tech-misc archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Regarding USB port reset in NetBSD
Sorry Martin!
Kindly look up the attached putty log.
First time booted up with power on, next times booted by reboot
command, bit lengthy log...
Thanks,
Gnana
On Mon, Dec 27, 2010 at 4:43 PM, Martin Husemann <martin%duskware.de@localhost>
wrote:
> On Mon, Dec 27, 2010 at 12:06:13PM +0530, Gnanasekar Loganathan wrote:
>> Kindly advice how to solve the scenario one...
>
> Hard to do as you give basically zero information about the hardware
> involved. Usefull things to know would be the dmesg output of your
> machine after booting, and in the working case the dmesg output after
> attaching the usb stick.
>
> Martin
>
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.12.27 14:15:27 =~=~=~=~=~=~=~=~=~=~=~=
Status Code Available
Register PPI Notify: 36164812-a023-44e5-bd85-05bf3c7700aa
Notify: PPI Guid: 36164812-a023-44e5-bd85-05bf3c7700aa, Peim notify entry
point: fff87884
PeiDebugSupport.Entry(FFFCDD7C)
CpuPeiBeforeMem.Entry(FFF8BCE9)
NBPEI.Entry(FFF97D51)
NB PEI DMI Init.
NB PEI PCIe Init.
NB PEI Performance/PM Init.
SBPEI.Entry(FFF9410D)
<< createhob smb hob >>
Register PPI Notify: 71a8917b-0891-4e27-8a73-a9b334840393
Register PPI Notify: f894643d-c449-42d1-8ea8-85bdd8c65bde
MEPlatformPEI.Entry(FFF9970E)
ME Platform PEI Init start.
Register PPI Notify: 64c96700-6b4c-480c-a3e1-b8bde8f602b2
ME Platform PEI Init end.
HECIPEI.Entry(FFF9AD6A)
HECI PEI Init start.
HECI PEI Init end.
CsiandMrcInit.Entry(FFF9FA9A)
========== Entering UNCOREINIT ==========
RtidProfile before: 0
Setup variable is valid - QPI BS (BIOS STUFF).
MemCeil : 0xD0000000
Pci Resource Mem32 Range: 0xD0000000 - 0xFBFFFFFF
PciResourceMem64Base: 0x100000000
RB[0] Mem64 Range : 0x100000000 - 0xffffffffff
RB[1] Mem64 Range : 0x0 - 0x0
RtidProfile after: 0
Tohm : 0x0
HighMmioBase : 0x100000000
HighMmioLimit : 0xFFFFFFFFFF
========== Enter CSI RC code ==========
========== Exit CSI RC code ==========
LowGap: 12
Notify: PPI Guid: 71a8917b-0891-4e27-8a73-a9b334840393, Peim notify entry
point: fff9317d
========== Enter MRC code ==========
[00m[37m[40m
MRC rev: 01000000
The DIMM in socket 0 channel 0 slot 1 is not supported
A warning has been logged! Warning Code = 0x7, Minor Warning Code = 0x4, Data =
0x1FF
Socket = 0 Channel = 0 DIMM = 1
A warning has been logged! Warning Code = 0xB, Minor Warning Code = 0x0, Data =
0xFF
Socket = 0 Channel = 0 DIMM = 0
A warning has been logged! Warning Code = 0xA, Minor Warning Code = 0x2, Data =
0x1FF
Socket = 0 Channel = 0 DIMM = 1
MRC is requesting a reset!
========== Exit MRC code ==========
Notify: PPI Guid: 64c96700-6b4c-480c-a3e1-b8bde8f602b2, Peim notify entry
point: fff99590
MemoryInit Completion!!!!
!!!!! Reference Code Requested Reset !!!!!
Status Code Available
Register PPI Notify: 36164812-a023-44e5-bd85-05bf3c7700aa
Notify: PPI Guid: 36164812-a023-44e5-bd85-05bf3c7700aa, Peim notify entry
point: fff87884
PeiDebugSupport.Entry(FFFCDD7C)
CpuPeiBeforeMem.Entry(FFF8BCE9)
NBPEI.Entry(FFF97D51)
NB PEI DMI Init.
NB PEI PCIe Init.
NB PEI Performance/PM Init.
SBPEI.Entry(FFF9410D)
<< createhob smb hob >>
Register PPI Notify: 71a8917b-0891-4e27-8a73-a9b334840393
Register PPI Notify: f894643d-c449-42d1-8ea8-85bdd8c65bde
MEPlatformPEI.Entry(FFF9970E)
ME Platform PEI Init start.
Register PPI Notify: 64c96700-6b4c-480c-a3e1-b8bde8f602b2
ME Platform PEI Init end.
HECIPEI.Entry(FFF9AD6A)
HECI PEI Init start.
HECI PEI Init end.
CsiandMrcInit.Entry(FFF9FA9A)
========== Entering UNCOREINIT ==========
RtidProfile before: 0
Setup variable is valid - QPI BS (BIOS STUFF).
MemCeil : 0xD0000000
Pci Resource Mem32 Range: 0xD0000000 - 0xFBFFFFFF
PciResourceMem64Base: 0x100000000
RB[0] Mem64 Range : 0x100000000 - 0xffffffffff
RB[1] Mem64 Range : 0x0 - 0x0
RtidProfile after: 0
Tohm : 0x0
HighMmioBase : 0x100000000
HighMmioLimit : 0xFFFFFFFFFF
========== Enter CSI RC code ==========
========== Exit CSI RC code ==========
LowGap: 12
Notify: PPI Guid: 71a8917b-0891-4e27-8a73-a9b334840393, Peim notify entry
point: fff9317d
========== Enter MRC code ==========
[00m[37m[40m
MRC rev: 01000000
The DIMM in socket 0 channel 0 slot 1 is not supported
A warning has been logged! Warning Code = 0x7, Minor Warning Code = 0x4, Data =
0x1FF
Socket = 0 Channel = 0 DIMM = 1
A warning has been logged! Warning Code = 0xB, Minor Warning Code = 0x0, Data =
0xFF
Socket = 0 Channel = 0 DIMM = 0
A warning has been logged! Warning Code = 0xA, Minor Warning Code = 0x2, Data =
0x1FF
Socket = 0 Channel = 0 DIMM = 1
Memory behind processor 0 running at DDR3-1066
RDIMM population
Channel Early Config
DDR training
Command/Clock TrainingRead DQ/DQS
Receive Enable
Write Leveling
Write Leveling Fix-up
Write DQ/DQS
Command
Press [1;37;40mESC[0;37;40m in 1 seconds to skip
[1;33;40mstartup.nsh[0;37;40m, any other key to continue.
