Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src-draft/trunk]: src/sys/dev/pci Revert rev 1.87 for now: iwm(4): Disentang...
details: https://anonhg.NetBSD.org/src-all/rev/d9c44cf0437c
branches: trunk
changeset: 367281:d9c44cf0437c
user: Martin Husemann <martin%NetBSD.org@localhost>
date: Wed Sep 15 19:46:37 2021 +0200
description:
Revert rev 1.87 for now: iwm(4): Disentangle attach.
diffstat:
sys/dev/pci/if_iwm.c | 183 ++++++++++++++++++++++++++++----------------------
1 files changed, 101 insertions(+), 82 deletions(-)
diffs (280 lines):
diff -r 1e18d6d643b2 -r d9c44cf0437c sys/dev/pci/if_iwm.c
--- a/sys/dev/pci/if_iwm.c Tue Sep 14 19:09:11 2021 +0200
+++ b/sys/dev/pci/if_iwm.c Wed Sep 15 19:46:37 2021 +0200
@@ -482,7 +482,6 @@
static int iwm_preinit(struct iwm_softc *);
static void iwm_attach_hook(device_t);
static void iwm_attach(device_t, device_t, void *);
-static int iwm_config_complete(struct iwm_softc *);
#if 0
static void iwm_init_task(void *);
static int iwm_activate(device_t, enum devact);
@@ -6599,6 +6598,10 @@
struct ieee80211com *ic = &sc->sc_ic;
int err, i, ac;
+ err = iwm_preinit(sc);
+ if (err)
+ return err;
+
err = iwm_start_hw(sc);
if (err) {
aprint_error_dev(sc->sc_dev, "could not initialize hardware\n");
@@ -6948,6 +6951,10 @@
case SIOCADDMULTI:
case SIOCDELMULTI:
+ if (!ISSET(sc->sc_flags, IWM_FLAG_ATTACHED)) {
+ err = ENXIO;
+ break;
+ }
sa = ifreq_getaddr(SIOCADDMULTI, (struct ifreq *)data);
err = (cmd == SIOCADDMULTI) ?
ether_addmulti(sa, &sc->sc_ec) :
@@ -6957,6 +6964,10 @@
break;
default:
+ if (!ISSET(sc->sc_flags, IWM_FLAG_ATTACHED)) {
+ err = ether_ioctl(ifp, cmd, data);
+ break;
+ }
err = ieee80211_ioctl(ic, cmd, data);
break;
}
@@ -7717,8 +7728,13 @@
static int
iwm_preinit(struct iwm_softc *sc)
{
+ struct ieee80211com *ic = &sc->sc_ic;
+ struct ifnet *ifp = IC2IFP(&sc->sc_ic);
int err;
+ if (ISSET(sc->sc_flags, IWM_FLAG_ATTACHED))
+ return 0;
+
err = iwm_start_hw(sc);
if (err) {
aprint_error_dev(sc->sc_dev, "could not initialize hardware\n");
@@ -7730,10 +7746,44 @@
if (err)
return err;
+ sc->sc_flags |= IWM_FLAG_ATTACHED;
+
aprint_normal_dev(sc->sc_dev, "hw rev 0x%x, fw ver %s, address %s\n",
sc->sc_hw_rev & IWM_CSR_HW_REV_TYPE_MSK, sc->sc_fwver,
ether_sprintf(sc->sc_nvm.hw_addr));
+#ifndef IEEE80211_NO_HT
+ if (sc->sc_nvm.sku_cap_11n_enable)
+ iwm_setup_ht_rates(sc);
+#endif
+
+ /* not all hardware can do 5GHz band */
+ if (sc->sc_nvm.sku_cap_band_52GHz_enable)
+ ic->ic_sup_rates[IEEE80211_MODE_11A] = ieee80211_std_rateset_11a;
+
+ ether_ifdetach(ifp);
+ /*
+ * XXX
+ * ether_ifdetach() overwrites ifp->if_ioctl, so restore it here.
