CVS commit: [netbsd-8] src/sys/dev

["Martin Husemann" <martin%netbsd.org@localhost>]

Module Name:    src
Committed By:   martin
Date:           Wed Aug  5 17:22:46 UTC 2020

Modified Files:
        src/sys/dev/mii [netbsd-8]: igphy.c igphyreg.h makphy.c makphyreg.h
        src/sys/dev/pci [netbsd-8]: if_wm.c if_wmreg.h if_wmvar.h

Log Message:
Pull up the following revisions, requested by msaitoh in ticket #1594:

        sys/dev/pci/if_wm.c                     1.655-1.658, 1.660,
                                                1.662, 1.664-1.668,
                                                1.671-1.674, 1.678,
                                                1.680-1.685 via patch
        sys/dev/pci/if_wmreg.c                  1.118-1.119 via patch
        sys/dev/pci/if_wmvar.c                  1.45 via patch
        sys/dev/mii/igphy.c                     1.35-1.36 via patch
        sys/dev/mii/igphyreg.h                  1.12-1.13
        sys/dev/mii/makphy.c                    1.66 via patch
        sys/dev/mii/makphyreg.h                 1.11

- Add SFP support. Module insertion/removal is not supported yet.
  Currently, SFP detection is only done in the driver's attach phase.
- Detect the Media Auto Sense feature. Not supported yet.
- Fix SFF_SFP_ETH_FLAGS_100FX. It's not 0x10 but 0x20.
- Add extra delay in wm_serdes_power_up_link_82575().
- Add Intel I219 LM10-LM15 and V10-V14.
- wm(4) can use workqueue as deferred Rx/Tx handler).
  Set hw.wm*.txrx_workqueue=1 to use workqueue instead of softint.
  The default value of hw.wm*.txrx_workqueue is 0 which use softint
  as before.
- Unset RSS UDP flags like ixg(4) and other OSes. To handle IP
  fragmented UDP, first packet and second packet should be processed
  in the same Rx queue.
- It's useless to not to set PCI_PMCSR_PME_STS bit when writing because
  the bit is W1C. Instead, always write PCI_PMCSR_PME_STS bit to clear
  in case it's already set.
- Actually writing always the checksum offload context descriptor
  makes the HW do extra processing, avoid doing that if possible.
- Fix a bug that the WMREG_EEARBC_I210 register is incorrectly set if
  the system uses iNVM.
- "wmX: 0" on 82542 is difficult to understand, so don't print it.
- Explicitly cast from uint16_t to uint32_t before shifting 16bit left
  when printing Image Unique ID to avoid undefined behavior.
- Set if_baudrate for non-MII device.
- Rename some macros and function.
- KNF. Add comment.


To generate a diff of this commit:
cvs rdiff -u -r1.26.10.1 -r1.26.10.2 src/sys/dev/mii/igphy.c
cvs rdiff -u -r1.10 -r1.10.8.1 src/sys/dev/mii/igphyreg.h
cvs rdiff -u -r1.42.8.4 -r1.42.8.5 src/sys/dev/mii/makphy.c
cvs rdiff -u -r1.6.20.2 -r1.6.20.3 src/sys/dev/mii/makphyreg.h
cvs rdiff -u -r1.508.4.38 -r1.508.4.39 src/sys/dev/pci/if_wm.c
cvs rdiff -u -r1.98.6.11 -r1.98.6.12 src/sys/dev/pci/if_wmreg.h
cvs rdiff -u -r1.33.6.5 -r1.33.6.6 src/sys/dev/pci/if_wmvar.h

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.