Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/pci If the memory space's BAR and the MSI-X table is...
details: https://anonhg.NetBSD.org/src/rev/f3e4d713daf4
branches: trunk
changeset: 1002467:f3e4d713daf4
user: msaitoh <msaitoh%NetBSD.org@localhost>
date: Thu Aug 01 13:43:28 2019 +0000
description:
If the memory space's BAR and the MSI-X table is on the same BAR,
reserve the space. Almost the same as nvme_pci.c and xhci_pci.c.
Tested by ryoon@.
diffstat:
sys/dev/pci/if_ena.c | 62 +++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 52 insertions(+), 10 deletions(-)
diffs (79 lines):
diff -r 1166b50fca1d -r f3e4d713daf4 sys/dev/pci/if_ena.c
--- a/sys/dev/pci/if_ena.c Thu Aug 01 13:36:37 2019 +0000
+++ b/sys/dev/pci/if_ena.c Thu Aug 01 13:43:28 2019 +0000
@@ -31,7 +31,7 @@
#if 0
__FBSDID("$FreeBSD: head/sys/dev/ena/ena.c 333456 2018-05-10 09:37:54Z mw $");
#endif
-__KERNEL_RCSID(0, "$NetBSD: if_ena.c,v 1.15 2019/05/29 10:07:29 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_ena.c,v 1.16 2019/08/01 13:43:28 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -273,15 +273,57 @@
ena_allocate_pci_resources(struct pci_attach_args *pa,
struct ena_adapter *adapter)
{
- bus_size_t size;
-
- /*
- * Map control/status registers.
- */
- pcireg_t memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, ENA_REG_BAR);
- if (pci_mapreg_map(pa, ENA_REG_BAR, memtype, 0, &adapter->sc_btag,
- &adapter->sc_bhandle, NULL, &size)) {
- aprint_error(": can't map mem space\n");
+ pcireg_t memtype, reg;
+ bus_addr_t memaddr;
+ bus_size_t mapsize;
+ int flags, error;
+ int msixoff;
+
+ memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, ENA_REG_BAR);
+ if (PCI_MAPREG_TYPE(memtype) != PCI_MAPREG_TYPE_MEM) {
+ aprint_error_dev(adapter->pdev, "invalid type (type=0x%x)\n",
+ memtype);
+ return ENXIO;
+ }
+ reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
+ if (((reg & PCI_COMMAND_MASTER_ENABLE) == 0) ||
+ ((reg & PCI_COMMAND_MEM_ENABLE) == 0)) {
+ /*
+ * Enable address decoding for memory range in case BIOS or
+ * UEFI didn't set it.
+ */
+ reg |= PCI_COMMAND_MASTER_ENABLE | PCI_COMMAND_MEM_ENABLE;
+ pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
+ reg);
+ }
+
+ adapter->sc_btag = pa->pa_memt;
+ error = pci_mapreg_info(pa->pa_pc, pa->pa_tag, ENA_REG_BAR,
+ memtype, &memaddr, &mapsize, &flags);
+ if (error) {
+ aprint_error_dev(adapter->pdev, "can't get map info\n");
+ return ENXIO;
+ }
+
+ if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_MSIX, &msixoff,
+ NULL)) {
+ pcireg_t msixtbl;
+ uint32_t table_offset;
+ int bir;
+
+ msixtbl = pci_conf_read(pa->pa_pc, pa->pa_tag,
+ msixoff + PCI_MSIX_TBLOFFSET);
+ table_offset = msixtbl & PCI_MSIX_TBLOFFSET_MASK;
+ bir = msixtbl & PCI_MSIX_PBABIR_MASK;
+ if (bir == PCI_MAPREG_NUM(ENA_REG_BAR))
+ mapsize = table_offset;
+ }
+
+ error = bus_space_map(adapter->sc_btag, memaddr, mapsize, flags,
+ &adapter->sc_bhandle);
+ if (error != 0) {
+ aprint_error_dev(adapter->pdev,
+ "can't map mem space (error=%d)\n", error);
return ENXIO;
}
Home |
Main Index |
Thread Index |
Old Index