[10;1H[1;33;40mShell> exit[10;12H[0;37;40m
[2J
[2J[1;37;40m[2JIN Collect AML Info: 0
IN Collect AML Info after PT: 0
[2J[2J_____BBS_TABLE_____
#03: 0 00/1F/02 1 1 2 3F710000 handle: 1e53418 0, PATA: SILICONSYSTEMS INC 2GB
Handle=1e53418, HandleProtocol status: EFI_SUCCESS, DevicePath: 1e53618
#17: 1 00/19/00 2 0 6 3F710000 handle: 0 0, IBA GE Slot 00C8 v1335
>> NetBSD/x86 BIOS Boot, Revision 5.2 (from NetBSD 5.0.2)
>> Memory: 635/1031648 k
1. Boot normally netbsd.ok
2. Boot normally
3. Boot single user
4. Disable ACPI
5. Disable ACPI and SMP
6. Drop to boot prompt
Choose an option; RETURN for default; SPACE to stop countdown.
Option 1 will be chosen in 5 4 0
type "?" or "help" for help.
> boot netbsd.gnana
booting hd0a:netbsd.gnana
|/-\|/-17398480\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+12602604-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+2162728\|
[873504/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+1130166|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/]=0x2097390
kernel text is mapped with 4 large pages and 409 normal pages
Loaded initial symtab at 0xc1fadd14, strtab at 0xc20834d8, # entries 54575
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0_STABLE (PHOENIX) #6: Tue Dec 21 14:46:08 IST 2010
lgnanasekar@saraswati:/work/sw/lgnanasekar/nv-client/SW-NetBSD5/usr/src/sys/arch/i386/compile/PHOENIX
total memory = 1009 MB
avail memory = 959 MB
sysctl_createv: sysctl_locate(tcpctl_mib2_group) returned 2
sysctl_createv: sysctl_locate(tcpctl_mib2_exaxt_conn_entry) returned 2
sysctl_createv: sysctl_locate(tcpctl_mib2_next_conn_entry) returned 2
sysctl_createv: sysctl_create(ip0) returned 17
sysctl_createv: sysctl_create(ip1) returned 17
sysctl_createv: sysctl_create(ip2) returned 17
To be filled by O.E.M. To be filled by O.E.M. (To be filled by O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1733MHz, id 0x106e4
cpu1 at mainbus0 apid 1: Intel 686-class, 1733MHz, id 0x106e4
ioapic0 at mainbus0 apid 0
ioapic1 at mainbus0 apid 2
acpi0 at mainbus0: Intel ACPICA 20080321
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
com3 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com3: console
com4 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
com4: ns16550a, working fifo
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
nbsd_kbde_match invoked
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x370a (rev. 0x10)
nbsd_kbde_match invoked
ppb0 at pci0 dev 3 function 0: vendor 0x8086 product 0x3721 (rev. 0x10)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
nbsd_kbde_match invoked
nbsd_kbde0 at pci1 dev 0 function 0nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x1
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xb
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47173 and revision 3
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FBE00004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfbe00004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:CCD70000 TAG:0x1 ADDR:FBE00000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xccd70000)
INT REG:0000010b
enter :kbde_dmamem_alloc
BCM Bus Space mem Handle = 0xc1426300
_dma_pbase = 0x3800000
kva=0xccdb0000/0x800000,map=0xc34c5900,nsegs=1,pa=3800000/800000
DMA VBASE:0xccdb0000 DMA PBASE:3800000
nbsd_kbde_match invoked
ppb1 at pci0 dev 4 function 0: vendor 0x8086 product 0x3722 (rev. 0x10)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
nbsd_kbde_match invoked
ppb2 at pci0 dev 5 function 0: vendor 0x8086 product 0x3723 (rev. 0x10)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
nbsd_kbde_match invoked
vendor 0x8086 product 0x10d8 (ethernet network, revision 0x01) at pci3 dev 0
function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x10d8 (ethernet network, revision 0x01) at pci3 dev 0
function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3728 (miscellaneous system, revision 0x10) at pci0 dev
8 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3729 (miscellaneous system, revision 0x10) at pci0 dev
8 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372a (miscellaneous system, revision 0x10) at pci0 dev
8 function 2 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372b (miscellaneous system, revision 0x10) at pci0 dev
8 function 3 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372c (miscellaneous system) at pci0 dev 9 function 0
not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3718 (miscellaneous system, revision 0x10) at pci0 dev
10 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3719 (miscellaneous system, revision 0x10) at pci0 dev
10 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3712 (miscellaneous system, revision 0x10) at pci0 dev
10 function 2 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3713 (miscellaneous system, revision 0x10) at pci0 dev
10 function 3 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3714 (miscellaneous system, revision 0x10) at pci0 dev
10 function 4 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3715 (miscellaneous system, revision 0x10) at pci0 dev
10 function 5 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3716 (miscellaneous system, revision 0x10) at pci0 dev
10 function 6 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3717 (miscellaneous system, revision 0x10) at pci0 dev
10 function 7 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x373f (interrupt system, interface 0x20, revision 0x10)
at pci0 dev 11 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371a (miscellaneous system, revision 0x10) at pci0 dev
16 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371b (miscellaneous system, revision 0x10) at pci0 dev
16 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371d (miscellaneous system, revision 0x10) at pci0 dev
17 function 0 not configured
nbsd_kbde_match invoked
wm0 at pci0 dev 25 function 0: PCH LAN (82578DM) Controller, rev. 5
wm0: interrupting at ioapic0 pin 20
wm0: Ethernet address 88:88:88:88:87:88
ukphy0 at wm0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
nbsd_kbde_match invoked
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
usb0 at ehci0: USB revision 2.0
nbsd_kbde_match invoked
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x3b56 (rev. 5), HDA rev. 1.0
azalia0: No HD-Audio codecs
azalia0: initialization failure
nbsd_kbde_match invoked
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
usb1 at ehci1: USB revision 2.0
nbsd_kbde_match invoked
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci4 at ppb3 bus 4
nbsd_kbde_match invoked
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x3b14 (rev. 0x05)
nbsd_kbde_match invoked
piixide0 at pci0 dev 31 function 2
piixide0: Intel 3400 Serial ATA Controller (rev. 0x05)
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
nbsd_kbde_match invoked
vendor 0x8086 product 0x3b30 (SMBus serial bus, revision 0x05) at pci0 dev 31
function 3 not configured
nbsd_kbde_match invoked
piixide1 at pci0 dev 31 function 5
piixide1: Intel 3400 Serial ATA Controller (rev. 0x05)
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
atabus3 at piixide1 channel 1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
uhub0 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2
uhub3: single transaction translator
wd0 at atabus1 drive 0: <SILICONSYSTEMS INC 2GB>
wd0: 2001 MB, 4066 cyl, 16 head, 63 sec, 512 bytes/sect x 4098528 sectors
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Too many symbols for tree, skipping 21808 symbols
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
bcnp pseduo-device
bcmw pseduo-device
bcmwstk pseduo-device
bcmws pseduo-device
bshell pseudo-device
Searching for RAID components...
boot device: wd0
root on md0a dumps on md0b
dump_misc_init: max_paddr = 0x3f800000
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying coda...
no file system for md0 (dev 0x1100)
cannot mount root, error = 79
root device (default md0a): [A [B WD0A wd0a
dump device (default wd0b):
file system (default generic):
root on wd0a dumps on wd0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
WARNING: clock lost 718 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init):
Enter pathname of shell or RETURN for /bin/sh:
[3g H H H H H H H
H H
CP CPU receiving excessive control plane traffic: will be rate controlled
Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root access.
