NetBSD.org@localhost>
date: Thu Sep 13 18:55:01 2018 +0000
description:
G/C GOLDENGATE
diffstat:
sys/arch/arm/cortina/files.g2 | 96 ------------
sys/arch/arm/cortina/g2_intr.h | 166 ---------------------
sys/arch/arm/cortina/g2_reg.h | 117 ---------------
sys/arch/evbarm/conf/GOLDENGATE | 257 ----------------------------------
sys/arch/evbarm/conf/files.goldengate | 9 -
sys/arch/evbarm/conf/mk.goldengate | 34 ----
sys/arch/evbarm/conf/std.goldengate | 30 ---
7 files changed, 0 insertions(+), 709 deletions(-)
diffs (truncated from 737 to 300 lines):
diff -r 84ac565bcbc0 -r 7d432feedf18 sys/arch/arm/cortina/files.g2
--- a/sys/arch/arm/cortina/files.g2 Thu Sep 13 14:44:09 2018 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,96 +0,0 @@
-# $NetBSD: files.g2,v 1.2 2014/07/13 17:12:23 dholland Exp $
-#
-# Configuration info for Broadcom BCM5301X ARM Peripherals
-#
-
-include "arch/arm/pic/files.pic"
-include "arch/arm/cortex/files.cortex"
-
-file arch/arm/arm32/arm32_boot.c
-file arch/arm/arm32/arm32_kvminit.c
-file arch/arm/arm32/arm32_reboot.c
-file arch/arm/arm32/irq_dispatch.S
-
-file arch/arm/cortina/g2_board.c
-file arch/arm/broadcom/bcmgen_space.c
-
-# Console parameters
-defparam opt_cortina.h CONADDR
-defparam opt_cortina.h CONSPEED
-defparam opt_cortina.h CONMODE
-defparam opt_cortina.h MEMSIZE
-defflag opt_cortina.h G2_CONSOLE_EARLY
-defflag opt_cortina.h G2ETH_COUNTERS
-
-# G2 Peripheral attach point
-device g2periph { [channel=-1] } : bus_space_generic
-attach g2periph at mainbus
-file arch/arm/cortina/g2_periph.c g2periph needs-flag
-
-device g2com { } : tty
-attach g2com at g2periph with g2com
-file arch/arm/cortina/g2_com.c g2com
-
-device g2pcie : pcibus
-attach g2pcie at g2periph
-file arch/arm/cortina/g2_pcie.c g2pcie
-
-device g2i2c : i2cbus, i2cexec
-attach g2i2c at g2periph with bcmi2c_ccb
-file arch/arm/cortina/g2_i2c.c g2i2c
-
-device g2trng
-attach g2trng at g2periph
-file arch/arm/cortina/g2_trng.c g2trng needs-flag
-
-device g2mdio : mii
-attach g2mdio at g2periph
-file arch/arm/cortina/g2_mdio.c g2mdio
-
-device g2eth { } : ether, ifnet, arp
-attach g2eth at g2periph
-file arch/arm/cortina/g2_eth.c g2eth
-
-# USB2 Host Controller (EHCI)
-attach ohci at g2periph with g2ohci
-attach ehci at g2periph with g2ehci
-file arch/arm/cortina/g2_ohci.c g2ohci
-file arch/arm/cortina/g2_ehci.c g2ehci
-
-# External Mass Media Controller (SDHC)
-attach sdhc at g2periph with g2sdhc
-file arch/arm/cortina/g2_sdhc.c g2sdhc
-
-# Advanced Host Controller Interface (SATA)
-attach ahcisata at g2periph with g2ahci
-file arch/arm/cortina/g2_ahci.c g2ahci