+ */
+ ifp->if_ioctl = iwm_ioctl;
+ ieee80211_ifattach(ic);
+
+ ic->ic_node_alloc = iwm_node_alloc;
+
+ /* Override 802.11 state transition machine. */
+ sc->sc_newstate = ic->ic_newstate;
+ ic->ic_newstate = iwm_newstate;
+
+ /* XXX media locking needs revisiting */
+ mutex_init(&sc->sc_media_mtx, MUTEX_DEFAULT, IPL_SOFTNET);
+ ieee80211_media_init_with_lock(ic,
+ iwm_media_change, ieee80211_media_status, &sc->sc_media_mtx);
+
+ ieee80211_announce(ic);
+
+ iwm_radiotap_attach(sc);
+
return 0;
}
@@ -7742,7 +7792,7 @@
{
struct iwm_softc *sc = device_private(dev);
- iwm_config_complete(sc);
+ iwm_preinit(sc);
}
static void
@@ -7750,6 +7800,8 @@
{
struct iwm_softc *sc = device_private(self);
struct pci_attach_args *pa = aux;
+ struct ieee80211com *ic = &sc->sc_ic;
+ struct ifnet *ifp = &sc->sc_ec.ec_if;
pcireg_t reg, memtype;
char intrbuf[PCI_INTRSTR_LEN];
const char *intrstr;
@@ -8029,60 +8081,6 @@
}
}
- callout_init(&sc->sc_calib_to, 0);
- callout_setfunc(&sc->sc_calib_to, iwm_calib_timeout, sc);
- callout_init(&sc->sc_led_blink_to, 0);
- callout_setfunc(&sc->sc_led_blink_to, iwm_led_blink_timeout, sc);
-#ifndef IEEE80211_NO_HT
- if (workqueue_create(&sc->sc_setratewq, "iwmsr",
- iwm_setrates_task, sc, PRI_NONE, IPL_NET, 0))
- panic("%s: could not create workqueue: setrates",
- device_xname(self));
- if (workqueue_create(&sc->sc_bawq, "iwmba",
- iwm_ba_task, sc, PRI_NONE, IPL_NET, 0))
- panic("%s: could not create workqueue: blockack",
- device_xname(self));
- if (workqueue_create(&sc->sc_htprowq, "iwmhtpro",
- iwm_htprot_task, sc, PRI_NONE, IPL_NET, 0))
- panic("%s: could not create workqueue: htprot",
- device_xname(self));
-#endif
-
- /*
- * We can't do normal attach before the file system is mounted
- * because we cannot read the MAC address without loading the
- * firmware from disk. So we postpone until mountroot is done.
- * Notably, this will require a full driver unload/load cycle
- * (or reboot) in case the firmware is not present when the
- * hook runs.
- */
- config_mountroot(self, iwm_attach_hook);
-
- return;
-
-fail5: while (--txq_i >= 0)
- iwm_free_tx_ring(sc, &sc->txq[txq_i]);
-fail4: iwm_dma_contig_free(&sc->sched_dma);
-fail3: if (sc->ict_dma.vaddr != NULL)
- iwm_dma_contig_free(&sc->ict_dma);
-fail2: iwm_dma_contig_free(&sc->kw_dma);
-fail1: iwm_dma_contig_free(&sc->fw_dma);
-}
-
-static int
-iwm_config_complete(struct iwm_softc *sc)
-{
- device_t self = sc->sc_dev;
- struct ieee80211com *ic = &sc->sc_ic;
- struct ifnet *ifp = &sc->sc_ec.ec_if;
- int err;
-
- KASSERT(!ISSET(sc->sc_flags, IWM_FLAG_ATTACHED));
-
- err = iwm_preinit(sc);
- if (err)
- return err;
-
/*
* Attach interface
*/
@@ -8114,15 +8112,6 @@
ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;
- /* not all hardware can do 5GHz band */
- if (sc->sc_nvm.sku_cap_band_52GHz_enable)
- ic->ic_sup_rates[IEEE80211_MODE_11A] = ieee80211_std_rateset_11a;
-
-#ifndef IEEE80211_NO_HT
- if (sc->sc_nvm.sku_cap_11n_enable)
- iwm_setup_ht_rates(sc);
-#endif
-
for (int i = 0; i < __arraycount(sc->sc_phyctxt); i++) {
sc->sc_phyctxt[i].id = i;
}
@@ -8148,34 +8137,64 @@
memcpy(ifp->if_xname, DEVNAME(sc), IFNAMSIZ);
if_initialize(ifp);
+#if 0
ieee80211_ifattach(ic);
+#else
+ /*
+ * XXX
+ * To avoid setting ifp->if_hwdl in if_set_sadl(), we fake
+ * ic->ic_myaddr as local address.