/dev/wd0a: file system not clean (fs_clean=0); please fsck(8)
/dev/wd0a: lost blocks 0 files 0
#
#
#
#
#
#
#
#
#
# REBOOT[K[K[K[K[K[K reboot
Dec 23 16:02:26 reboot: rebooted by root syncing disks... done
unmounting file systems...
unmounting / (/dev/wd0a)... done
rebooting...
Status Code Available
Register PPI Notify: 36164812-a023-44e5-bd85-05bf3c7700aa
Notify: PPI Guid: 36164812-a023-44e5-bd85-05bf3c7700aa, Peim notify entry
point: fff87884
PeiDebugSupport.Entry(FFFCDD7C)
CpuPeiBeforeMem.Entry(FFF8BCE9)
NBPEI.Entry(FFF97D51)
NB PEI DMI Init.
NB PEI PCIe Init.
NB PEI Performance/PM Init.
SBPEI.Entry(FFF9410D)
<< createhob smb hob >>
Register PPI Notify: 71a8917b-0891-4e27-8a73-a9b334840393
Register PPI Notify: f894643d-c449-42d1-8ea8-85bdd8c65bde
MEPlatformPEI.Entry(FFF9970E)
ME Platform PEI Init start.
Register PPI Notify: 64c96700-6b4c-480c-a3e1-b8bde8f602b2
ME Platform PEI Init end.
HECIPEI.Entry(FFF9AD6A)
HECI PEI Init start.
HECI PEI Init end.
CsiandMrcInit.Entry(FFF9FA9A)
========== Entering UNCOREINIT ==========
RtidProfile before: 0
Setup variable is valid - QPI BS (BIOS STUFF).
MemCeil : 0xD0000000
Pci Resource Mem32 Range: 0xD0000000 - 0xFBFFFFFF
PciResourceMem64Base: 0x100000000
RB[0] Mem64 Range : 0x100000000 - 0xffffffffff
RB[1] Mem64 Range : 0x0 - 0x0
RtidProfile after: 0
Tohm : 0x0
HighMmioBase : 0x100000000
HighMmioLimit : 0xFFFFFFFFFF
========== Enter CSI RC code ==========
========== Exit CSI RC code ==========
FAST MRC BOOT MODE
Data in OemPreMrcStart
sizeof (struct hostNvram): 6476
sizeof (MRC_HOST_HOB): 6512
sizeof (MEMORY_INFO): 6556
Fast MRC Data restore successfully
LowGap: 12
Notify: PPI Guid: 71a8917b-0891-4e27-8a73-a9b334840393, Peim notify entry
point: fff9317d
========== Enter MRC code ==========
[00m[37m[40m
MRC rev: 01000000
Warm Boot Detected
Memory behind processor 0 running at DDR3-1066
RDIMM population
Channel Early Config
DDR training
Independant channel mode enabled on socket 0
ECC is enabled
Start Hardware Memory Init
MemInit latency 229 ms
Initialize Memory Map
Clear Errors
Set RAS Config
Total MRC latency = 299 ms
MRC latency - MemTest and MemInit = 70 ms
MRC is done!
========== Exit MRC code ==========
Notify: PPI Guid: 64c96700-6b4c-480c-a3e1-b8bde8f602b2, Peim notify entry
point: fff99590
Install PEI Memory.
Memory Installed: Address=2F800000; Length=10000000
PEI_STACK: Address=2F800000; Length=100000
HOBLIST address before memory init = 0xffb00400
HOBLIST address after memory init = 0x2f900000
InstallMrcPpi
Data in MemoryInit
sizeof(struct hostNvram): 6476
sizeof(MRC_HOST_HOB): 6512
sizeof(MEMORY_INFO): 6556
MrcHostHob->SizeOf_NvRam: 6476
MrcHostHob->SizeOf_MRCHOSTHOB: 6512
MrcHostHob->SizeOf_MEMORYINFO: 6556
MemoryInit Completion!!!!
After PeiCpuWorkaround (UncoreInitLateInit)
After PeiIohWorkaround (UncoreInitLateInit)
Tohm : 0x0
HighMmioBase : 0x100000000
HighMmioLimit : 0xFFFFFFFFFF
After OemUncoreInitHook (UncoreInitLateIohChipsetInit)
After OemUncoreInitHook (UncoreInitLateInit)
========== Exiting UNCOREINIT ==========
PEI core reallocated to memory
Total Cache as RAM: 130048 bytes.
CAR stack ever used: 65020 bytes.
CAR heap used: 10080 bytes.
Notify: PPI Guid: f894643d-c449-42d1-8ea8-85bdd8c65bde, Peim notify entry
point: fff943e8
Notify: PPI Guid: 36164812-a023-44e5-bd85-05bf3c7700aa, Peim notify entry
point: fff87884
S3Resume.Entry(FFCA042A)
CpuPei.Entry(FFF8DCCB)
Starting all APs.
Load AP Microcode. BSP and maybe NBSPs Microcode loaded in SEC.
Enable BSP and AP Cache.
APs waiting.
NumCpus = 2.
CPU initialization.
BSP APIC ID = 0.
Register PPI Notify: 605ea650-c65c-42e1-ba80-91a52ab618c6
Exit PEI CPU Driver.
CK505Pei.Entry(FFF91E37)
CK505Pei_Init Entry.
Program CK505 start.
Program CK505 end.
PEIM 8401a046-6f70-4505-8471-7015b40355e3 was not started!!
PEIM e008b434-0e73-440c-8612-a143f6a07bcb was not started!!
PEIM 32505be8-6469-4f79-9b01-66b3f9617e7d was not started!!
PEIM 811b4f4d-fb0b-4008-a42b-e551fd4a0f28 was not started!!
PEIM eb7d9740-db60-45c2-a7a0-c2714ef4eb56 was not started!!
PEIM 4aaaae15-5aeb-4c11-b91d-a3966ac04847 was not started!!
