NetBSD master CVS tree commits

[The Source of All Evil <source>]

jonathan
Mon Feb 26 23:20:36 EST 1996
Update of /a/cvsroot/src/sys/sys
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv4981/sys

Modified Files:
        syscall.h syscallargs.h sysctl.h timex.h 
Log Message:
Add NTP kernel precision timekeeping from Dave Mill's xntp distribution
and the "kernel.tar.Z" distribution on louie.udel.edu, which is older than
xntp 3.4y or 3.5a, but contains newer kernel source fragments.

This commit adds support for a new kernel configuration option, NTP.
If NTP is selected, then the system clock should be run at "HZ", which
must be defined at compile time to be one value from:
  60, 64, 100, 128, 256, 512, 1024.

Powers of 2 are ideal; 60 and 100 are supported but are marginally less
accurate.

If NTP is not configured, there should be no change in behavior relative
to pre-NTP kernels.

These changes have been tested extensively with xntpd 3.4y on a decstation;
almost identical kernel mods work on an i386.  No pulse-per-second (PPS)
line discipline support is included, due to unavailability of hardware
to test it.

With this in-kernel PLL support for NetBSD, both xntp 3.4y and xntp
3.5a user-level code need minor changes. xntp's prototype for
syscall() is  correct for FreeBSD, but not for NetBSD.


jonathan
Mon Feb 26 23:20:43 EST 1996
Update of /a/cvsroot/src/sys/kern
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv4981/kern

Modified Files:
        kern_clock.c kern_sysctl.c syscalls.master 
Added Files:
        kern_ntptime.c 
Log Message:
Add NTP kernel precision timekeeping from Dave Mill's xntp distribution
and the "kernel.tar.Z" distribution on louie.udel.edu, which is older than
xntp 3.4y or 3.5a, but contains newer kernel source fragments.

This commit adds support for a new kernel configuration option, NTP.
If NTP is selected, then the system clock should be run at "HZ", which
must be defined at compile time to be one value from:
  60, 64, 100, 128, 256, 512, 1024.

Powers of 2 are ideal; 60 and 100 are supported but are marginally less
accurate.

If NTP is not configured, there should be no change in behavior relative
to pre-NTP kernels.

These changes have been tested extensively with xntpd 3.4y on a decstation;
almost identical kernel mods work on an i386.  No pulse-per-second (PPS)
line discipline support is included, due to unavailability of hardware
to test it.

With this in-kernel PLL support for NetBSD, both xntp 3.4y and xntp
3.5a user-level code need minor changes. xntp's prototype for
syscall() is  correct for FreeBSD, but not for NetBSD.


jonathan
Mon Feb 26 23:20:45 EST 1996
Update of /a/cvsroot/src/sys/conf
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv4981/conf

Modified Files:
        files 
Log Message:
Add NTP kernel precision timekeeping from Dave Mill's xntp distribution
and the "kernel.tar.Z" distribution on louie.udel.edu, which is older than
xntp 3.4y or 3.5a, but contains newer kernel source fragments.

This commit adds support for a new kernel configuration option, NTP.
If NTP is selected, then the system clock should be run at "HZ", which
must be defined at compile time to be one value from:
  60, 64, 100, 128, 256, 512, 1024.

Powers of 2 are ideal; 60 and 100 are supported but are marginally less
accurate.

If NTP is not configured, there should be no change in behavior relative
to pre-NTP kernels.

These changes have been tested extensively with xntpd 3.4y on a decstation;
almost identical kernel mods work on an i386.  No pulse-per-second (PPS)
line discipline support is included, due to unavailability of hardware
to test it.

With this in-kernel PLL support for NetBSD, both xntp 3.4y and xntp
3.5a user-level code need minor changes. xntp's prototype for
syscall() is  correct for FreeBSD, but not for NetBSD.