NetBSD master CVS tree commits

[source%NetBSD.ORG@localhost]

gibbs
Mon Oct  7 20:04:06 PDT 1996
Update of /cvsroot/src/sys/dev/ic
In directory netbsd1:/var/slash-tmp/cvs-serv25507/dev/ic

Modified Files:
        aic7xxx.c aic7xxxreg.h aic7xxxvar.h 
Log Message:
dev/microcode/aic7xxx/aic7xxx.seq,
dev/microcode/aic7xxx_seq.h,
dev/ic/aic7xxxreg.h:
  Remove intrinsic knowledge about SDTR and WDTR messages and replace it 
  with a generic message system that allows the kernel driver to handle
  SDTR, WDTR and any other type of extended message it chooses too.  This
  makes the sequencer code much simpler, makes extended message handling
  debuggable since the bulk of the work is in the kernel driver, and saves
  lots of instruction space.

  Regen microcode header file.

dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h:
  Add code to handle WDTR and SDTR negotiation in light of the changes in
  the message interface to the sequencer.  Don't reject targets that
  negotiate async by sending an SDTR with a 0 offset.  Use an sdtr message
  with 0,0 to negotiate async when a target suggests a period that is too
  long for us to handle.  Some tape and cdrom drives don't like us doing
  the message reject that we did in the past.

  Fix a problem with handing the QUEUE FULL condition.

  Fix a race condition (most likely the cause of the SCB paging problems) that
  might allow the sequencer to get unpaused before the condition that caused
  it to be paused (a SEQINT) was handled.

  Race condition pointed out by Doug Ledford <dledford%dialnet.net@localhost> 
and
  by "Dan Willis" <dan%plutotech.com@localhost>.

dev/pci/ahc_pci.c:
  Add support for the 2940AU, an aic7860 based controller.

dev/pci/pcidevs.h, dev/pci/pcidevs_data.h:
  Add product IDs for the 2940AU, aic7860 and aic7855.

  Regen data file.

scsi/scsi_message.h: 
  Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these
  extended messages.

Thanks to Chuck Cranor <chuck%maria.wustl.edu@localhost> for testing these 
changes
out for me.


gibbs
Mon Oct  7 20:04:08 PDT 1996
Update of /cvsroot/src/sys/dev/microcode/aic7xxx
In directory netbsd1:/var/slash-tmp/cvs-serv25507/dev/microcode/aic7xxx

Modified Files:
        aic7xxx.seq aic7xxx_seq.h 
Log Message:
dev/microcode/aic7xxx/aic7xxx.seq,
dev/microcode/aic7xxx_seq.h,
dev/ic/aic7xxxreg.h:
  Remove intrinsic knowledge about SDTR and WDTR messages and replace it 
  with a generic message system that allows the kernel driver to handle
  SDTR, WDTR and any other type of extended message it chooses too.  This
  makes the sequencer code much simpler, makes extended message handling
  debuggable since the bulk of the work is in the kernel driver, and saves
  lots of instruction space.

  Regen microcode header file.

dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h:
  Add code to handle WDTR and SDTR negotiation in light of the changes in
  the message interface to the sequencer.  Don't reject targets that
  negotiate async by sending an SDTR with a 0 offset.  Use an sdtr message
  with 0,0 to negotiate async when a target suggests a period that is too
  long for us to handle.  Some tape and cdrom drives don't like us doing
  the message reject that we did in the past.

  Fix a problem with handing the QUEUE FULL condition.

  Fix a race condition (most likely the cause of the SCB paging problems) that
  might allow the sequencer to get unpaused before the condition that caused
  it to be paused (a SEQINT) was handled.

  Race condition pointed out by Doug Ledford <dledford%dialnet.net@localhost> 
and
  by "Dan Willis" <dan%plutotech.com@localhost>.

dev/pci/ahc_pci.c:
  Add support for the 2940AU, an aic7860 based controller.

dev/pci/pcidevs.h, dev/pci/pcidevs_data.h:
  Add product IDs for the 2940AU, aic7860 and aic7855.

  Regen data file.

scsi/scsi_message.h: 
  Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these
  extended messages.