-
-# Crypto Engine
-device g2sec : opencrypto
-attach g2sec at g2periph
-file arch/arm/cortina/g2_sec.c g2sec
-
-# Real Time Clock
-device g2rtc
-attach g2rtc at g2periph
-file arch/arm/cortina/g2_rtc.c g2rtc
-
-# General Purpose I/O
-device g2gpio : gpiobus
-attach g2gpio at g2periph
-file arch/arm/cortina/g2_gpio.c g2gpio
-
-# Serial Peripheral Interface
-device g2spi : spibus
-attach g2spi at g2periph
-file arch/arm/cortina/g2_spi.c g2spi
-
-# Flash (NAND)
-device g2flash : nandbus
-attach g2flash at g2periph
-file arch/arm/cortina/g2_flash.c g2flash
-
-# Sony/Philips Digital Interconnect Format
-device g2spdif : audiobus
-attach g2spdif at g2periph
-file arch/arm/cortina/g2_spdif.c g2spdif
diff -r 84ac565bcbc0 -r 7d432feedf18 sys/arch/arm/cortina/g2_intr.h
--- a/sys/arch/arm/cortina/g2_intr.h Thu Sep 13 14:44:09 2018 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,166 +0,0 @@
-/* $NetBSD: g2_intr.h,v 1.1 2013/02/19 16:07:23 matt Exp $ */
-/*-
- * Copyright (c) 2013 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Matt Thomas of 3am Software Foundry.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ARM_CORTINA_G2_INTR_H_
-#define _ARM_CORTINA_G2_INTR_H_
-
-#define PIC_G2_GIC_MAXSOURCES 80
-#define PIC_G2_REGBUS_MAXSOURCES 16
-#define PIC_G2_PCIE_MAXSOURCES 8 /* times 3 */
-#define PIC_G2_DMAENG_MAXSOURCES 20
-#define PIC_G2_DMASSP_MAXSOURCES 16
-#define PIC_G2_GPIO_MAXSOURCES 32 /* times 5 */
-
-#define PIC_MAXSOURCES PIC_G2_GIC_MAXSOURCES
-#define PIC_MAXMAXSOURCES \
- (PIC_G2_GIC_MAXSOURCES + PIC_G2_REGBUS_MAXSOURCES \
- + 3*PIC_G2_PCIE_MAXSOURCES + PIC_G2_DMAENG_MAXSOURCES \
- + PIC_G2_DMASSP_MAXSOURCES + 5 * PIC_G2_GPIO_MAXSOURCES)
-
-#define PIC_G2_GIC_BASE 0
-#define PIC_G2_REGBUS_BASE PIC_G2_GIC_MAXSOURCES
-#define PIC_G2_PCIE0_BASE (PIC_G2_REGBUS_BASE + PIC_G2_REGBUS_MAXSOURCES)
-#define PIC_G2_PCIE1_BASE (PIC_G2_PCIE0_BASE + PIC_G2_PCIE_MAXSOURCES)
-#define PIC_G2_PCIE2_BASE (PIC_G2_PCIE1_BASE + PIC_G2_PCIE_MAXSOURCES)
-#define PIC_G2_DMAENG_BASE (PIC_G2_PCIE2_BASE + PIC_G2_PCIE_MAXSOURCES)
-#define PIC_G2_DMASSP_BASE (PIC_G2_DMAENG_BASE + PIC_G2_DMAENG_MAXSOURCES)
-#define PIC_G2_GPIO0_BASE (PIC_G2_DMASSP_BASE + PIC_G2_DMASSP_MAXSOURCES)
-#define PIC_G2_GPIO1_BASE (PIC_G2_GPIO0_BASE + PIC_G2_GPIO_MAXSOURCES)
-#define PIC_G2_GPIO2_BASE (PIC_G2_GPIO1_BASE + PIC_G2_GPIO_MAXSOURCES)
-#define PIC_G2_GPIO3_BASE (PIC_G2_GPIO2_BASE + PIC_G2_GPIO_MAXSOURCES)
-#define PIC_G2_GPIO4_BASE (PIC_G2_GPIO3_BASE + PIC_G2_GPIO_MAXSOURCES)
-
-/*
- * The BCM53xx uses a generic interrupt controller so pull that stuff.