PEIM c7e8bb67-1c3f-41ba-820f-3d0e9c365042 was not started!!
PEIM a47438d5-94e9-49b3-bc31-7e6bc9363814 was not started!!
DXE IPL Entry(3F7FAA2A)
CORE_DXE.Entry(3F63E3F0)
Notify: PPI Guid: 605ea650-c65c-42e1-ba80-91a52ab618c6, Peim notify entry
point: fff8daff
DXE Status Code Available
[13AC6DD0-73D0-11D4-B06B-00AA00BD6DE7].Entry(159A6A0)
Runtime.Entry(3F220AE0)
GenericSIO: Variable Write Available!
GenericSIO: Get ISA_IRQ_MASK Status=EFI_NOT_FOUND Updating with DEFAULT E305
GenericSIO: Get ISA_DMA_MASK Status=EFI_NOT_FOUND Updating with DEFAULT 10
AmiBoardInfo.Entry(15DC2C0)
SBRun.Entry(3F209F90)
ACPIS3Save.Entry(15EBA00)
SmbiosGetFlashData64.Entry(15D8720)
ReFlash.Entry(15E6A70)
CpuDxe.Entry(1629190)
Intended Cpu Freq = 798
Actual Cpu Freq = 1747
AcpiResLib: LibGetDsdt(): LocateProtocol(ACPISupport) returned EFI_NOT_FOUND
ACPI.Entry(1651420)
IN ACPI Start: 0
IN ACPI 1: 0
DSDT21 addres 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v1.0b RSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v2.0&UP XSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
SIO[0]: Aml=> Collected 3 DepFunc Items of FDC Object
SIO: Updating ISA_IRQ_MASK = 0xE305 with 0x40 for IRQ# 6
SIO[1]: Aml=> Failed to Locate _PRS Object in LPTE Object Scope at 015E0453
SIO[1]: Tbl=> Entry is Empty! Check 'YourSioName_DevLst' table.
SIO[1]: Aml=> Collected 7 DepFunc Items of LPTE Object
SIO: Updating ISA_IRQ_MASK = 0xE345 with 0x20 for IRQ# 5
SIO[2]: Aml=> Collected 5 DepFunc Items of UAR1 Object
SIO: Updating ISA_IRQ_MASK = 0xE365 with 0x10 for IRQ# 4
SIO[3]: Aml=> Collected 5 DepFunc Items of UAR2 Object
SIO: Updating ISA_IRQ_MASK = 0xE375 with 0x8 for IRQ# 3
SIO[4]: Aml=> Collected 1 DepFunc Items of PS2K Object
SIO: Updating ISA_IRQ_MASK = 0xE37D with 0x2 for IRQ# 1
SIO[5]: Aml=> Collected 1 DepFunc Items of PS2M Object
SIO: Updating ISA_IRQ_MASK = 0xE37F with 0x1000 for IRQ# 12
SIO[6]: Tbl=> IO1.B=290; IO1.L=10;
AcpiResLib: LibGetDsdt(): Found v1.0b RSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v2.0&UP XSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
ACPI: SetAcpiTable() Table=0x13DF618; Handle=0x2F8FF4D0; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
SmbiosElogSetupScreen.Entry(1664280)
PciRootBridge.Entry(16C6520)
PciHostCSHooks: LocateProtocol(ACPISupport)=EFI_SUCCESS
ACPI: SetAcpiTable() Table=0x15E8618; Handle=0x16E8808; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
PciHostCSHooks: ACPISupport->SetAcpiTable(MCFG) = EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v1.0b RSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v2.0&UP XSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
IO1E = 0
EventLogsSetupPage.Entry(15F6760)
CspLibDxe.Entry(1626240)
NBDXE.Entry(16FA110)
TSEG Base: 3f800000
GCD: AddMemSpace B=3F800000, L=800000, i=0, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=3F800000, L=800000, i=0, S=EFI_SUCCESS
GCD: AddMemSpace B=FEE00000, L=100000, i=1, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEE00000, L=100000, i=1, S=EFI_SUCCESS
GCD: AddMemSpace B=FEB00000, L=100000, i=2, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEB00000, L=100000, i=2, S=EFI_SUCCESS
GCD: AddMemSpace B=FEA00000, L=20, i=3, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEA00000, L=20, i=3, S=EFI_SUCCESS
GCD: AddMemSpace B=FE800000, L=200000, i=4, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FE800000, L=200000, i=4, S=EFI_SUCCESS
GCD: AddMemSpace B=FE000000, L=800000, i=5, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FE000000, L=800000, i=5, S=EFI_SUCCESS
GCD: AddMemSpace B=FD000000, L=1000000, i=6, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FD000000, L=1000000, i=6, S=EFI_SUCCESS
GCD: AddMemSpace B=FC000000, L=1000000, i=7, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FC000000, L=1000000, i=7, S=EFI_SUCCESS
GCD: AddMemSpace B=FBFFE000, L=2000, i=8, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FBFFE000, L=2000, i=8, S=EFI_SUCCESS
GCD: AddMemSpace B=D0000000, L=10000000, i=9, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=D0000000, L=10000000, i=9, S=EFI_SUCCESS
GCD: AddI/OSpace B=CF8, L=8, i=10, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=CF8, L=8, i=10, S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000000 B=3F800000, L=800000, i=0, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEE00000, L=100000, i=1, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEB00000, L=100000, i=2, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEA00000, L=20, i=3, S=EFI_UNSUPPORTED
GCD: SpaceAttr A=1 B=FE800000, L=200000, i=4, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FE000000, L=800000, i=5, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FD000000, L=1000000, i=6, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FC000000, L=1000000, i=7, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FBFFE000, L=2000, i=8, S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000001 B=D0000000, L=10000000, i=9, S=EFI_SUCCESS
Initializing NTB for IIO 0
Port 0:3 Active. Max Link Width = 4
Port 0:4 Active. Max Link Width = 4
Port 0:5 Active. Max Link Width = 8
Max Link Width changed. Retraining port
NB NUMA get System Mem Map HOB error !
TSEG Address 3f800000.
TSEG size 800000.
Creating Memory Data for SMBIOS.