Thanks to Chuck Cranor <chuck%maria.wustl.edu@localhost> for testing these 
changes
out for me.


gibbs
Mon Oct  7 20:04:12 PDT 1996
Update of /cvsroot/src/sys/dev/pci
In directory netbsd1:/var/slash-tmp/cvs-serv25507/dev/pci

Modified Files:
        ahc_pci.c pcidevs pcidevs.h pcidevs_data.h 
Log Message:
dev/microcode/aic7xxx/aic7xxx.seq,
dev/microcode/aic7xxx_seq.h,
dev/ic/aic7xxxreg.h:
  Remove intrinsic knowledge about SDTR and WDTR messages and replace it 
  with a generic message system that allows the kernel driver to handle
  SDTR, WDTR and any other type of extended message it chooses too.  This
  makes the sequencer code much simpler, makes extended message handling
  debuggable since the bulk of the work is in the kernel driver, and saves
  lots of instruction space.

  Regen microcode header file.

dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h:
  Add code to handle WDTR and SDTR negotiation in light of the changes in
  the message interface to the sequencer.  Don't reject targets that
  negotiate async by sending an SDTR with a 0 offset.  Use an sdtr message
  with 0,0 to negotiate async when a target suggests a period that is too
  long for us to handle.  Some tape and cdrom drives don't like us doing
  the message reject that we did in the past.

  Fix a problem with handing the QUEUE FULL condition.

  Fix a race condition (most likely the cause of the SCB paging problems) that
  might allow the sequencer to get unpaused before the condition that caused
  it to be paused (a SEQINT) was handled.

  Race condition pointed out by Doug Ledford <dledford%dialnet.net@localhost> 
and
  by "Dan Willis" <dan%plutotech.com@localhost>.

dev/pci/ahc_pci.c:
  Add support for the 2940AU, an aic7860 based controller.

dev/pci/pcidevs.h, dev/pci/pcidevs_data.h:
  Add product IDs for the 2940AU, aic7860 and aic7855.

  Regen data file.

scsi/scsi_message.h: 
  Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these
  extended messages.

Thanks to Chuck Cranor <chuck%maria.wustl.edu@localhost> for testing these 
changes
out for me.


gibbs
Mon Oct  7 20:04:13 PDT 1996
Update of /cvsroot/src/sys/scsi
In directory netbsd1:/var/slash-tmp/cvs-serv25507/scsi

Modified Files:
        scsi_message.h 
Log Message:
dev/microcode/aic7xxx/aic7xxx.seq,
dev/microcode/aic7xxx_seq.h,
dev/ic/aic7xxxreg.h:
  Remove intrinsic knowledge about SDTR and WDTR messages and replace it 
  with a generic message system that allows the kernel driver to handle
  SDTR, WDTR and any other type of extended message it chooses too.  This
  makes the sequencer code much simpler, makes extended message handling
  debuggable since the bulk of the work is in the kernel driver, and saves
  lots of instruction space.

  Regen microcode header file.

dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h:
  Add code to handle WDTR and SDTR negotiation in light of the changes in
  the message interface to the sequencer.  Don't reject targets that
  negotiate async by sending an SDTR with a 0 offset.  Use an sdtr message
  with 0,0 to negotiate async when a target suggests a period that is too
  long for us to handle.  Some tape and cdrom drives don't like us doing
  the message reject that we did in the past.

  Fix a problem with handing the QUEUE FULL condition.

  Fix a race condition (most likely the cause of the SCB paging problems) that
  might allow the sequencer to get unpaused before the condition that caused
  it to be paused (a SEQINT) was handled.

  Race condition pointed out by Doug Ledford <dledford%dialnet.net@localhost> 
and
  by "Dan Willis" <dan%plutotech.com@localhost>.

dev/pci/ahc_pci.c:
  Add support for the 2940AU, an aic7860 based controller.

dev/pci/pcidevs.h, dev/pci/pcidevs_data.h:
  Add product IDs for the 2940AU, aic7860 and aic7855.

  Regen data file.

scsi/scsi_message.h: 
  Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these
  extended messages.

Thanks to Chuck Cranor <chuck%maria.wustl.edu@localhost> for testing these 
changes
out for me.