- */
-#include <arm/cortex/gic_intr.h>
-#include <arm/cortex/a9tmr_intr.h> /* A9 Timer PPIs */
-
-#define IRQ_GLOBAL_SYS (PIC_G2_GIC_BASE + 32)
-#define IRQ_NETENG (PIC_G2_GIC_BASE + 33)
-#define IRQ_ARM_PARITY (PIC_G2_GIC_BASE + 34)
-#define IRQ_PERIPH_REGBUS (PIC_G2_GIC_BASE + 35)
-#define IRQ_L2_CTRL (PIC_G2_GIC_BASE + 36)
-#define IRQ_SDRAM_CTRL (PIC_G2_GIC_BASE + 37)
-#define IRQ_UART0 (PIC_G2_GIC_BASE + 38)
-#define IRQ_UART1 (PIC_G2_GIC_BASE + 39)
-#define IRQ_UART2 (PIC_G2_GIC_BASE + 40)
-#define IRQ_UART3 (PIC_G2_GIC_BASE + 41)
-#define IRQ_RTC_ALARM (PIC_G2_GIC_BASE + 42)
-#define IRQ_RTC_PERIODIC (PIC_G2_GIC_BASE + 43)
-#define IRQ_WAKEONLAN0 (PIC_G2_GIC_BASE + 44)
-#define IRQ_WAKEONLAN1 (PIC_G2_GIC_BASE + 45)
-#define IRQ_WAKEONLAN2 (PIC_G2_GIC_BASE + 46)
-#define IRQ_DMA (PIC_G2_GIC_BASE + 47)
-#define IRQ_SW0 (PIC_G2_GIC_BASE + 48)
-#define IRQ_SW1 (PIC_G2_GIC_BASE + 49)
-#define IRQ_FLASH_CTRL (PIC_G2_GIC_BASE + 50)
-#define IRQ_TS_CTRL (PIC_G2_GIC_BASE + 51)
-#define IRQ_CIR_CTRL (PIC_G2_GIC_BASE + 52)
-#define IRQ_PWR_CTRL (PIC_G2_GIC_BASE + 53)
-#define IRQ_RECIRC_MB0 (PIC_G2_GIC_BASE + 54)
-#define IRQ_RECIRC_MB1 (PIC_G2_GIC_BASE + 55)
-#define IRQ_CRYPTO_ENG0 (PIC_G2_GIC_BASE + 56)
-#define IRQ_CRYPTO_ENG1 (PIC_G2_GIC_BASE + 57)
-#define IRQ_SDMMC (PIC_G2_GIC_BASE + 58)
-#define IRQ_ARM_CTIRQ0 (PIC_G2_GIC_BASE + 59)
-#define IRQ_ARM_CTIRQ1 (PIC_G2_GIC_BASE + 60)
-#define IRQ_USB_DEV (PIC_G2_GIC_BASE + 61)
-#define IRQ_USB_EHCI (PIC_G2_GIC_BASE + 62)
-#define IRQ_USB_OHCI (PIC_G2_GIC_BASE + 63)
-#define IRQ_AHCI_CTRL (PIC_G2_GIC_BASE + 64)
-#define IRQ_PCIE0 (PIC_G2_GIC_BASE + 65)
-#define IRQ_PCIE1 (PIC_G2_GIC_BASE + 66)
-#define IRQ_PCIE2 (PIC_G2_GIC_BASE + 67)
-#define IRQ_LCD (PIC_G2_GIC_BASE + 68)
-#define IRQ_NI_RX_XRAM0 (PIC_G2_GIC_BASE + 69)
-#define IRQ_NI_RX_XRAM1 (PIC_G2_GIC_BASE + 70)
-#define IRQ_NI_RX_XRAM2 (PIC_G2_GIC_BASE + 71)
-#define IRQ_NI_RX_XRAM3 (PIC_G2_GIC_BASE + 72)
-#define IRQ_NI_RX_XRAM4 (PIC_G2_GIC_BASE + 73)
-#define IRQ_NI_RX_XRAM5 (PIC_G2_GIC_BASE + 74)
-#define IRQ_NI_RX_XRAM6 (PIC_G2_GIC_BASE + 75)
-#define IRQ_NI_RX_XRAM7 (PIC_G2_GIC_BASE + 76)
-#define IRQ_NI_RX_XRAM8 (PIC_G2_GIC_BASE + 77)
-#define IRQ_SPDIF (PIC_G2_GIC_BASE + 78)
-
-#define IRQ_REGBUS_SOFT0 (PIC_G2_REGBUS_BASE + 0)
-#define IRQ_REGBUS_SOFT1 (PIC_G2_REGBUS_BASE + 1)
-#define IRQ_REGBUS_TIMER0 (PIC_G2_REGBUS_BASE + 2)
-#define IRQ_REGBUS_TIMER1 (PIC_G2_REGBUS_BASE + 3)
-#define IRQ_REGBUS_AXII (PIC_G2_REGBUS_BASE + 4)
-#define IRQ_REGBUS_SPI (PIC_G2_REGBUS_BASE + 5)
-#define IRQ_REGBUS_GPIO0 (PIC_G2_REGBUS_BASE + 6)
-#define IRQ_REGBUS_GPIO1 (PIC_G2_REGBUS_BASE + 7)