--DIMM Speed = 1067 MHz
--Array[0] Device[2] Size = 1024 MB
LegacyInterrupt.Entry(16EA380)
LegacyRegion.Entry(16F1550)
VTdDXE.Entry(1705210)
ERROR: VTdDXE.Entry(1705210)=EFI_UNSUPPORTED
SMBiosBoard.Entry(17093F0)
OEMDXE.Entry(170C2F0)
SBDXE.Entry(172D2A0)
GCD: AddMemSpace B=FF000000, L=1000000, i=0, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FF000000, L=1000000, i=0, S=EFI_SUCCESS
GCD: AddMemSpace B=FED1C000, L=4000, i=1, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FED1C000, L=4000, i=1, S=EFI_SUCCESS
GCD: AddMemSpace B=FED00000, L=4000, i=2, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FED00000, L=4000, i=2, S=EFI_SUCCESS
GCD: AddMemSpace B=FEC00000, L=100000, i=3, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEC00000, L=100000, i=3, S=EFI_SUCCESS
GCD: AddI/OSpace B=400, L=80, i=4, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=400, L=80, i=4, S=EFI_SUCCESS
GCD: AddI/OSpace B=500, L=80, i=5, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=500, L=80, i=5, S=EFI_SUCCESS
GCD: AddI/OSpace B=1180, L=20, i=6, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=1180, L=20, i=6, S=EFI_SUCCESS
GCD: SpaceAttr (UC ALL) B=FEC00000; L=1400000;
GCD:(UC ALL) setting B=FEC00000, L=104000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FED04000, L=18000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FED1C000, L=4000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FED20000, L=E0000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) skipping B=FEE00000, L=100000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FEF00000, L=100000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FF000000, L=1000000, A=1; S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000001 B=FF000000, L=1000000, i=0, S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000001 B=FED1C000, L=4000, i=1, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FED00000, L=4000, i=2, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEC00000, L=100000, i=3, S=EFI_SUCCESS
HPET: FED1F404 = 80
HPET LocateProtocol(ACPISupport)- EFI_SUCCESS Success
ACPI: SetAcpiTable() Table=0x1706D18; Handle=0x17392E8; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
ACPISupport.SetAcpiTable() = EFI_SUCCESS
MEPlatformDXE.Entry(1742780)
HECIDXE.Entry(17282E0)
MeCore.Entry(174A380)
BiosExtension.Entry(174CCF0)
FileSystem.Entry(17536F0)
PciBus.Entry(17CC4A0)
SBIDE.Entry(17AFCC0)
SBAHCI.Entry(17B5D90)
AHCI.Entry(17E42A0)
AINT13.Entry(17A8280)
AMITSE.Entry(18255C8)
CSMCORE.Entry(1846C60)
BIOSBLKIO.Entry(1812760)
CsmVideo.Entry(18172A0)
Terminal.Entry(18C3780)
SMBios64.Entry(18D9CD0)
SmmBase.Entry(18E0050)
SMM.SmmDispatcher.Entry(3F81A310)
SMM.Runtime.Entry(3F822AE0)
SmmChildDispatcher.Entry(1D3A8F0)
SMM.SmmChildDispatcher.Entry(3F8378F0)
AhciSmm.Entry(1D476B0)
SMM.AhciSmm.Entry(3F83E6B0)
ERROR: AhciSmm.Entry(3F83E6B0)=EFI_NOT_FOUND
ERROR: AhciSmm.Entry(1D476B0)=EFI_NOT_FOUND
SmbiosElog.Entry(3F1F6320)
SmmRuntime.Entry(3F1C0310)
SMM.SmmRuntime.Entry(3F83D310)
SMM.SmbiosElog.Entry(3F844320)
MicrocodeUpdate.Entry(1D59260)
SMM.MicrocodeUpdate.Entry(3F84A260)
SBSMI.Entry(1D66350)
SMM.SBSMI.Entry(3F852350)
AcpiModeEnable.Entry(1D6F940)
SMM.AcpiModeEnable.Entry(3F856940)
GenericElog.Entry(3F1B3260)
SMM.GenericElog.Entry(3F85B260)
RtErrorLog.Entry(3F1AD4B0)
SMM.RtErrorLog.Entry(3F85E4B0)
RtErrorLogging Disabled.
SMIFlash.Entry(1D7EC40)
SMM.SMIFlash.Entry(3F864C40)
SmiFlash: Flash Protocol 3F830EB0
PowerButton.Entry(1D85380)
SMM.PowerButton.Entry(3F868380)
UHCD.Entry(1DC22A0)
SleepSmi.Entry(1D8A290)
SMM.SleepSmi.Entry(3F86B290)
DataHubErrorCollector.Entry(1D8C390)
SmbiosDMIEdit.Entry(1DDB630)
SMM.SmbiosDMIEdit.Entry(3F86D630)
USBRT.Entry(1E1A2A0)
SMM.USBRT.Entry(3F8742A0)
USBINT13.Entry(1DFE2A0)
Driver 4a37320b-3fb3-4365-9730-9e89c600395d was discovered but not loaded!!
Driver c253ed0a-c48b-4ee3-a65e-75f61f3ad251 was discovered but not loaded!!
Driver 511d0266-f2e0-4df8-ae3a-fdb98523bfb9 was discovered but not loaded!!
Driver 899407d7-99fe-43d8-9a21-79ec328cac21 was discovered but not loaded!!
AMI PCI Bus Driver.Start(17DD470)=Rb[0]: Bus _MIN=0x0; _MAX=0x4; _LEN=0x5
Rb[0]: Allocating IO: Bottom Up; Granularity = 0xfff; Memory Size = 0x1100
-- Searching IO Map
-- Allocated range = 0x2000 - 0x30ff
Rb[0]: Allocating 32-bit MMIO: AddressLimit = 0xfc000000; Granularity =
0xfffff; Memory Size = 0x14a000
--Setting UC attributes.
-- Allocated range = 0xfbe00000 - 0xfbf49fff
Rb[0]: Allocating 32-bit MMIO: AddressLimit = 0xfc000000; Granularity =
0xfffff; Memory Size = 0x110000
--Prefetchable Memory: Setting WT attributes. --
Failed(EFI_UNSUPPORTED). Setting to UC.
-- Allocated range = 0xfbc00000 - 0xfbd0ffff
Rb[0]: Lowest 32bit MMIO Allocated = 0xf8000000
PciRb: HbNotifyCspEndResourceAllocation...
PciRb: Triggering PCIe Error Logging Callback...
PCI Bus, Device, function = 0, 0,0
Root Bridge 0 Bus #: 0
Max Bus #: 255
PCI Bus 17 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 18 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 19 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 20 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 21 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 22 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 23 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 24 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 0 ---> 0
PCI Bus 3 ---> 1
PCI Bus 4 ---> 2
PCI Bus 5 ---> 3
PCI Bus 6 ---> P2P bridge entry not found in BusNumXlat table, entry suppressed.
PCI Bus 128 ---> 0
PCI Bus 129 ---> 0
PCI Bus 131 ---> 1
PCI Bus 132 ---> 2
PCI Bus 133 ---> 3
PCI Bus 134 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 25 ---> 4
Finished updating BusNumXlat table, 0 entries remaining.
