CVS commit: [netbsd-5] src/sys/dev

[Soren Jacobsen <snj%netbsd.org@localhost>]

Module Name:    src
Committed By:   snj
Date:           Fri Jun 19 21:51:44 UTC 2009

Modified Files:
        src/sys/dev/ic [netbsd-5]: rtl8169.c rtl81x9reg.h rtl81x9var.h
        src/sys/dev/mii [netbsd-5]: rgephy.c
        src/sys/dev/pci [netbsd-5]: if_re_pci.c

Log Message:
Pull up following revision(s) (requested by tsutsui in ticket #821):
        sys/dev/ic/rtl8169.c: revisions 1.107, 1.114-1.119, 1.121
        sys/dev/ic/rtl81x9reg.h: revisions 1.36-1.39
        sys/dev/ic/rtl81x9var.h: revision 1.47
        sys/dev/mii/rgephy.c: revision 1.27 via patch
        sys/dev/pci/if_re_pci.c: revision 1.36
remove extra semicolons.
--
Add HWREV values of RTL8168CP and RTL8168D.  From FreeBSD.

XXX: needs more quirk handling after wakeup for newer chips.
--
Add HWREV of RTL8102EL variant.  From FUKAUMI Naoki.
--
Assume an unknown HWREV chip has the same features with the latest one.
--
Remove suffix "B" from rtk_name of PCI_PRODUCT_REALTEK_RT8168 devices.
All 8168/8111 variants (8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP)
have the same PCI device ID.
--
Remove magic reset sequence except wakeup for rev 2 chips which breaks 8111D.
Problem reported and fix confirmed by Thomas Bieg on current-users.

Also tested on 8111C (no bad side effect) by several users privately.
--
Pull some changes for newer chips from FreeBSD:
- pull MACSTAT and CMDSTOP quirks for 8168/8111 chips
- always set CPLUSCMD_PCI_MRW on reset
- set VLANSTRIP and RXCSUM_ENB bits on CPLUS register per if_capenable

Tested on 8111C and 8111D by several users, and
no bad side effect on my old 8169S.
--
Remove unused sc_rev settings (all quirks are handled by sc_quirk)
and merge HWREV cases which have the same quirks.
--
- rename RTK_HWREV_8102EL_SPIN2 -> RTK_HWREV_8103E
- add a HWREV value for 8168DP
Per Realtek's Linux drivers.
--
Two fixes for RX hwcsum on DESCV2 chips:
 * On checking TCPv4/UDPv4 RX checksum on DESCV2 chips, also check
   RE_RDESC_VLANCTL_IPV4 bit because those DESCV2 chips may also recognize
   IPv6 packets and set RE_PROTOID_TCPIP or RE_PROTOID_UDPIP bits for
   TCPv6/UDPv6 packets.  This may fix PR kern/40605.
 * According to Realtek's Linux driver, DESCV2 chips don't set RE_PROTOID_IP
   for non-TCP/UDP IP packets (set only RE_RDESC_VLANCTL_IPV[46]) so
   remove PROTOID check for IPv4 RX cheksum on DESCV2 chips.


To generate a diff of this commit:
cvs rdiff -u -r1.105.4.7 -r1.105.4.8 src/sys/dev/ic/rtl8169.c
cvs rdiff -u -r1.32.4.3 -r1.32.4.4 src/sys/dev/ic/rtl81x9reg.h
cvs rdiff -u -r1.41.12.4 -r1.41.12.5 src/sys/dev/ic/rtl81x9var.h
cvs rdiff -u -r1.21 -r1.21.10.1 src/sys/dev/mii/rgephy.c
cvs rdiff -u -r1.35 -r1.35.4.1 src/sys/dev/pci/if_re_pci.c

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.