-#define IRQ_REGBUS_GPIO2 (PIC_G2_REGBUS_BASE + 8)
-#define IRQ_REGBUS_GPIO3 (PIC_G2_REGBUS_BASE + 9)
-#define IRQ_REGBUS_GPIO4 (PIC_G2_REGBUS_BASE + 10)
-#define IRQ_REGBUS_BIWI (PIC_G2_REGBUS_BASE + 11)
-#define IRQ_REGBUS_MDIO (PIC_G2_REGBUS_BASE + 12)
-#define IRQ_REGBUS_DMASSP (PIC_G2_REGBUS_BASE + 13)
-#define IRQ_REGBUS_TRNG (PIC_G2_REGBUS_BASE + 14)
-
-#define IRQ_DMAENG_DESC (PIC_G2_DMAENG_BASE + 0)
-#define IRQ_DMAENG_RX_0 (PIC_G2_DMAENG_BASE + 1)
-#define IRQ_DMAENG_RX_1 (PIC_G2_DMAENG_BASE + 2)
-#define IRQ_DMAENG_RX_2 (PIC_G2_DMAENG_BASE + 3)
-#define IRQ_DMAENG_RX_3 (PIC_G2_DMAENG_BASE + 4)
-#define IRQ_DMAENG_RX_4 (PIC_G2_DMAENG_BASE + 5)
-#define IRQ_DMAENG_RX_5 (PIC_G2_DMAENG_BASE + 6)
-#define IRQ_DMAENG_RX_6 (PIC_G2_DMAENG_BASE + 7)
-#define IRQ_DMAENG_RX_7 (PIC_G2_DMAENG_BASE + 8)
-#define IRQ_DMAENG_TX_0 (PIC_G2_DMAENG_BASE + 9)
-#define IRQ_DMAENG_TX_1 (PIC_G2_DMAENG_BASE + 10)
-#define IRQ_DMAENG_TX_2 (PIC_G2_DMAENG_BASE + 11)
-#define IRQ_DMAENG_TX_3 (PIC_G2_DMAENG_BASE + 12)
-#define IRQ_DMAENG_TX_4 (PIC_G2_DMAENG_BASE + 13)
-#define IRQ_DMAENG_TX_5 (PIC_G2_DMAENG_BASE + 14)
-#define IRQ_DMAENG_TX_6 (PIC_G2_DMAENG_BASE + 15)
-#define IRQ_DMAENG_TX_7 (PIC_G2_DMAENG_BASE + 16)
-#define IRQ_DMAENG_BMC_0 (PIC_G2_DMAENG_BASE + 17)
-#define IRQ_DMAENG_BMC_1 (PIC_G2_DMAENG_BASE + 18)
-
-#define IRQ_DMASSP_DESC (PIC_G2_DMASSP_BASE + 0)
-#define IRQ_DMASSP_RX_5 (PIC_G2_DMASSP_BASE + 1)
-#define IRQ_DMASSP_RX_6 (PIC_G2_DMASSP_BASE + 2)
-#define IRQ_DMASSP_RX_7 (PIC_G2_DMASSP_BASE + 3)
-#define IRQ_DMASSP_TX_5 (PIC_G2_DMASSP_BASE + 4)
-#define IRQ_DMASSP_TX_6 (PIC_G2_DMASSP_BASE + 5)
-#define IRQ_DMASSP_TX_7 (PIC_G2_DMASSP_BASE + 6)
-#define IRQ_DMASSP_AXI_RX_RD_DESC (PIC_G2_DMASSP_BASE + 7)
-#define IRQ_DMASSP_AXI_TX_RD_DESC (PIC_G2_DMASSP_BASE + 8)
-#define IRQ_DMASSP_AXI_TX_RD_DATA (PIC_G2_DMASSP_BASE + 9)
-#define IRQ_DMASSP_AXI_RX_WR_DESC (PIC_G2_DMASSP_BASE + 10)
-#define IRQ_DMASSP_AXI_RX_WR_DATA (PIC_G2_DMASSP_BASE + 11)
-#define IRQ_DMASSP_AXI_TX_WR_DESC (PIC_G2_DMASSP_BASE + 12)
-#define IRQ_DMASSP_SSP_0 (PIC_G2_DMASSP_BASE + 13)
-#define IRQ_DMASSP_SSP_1 (PIC_G2_DMASSP_BASE + 14)
-
-#endif /* _ARM_CORTINA_G2_INTR_H_ */
diff -r 84ac565bcbc0 -r 7d432feedf18 sys/arch/arm/cortina/g2_reg.h
--- a/sys/arch/arm/cortina/g2_reg.h Thu Sep 13 14:44:09 2018 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,117 +0,0 @@
-/* $NetBSD: g2_reg.h,v 1.1 2013/02/19 16:07:23 matt Exp $ */
-/*-
- * Copyright (c) 2013 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Matt Thomas of 3am Software Foundry.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
Home |
Main Index |
Thread Index |
Old Index