$PIR table:
0 f8 62 dc78 63 dc78 62 dc78 0 0 0
0 e8 6b dcf8 63 dc78 60 dcf8 62 dc78 0
0 d0 60 dcf8 69 dcf8 62 dc78 63 dc78 0
0 d8 6a dcf8 0 0 0 0 0 0 0
0 c8 68 dcf8 0 0 0 0 0 0 0
0 b0 60 dcf8 61 dcf8 62 dc78 0 0 0
0 e0 61 dcf8 60 dcf8 62 dc78 63 dc78 0
0 0 60 dcf8 0 0 0 0 0 0 0
0 18 60 dcf8 0 0 0 0 0 0 0
0 20 60 dcf8 0 0 0 0 0 0 0
0 28 60 dcf8 0 0 0 0 0 0 0
0 30 60 dcf8 0 0 0 0 0 0 0
0 50 60 dcf8 61 dcf8 62 dc78 63 dc78 0
1 0 60 dcf8 61 dcf8 62 dc78 63 dc78 3
2 0 60 dcf8 61 dcf8 62 dc78 63 dc78 4
3 0 60 dcf8 61 dcf8 62 dc78 63 dc78 5
0 0 60 dcf8 0 0 0 0 0 0 0
0 18 60 dcf8 0 0 0 0 0 0 0
0 20 60 dcf8 0 0 0 0 0 0 0
0 28 60 dcf8 0 0 0 0 0 0 0
0 30 60 dcf8 0 0 0 0 0 0 0
0 50 60 dcf8 61 dcf8 62 dc78 63 dc78 0
0 0 60 dcf8 61 dcf8 62 dc78 63 dc78 11
1 0 60 dcf8 61 dcf8 62 dc78 63 dc78 13
2 0 60 dcf8 61 dcf8 62 dc78 63 dc78 14
3 0 60 dcf8 61 dcf8 62 dc78 63 dc78 15
4 0 60 dcf8 61 dcf8 62 dc78 63 dc78 21
0 0 0 0 0 0 0 0 0 0 0
PCI device: 0 3 0 ... P2P bridge.
AddonPciBusTable entry [0] created: Bus 1, PIRQs: 60 0 0 0
Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 0....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D3/F0
PCI device: 1 0 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B1/D0/F0
PCI device: 0 4 0 ... P2P bridge.
AddonPciBusTable entry [1] created: Bus 2, PIRQs: 60 0 0 0
Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D4/F0
PCI device: 0 5 0 ... P2P bridge.
AddonPciBusTable entry [2] created: Bus 3, PIRQs: 60 0 0 0
Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D5/F0
PCI device: 3 0 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B3/D0/F0
PCI device: 3 0 1 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 1....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 1 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B3/D0/F1
PCI device: 0 8 0 ... does not require IRQ.
PCI device: 0 8 1 ... does not require IRQ.
PCI device: 0 8 2 ... does not require IRQ.
PCI device: 0 8 3 ... does not require IRQ.
PCI device: 0 9 0 ... does not require IRQ.
PCI device: 0 a 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F0
PCI device: 0 a 1 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[1] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 1 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F1
PCI device: 0 a 2 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2387....f3ff....
irq_priority_index 2....
irq_priority_index 3....
irq_priority_index 4....
irq_priority_index 5....
irq_priority_index 6....
irq_priority_index 7....
irq_priority_index 8....
irq_priority_index 0....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 2 IRQ b mask dc78
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F2
PCI device: 0 a 3 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2387....f3ff....
irq_priority_index 1....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F3
PCI device: 0 a 4 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F4
PCI device: 0 a 5 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[1] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 1 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F5
PCI device: 0 a 6 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[2] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 2 IRQ b mask dc78
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F6
PCI device: 0 a 7 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[3] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F7
PCI device: 0 b 0 ... does not require IRQ.
PCI device: 0 10 0 ... does not require IRQ.
PCI device: 0 10 1 ... does not require IRQ.
PCI device: 0 11 0 ... does not require IRQ.
PCI device: 0 16 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D22/F0
PCI device: 0 19 0 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 2....
irq_priority_index 3....
irq_priority_index 4....
irq_priority_index 5....
irq_priority_index 6....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 4 IRQ 7 mask dcf8
Ready to install interrupt handler for IRQ7 for PCI B0/D25/F0
PCI device: 0 1a 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D26/F0
PCI device: 0 1b 0 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 7....
irq_priority_index 8....
irq_priority_index 0....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 6 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D27/F0
PCI device: 0 1d 0 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 1....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 7 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B0/D29/F0
PCI device: 0 1e 0 ... P2P bridge.
does not require IRQ.
PCI device: 0 1f 0 ... does not require IRQ.
PCI device: 0 1f 2 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[3] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D31/F2
PCI device: 0 1f 3 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[2] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 2 IRQ b mask dc78
Ready to install interrupt handler for IRQ11 for PCI B0/D31/F3
PCI device: 0 1f 5 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[3] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D31/F5
EFI_SUCCESS
Pci.Header.ClassCode[1] = 1, Pci.Header.ClassCode[2] = 6
AMI Generic LPC Super I/O Driver.Start(3F649480)=
SIO[0] Starting: SIO: Updating ISA_DMA_MASK = 0xF37F with 0x4 for Chnl 2
InitSioDev()=EFI_SUCCESS; SIO[1] Starting: InitSioDev()=EFI_SUCCESS; SIO[2]
Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
RDP; StartSioDev()=EFI_SUCCESS; Hnd=1E16C18;
EFI_SUCCESS
AMI Serial I/O Driver.Start(18C5B58)EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=ACPI: SetAcpiTable() Table=0x1E17E18;
Handle=0x18C9350; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=[2J[1;1HEFI_SUCCESS
AMI Generic LPC Super I/O Driver.Start(3F649480)=
SIO[0] Starting: InitSioDev()=EFI_SUCCESS; SIO[1] Starting:
InitSioDev()=EFI_SUCCESS; SIO[2] Starting: InitSioDev()=EFI_SUCCESS; SIO[3]
Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
RDP; StartSioDev()=EFI_SUCCESS; Hnd=1E47F18;
EFI_SUCCESS
AMI Serial I/O Driver.Start(18C5B58)=EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
[25;78H98[1;1HUHCD.Start(1DC3410)=[25;78H9D[1;1HEFI_SUCCESS
USB bus.Start(1DCBA00)=EFI_SUCCESS
UHCD.Start(1DC3410)=EFI_SUCCESS
USB
bus.Start(1DCBA00)=[25;78H9C[1;1H[25;78HB4[1;1H[25;78HB4[1;1HEFI_SUCCESS
AMI Generic LPC Super I/O Driver.Start(3F649480)=[25;78H99[1;1H