+ */
+ ic->ic_myaddr[0] = 0x02;
+ ether_ifattach(ifp, ic->ic_myaddr); /* XXX */
+#endif
/* Use common softint-based if_input */
ifp->if_percpuq = if_percpuq_create(ifp);
if_register(ifp);
- ic->ic_node_alloc = iwm_node_alloc;
-
- /* Override 802.11 state transition machine. */
- sc->sc_newstate = ic->ic_newstate;
- ic->ic_newstate = iwm_newstate;
-
- /* XXX media locking needs revisiting */
- mutex_init(&sc->sc_media_mtx, MUTEX_DEFAULT, IPL_SOFTNET);
- ieee80211_media_init_with_lock(ic,
- iwm_media_change, ieee80211_media_status, &sc->sc_media_mtx);
-
- ieee80211_announce(ic);
-
- iwm_radiotap_attach(sc);
+ callout_init(&sc->sc_calib_to, 0);
+ callout_setfunc(&sc->sc_calib_to, iwm_calib_timeout, sc);
+ callout_init(&sc->sc_led_blink_to, 0);
+ callout_setfunc(&sc->sc_led_blink_to, iwm_led_blink_timeout, sc);
+#ifndef IEEE80211_NO_HT
+ if (workqueue_create(&sc->sc_setratewq, "iwmsr",
+ iwm_setrates_task, sc, PRI_NONE, IPL_NET, 0))
+ panic("%s: could not create workqueue: setrates",
+ device_xname(self));
+ if (workqueue_create(&sc->sc_bawq, "iwmba",
+ iwm_ba_task, sc, PRI_NONE, IPL_NET, 0))
+ panic("%s: could not create workqueue: blockack",
+ device_xname(self));
+ if (workqueue_create(&sc->sc_htprowq, "iwmhtpro",
+ iwm_htprot_task, sc, PRI_NONE, IPL_NET, 0))
+ panic("%s: could not create workqueue: htprot",
+ device_xname(self));
+#endif
if (pmf_device_register(self, NULL, NULL))
pmf_class_network_register(self, ifp);
else
aprint_error_dev(self, "couldn't establish power handler\n");
- sc->sc_flags |= IWM_FLAG_ATTACHED;
-
- return 0;
+ /*
+ * We can't do normal attach before the file system is mounted
+ * because we cannot read the MAC address without loading the
+ * firmware from disk. So we postpone until mountroot is done.
+ * Notably, this will require a full driver unload/load cycle
+ * (or reboot) in case the firmware is not present when the
+ * hook runs.
+ */
+ config_mountroot(self, iwm_attach_hook);
+
+ return;
+
+fail5: while (--txq_i >= 0)
+ iwm_free_tx_ring(sc, &sc->txq[txq_i]);
+fail4: iwm_dma_contig_free(&sc->sched_dma);
+fail3: if (sc->ict_dma.vaddr != NULL)
+ iwm_dma_contig_free(&sc->ict_dma);
+fail2: iwm_dma_contig_free(&sc->kw_dma);
+fail1: iwm_dma_contig_free(&sc->fw_dma);
}
void
Home |
Main Index |
Thread Index |
Old Index