Marcin Jessa wrote:

> Hi guys.
> 
> I created Raid 1 with RaidFrame on two SATA drives by first installing NetBSD on one of them, 
> creating raid on the other with fake device, booting off the second drive, syncing both the drives
> and again installing MBR on the first drive - wd0 following this HowTo:
> http://users.piuha.net/martti/comp/raid/raid.html
> Now the MBR says at boot:
> Boot failed (errno 2): Can't open /boot.
> 
> Any idea what may be wrong and how to fix it ?

Make sure you have a /boot in your root filesystem.  If you
"mount /dev/raid0a /mnt", do you see a /mnt/boot ?  If not,
copy the one from /usr/mdec or /mnt/usr/mdec to /mnt.

Simon.
--
Simon Burge                            <simonb@wasabisystems.com>
NetBSD Support and Service:         http://www.wasabisystems.com/