SIO[0] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4DB18;
SIO[1] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4D998;
SIO[2] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E16C18;
SIO[3] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E47F18;
SIO[4] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4D398;
SIO[5] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4D098;
SIO[6] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4FC98;
SIO[7] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[8] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[9] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[10] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[11] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[12] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[13] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[14] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
EFI_SUCCESS
AMI PS/2 Driver.Start(3F63F060)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
AMI PS/2 Driver.Start(3F63F060)=EFI_SUCCESS
AMI PCI Bus Driver.Start(17DD470)=[25;78H92[1;1HEFI_ALREADY_STARTED
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 7
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 3, Pci.Header.ClassCode[2] = 4
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
AMI Generic LPC Super I/O Driver.Start(3F649480)=[25;78H99[1;1H
SIO[0] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4DB18;
SIO[1] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4D998;
SIO[2] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E16C18;
SIO[3] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E47F18;
SIO[4] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4D398;
SIO[5] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4D098;
SIO[6] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4FC98;
SIO[7] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[8] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[9] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[10] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[11] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[12] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[13] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[14] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
EFI_SUCCESS
AMI Serial I/O Driver.Start(18C5B58)=EFI_UNSUPPORTED
AMI Serial I/O Driver.Start(18C5B58)=EFI_UNSUPPORTED
Pci.Header.ClassCode[1] = 1, Pci.Header.ClassCode[2] = 1
FOUND MASS STORAGE CONTROLLER: 8086 3b20
BIOSBLKIO.Start(1812BB0)=EFI_UNSUPPORTED
SBIDE.Start(17AFF80)=EFI_SUCCESS
AMI IDE BUS
Driver.Start(3F676830)=[25;78HA0[1;1H[25;78HA2[1;1H[25;78HA3[1;1HEFI_SUCCESS
AMI Disk I/O Driver.Start(3F643E70)=EFI_SUCCESS
FileSystem.Start(1753A00)=EFI_SUCCESS
AMI Partition Driver.Start(3F63F660)=EFI_SUCCESS
AMI Disk I/O Driver.Start(3F643E70)=EFI_SUCCESS
FileSystem.Start(1753A00)=EFI_SUCCESS
AMI Partition Driver.Start(3F63F660)=EFI_INVALID_PARAMETER
Pci.Header.ClassCode[1] = 5, Pci.Header.ClassCode[2] = c
SBDXE.Start(1731320)=EFI_SUCCESS
Pci.Header.ClassCode[1] = 1, Pci.Header.ClassCode[2] = 1
FOUND MASS STORAGE CONTROLLER: 8086 3b26
BIOSBLKIO.Start(1812BB0)=EFI_UNSUPPORTED
SBIDE.Start(17AFF80)=EFI_SUCCESS
AMI IDE BUS
Driver.Start(3F676830)=[25;78HA0[1;1H[25;78HA2[1;1H[25;78HA3[1;1HEFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
AMI Generic LPC Super I/O Driver.Stop=
GenericSIOStop: NumberOfChildren=0x1, Controller=0x1E13498
SIO[0] Stopping: Closing(PciIo)=EFI_SUCCESS; Uninstalling(AmiSio;
DP)=EFI_SUCCESS; EFI_SUCCESS.
EFI_SUCCESS
[25;78HB2[1;1HOptionROM for B0/D19/F0 is executed from 7100:0003
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=ACPI: SetAcpiTable() Table=0x1E47118;
Handle=0x18C9350; *Handle=0x1E17D98
ACPI: SetAcpiTable() Hnd!=0, Removing Tbl. Ver=0xE, TblNum=0x7 Status =
EFI_SUCCESS
ACPI: Cant't Delete Tble From Storage: Status = EFI_SUCCESS
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=[2J[1;1H
B2[1;1HEFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
0 19 0..NewRomSize = 1000
FetchBbsBootDevices: B0/D19/F0, ClassCode 2
PCI OPROM(handle 1e13e98, 0/19/0): addr c0000, size 1000
CsmBsp: Installing service ROM, 191ae40...[25;78HB2[1;1HOptionROM for
B0/D0/F0 is executed from c100:0003
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=ACPI: SetAcpiTable() Table=0x1E6BA18;
Handle=0x18C9350; *Handle=0x1E47298
ACPI: SetAcpiTable() Hnd!=0, Removing Tbl. Ver=0xE, TblNum=0x7 Status =
EFI_SUCCESS
ACPI: Cant't Delete Tble From Storage: Status = EFI_SUCCESS
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=[2J[1;1H
B2[1;1HEFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
0 0 0..NewRomSize = 1000
FetchBbsBootDevices: B0/D0/F0, ClassCode 1
PCI OPROM(handle 0, 0/0/0): addr c1000, size 1000
...OK, size 7800
Setup.Entry(1FC5FF0)
[0;37;40m[2J[1;37;40m[1;1HVersion 2.00.1201. Copyright (C) 2009 American
Megatrends, Inc. [2;1HEVALUATION COPY.
[3;1HPress <DEL> or <F2> to enter
setup. IN Collect AML Info: 0
IN Collect AML Info after PT: 0
[2JShellSource.Entry(225412C)
[0;37;40m[1;33;40mEFI Shell version 2.00 [4.637]
[0;37;40mCurrent running mode [1;37;40m1.1.2[0;37;40m
[1;33;40mDevice mapping table[0;37;40m
[1;33;40mblk0[0;37;40m :HardDisk - [1;37;40mAlias[0;37;40m
[1;33;40m(null)[0;37;40m
[1;33;40m [0;37;40m
Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Secondary,Master)/HD(Part1,SigE3F554B0)
[1;33;40mblk1[0;37;40m :BlockDevice - [1;37;40mAlias[0;37;40m
[1;33;40m(null)[0;37;40m
[1;33;40m [0;37;40m Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Secondary,Master)
Press [1;37;40mESC[0;37;40m in 5 seconds to skip
[1;33;40mstartup.nsh[0;37;40m, any other key to continue.
[10;1H[1;33;40mShell> exit[10;12H[0;37;40m
[2J
[2J[1;37;40m[2JIN Collect AML Info: 0
IN Collect AML Info after PT: 0
[2J[2J_____BBS_TABLE_____
#03: 0 00/1F/02 1 1 2 3F710000 handle: 1e53418 0, PATA: SILICONSYSTEMS INC 2GB
Handle=1e53418, HandleProtocol status: EFI_SUCCESS, DevicePath: 1e53618
#17: 1 00/19/00 2 0 6 3F710000 handle: 0 0, IBA GE Slot 00C8 v1335
>> NetBSD/x86 BIOS Boot, Revision 5.2 (from NetBSD 5.0.2)
>> Memory: 635/1031648 k
1. Boot normally netbsd.ok
2. Boot normally
3. Boot single user
4. Disable ACPI
5. Disable ACPI and SMP
6. Drop to boot prompt
Choose an option; RETURN for default; SPACE to stop countdown.
Option 1 will be chosen in 5 4 0
Option: [1]:! ! ! 1
booting hd0a:netbsd.ok
|/-\|/-17399196\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+12599724-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+2059272\|
[873664/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+1130440|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/]=0x207d5e0
kernel text is mapped with 4 large pages and 409 normal pages
Loaded initial symtab at 0xc1f93db4, strtab at 0xc2069618, # entries 54585
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0_STABLE (PHOENIX) #29: Wed Dec 8 13:26:47 IST 2010
kbhaskara@iccbuild-maa-01:/work/sw/kbhaskara/S6410BsdTest/SW-NetBSD5/usr/src/sys/arch/i386/compile/PHOENIX
total memory = 1009 MB
avail memory = 960 MB
sysctl_createv: sysctl_locate(tcpctl_mib2_group) returned 2
sysctl_createv: sysctl_locate(tcpctl_mib2_exaxt_conn_entry) returned 2
sysctl_createv: sysctl_locate(tcpctl_mib2_next_conn_entry) returned 2
sysctl_createv: sysctl_create(ip0) returned 17
sysctl_createv: sysctl_create(ip1) returned 17
sysctl_createv: sysctl_create(ip2) returned 17
To be filled by O.E.M. To be filled by O.E.M. (To be filled by O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1733MHz, id 0x106e4
cpu1 at mainbus0 apid 1: Intel 686-class, 1733MHz, id 0x106e4
ioapic0 at mainbus0 apid 0
ioapic1 at mainbus0 apid 2
acpi0 at mainbus0: Intel ACPICA 20080321
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
com3 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com3: console
com4 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
com4: ns16550a, working fifo
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
nbsd_kbde_match invoked
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x370a (rev. 0x10)
nbsd_kbde_match invoked
ppb0 at pci0 dev 3 function 0: vendor 0x8086 product 0x3721 (rev. 0x10)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
nbsd_kbde_match invoked
nbsd_kbde0 at pci1 dev 0 function 0nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x1
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xb
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
[ BCM ] Sal Mutex Create, Mutex 0xc33f4600
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47173 and revision 3
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FBE00004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfbe00004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:CCD56000 TAG:0x1 ADDR:FBE00000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xccd56000)
INT REG:0000010b
enter :kbde_dmamem_alloc
BCM Bus Space mem Handle = 0xc1426300
_dma_pbase = 0x3800000
kva=0xccd96000/0x800000,map=0xc34ab900,nsegs=1,pa=3800000/800000
DMA VBASE:0xccd96000 DMA PBASE:3800000
nbsd_kbde_match invoked
ppb1 at pci0 dev 4 function 0: vendor 0x8086 product 0x3722 (rev. 0x10)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
nbsd_kbde_match invoked
ppb2 at pci0 dev 5 function 0: vendor 0x8086 product 0x3723 (rev. 0x10)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
nbsd_kbde_match invoked
vendor 0x8086 product 0x10d8 (ethernet network, revision 0x01) at pci3 dev 0
function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x10d8 (ethernet network, revision 0x01) at pci3 dev 0
function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3728 (miscellaneous system, revision 0x10) at pci0 dev
8 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3729 (miscellaneous system, revision 0x10) at pci0 dev
8 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372a (miscellaneous system, revision 0x10) at pci0 dev
8 function 2 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372b (miscellaneous system, revision 0x10) at pci0 dev
8 function 3 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372c (miscellaneous system) at pci0 dev 9 function 0
not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3718 (miscellaneous system, revision 0x10) at pci0 dev
10 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3719 (miscellaneous system, revision 0x10) at pci0 dev
10 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3712 (miscellaneous system, revision 0x10) at pci0 dev
10 function 2 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3713 (miscellaneous system, revision 0x10) at pci0 dev
10 function 3 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3714 (miscellaneous system, revision 0x10) at pci0 dev
10 function 4 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3715 (miscellaneous system, revision 0x10) at pci0 dev
10 function 5 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3716 (miscellaneous system, revision 0x10) at pci0 dev
10 function 6 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3717 (miscellaneous system, revision 0x10) at pci0 dev
10 function 7 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x373f (interrupt system, interface 0x20, revision 0x10)
at pci0 dev 11 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371a (miscellaneous system, revision 0x10) at pci0 dev
16 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371b (miscellaneous system, revision 0x10) at pci0 dev
16 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371d (miscellaneous system, revision 0x10) at pci0 dev
17 function 0 not configured
nbsd_kbde_match invoked
wm0 at pci0 dev 25 function 0../../../../dev/pci/if_wm.c wm_attach:1016 Not
found macaddr from bios!
: PCH LAN (82578DM) Controller, rev. 5
wm0: interrupting at ioapic0 pin 20
Unable to get the mac-addr property!
wm0: Ethernet address 88:88:88:88:87:88
ukphy0 at wm0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
nbsd_kbde_match invoked
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
usb0 at ehci0: USB revision 2.0
nbsd_kbde_match invoked
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x3b56 (rev. 5), HDA rev. 1.0
azalia0: No HD-Audio codecs
azalia0: initialization failure
nbsd_kbde_match invoked
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
usb1 at ehci1: USB revision 2.0
nbsd_kbde_match invoked
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci4 at ppb3 bus 4
nbsd_kbde_match invoked
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x3b14 (rev. 0x05)
nbsd_kbde_match invoked
piixide0 at pci0 dev 31 function 2
piixide0: Intel 3400 Serial ATA Controller (rev. 0x05)
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
nbsd_kbde_match invoked
vendor 0x8086 product 0x3b30 (SMBus serial bus, revision 0x05) at pci0 dev 31
function 3 not configured
nbsd_kbde_match invoked
piixide1 at pci0 dev 31 function 5
piixide1: Intel 3400 Serial ATA Controller (rev. 0x05)
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
atabus3 at piixide1 channel 1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
uhub0 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2
uhub3: single transaction translator
wd0 at atabus1 drive 0: <SILICONSYSTEMS INC 2GB>
wd0: 2001 MB, 4066 cyl, 16 head, 63 sec, 512 bytes/sect x 4098528 sectors
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Too many symbols for tree, skipping 21818 symbols
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
Searching for RAID components...
boot device: wd0
root on md0a dumps on md0b
dump_misc_init: max_paddr = 0x3f800000
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
WARNING: clock lost 703 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
route: writing to routing socket: File exists
add host 127.10.10.10: gateway 127.10.10.10: File exists
Partitioning 1GB flash ....Failed!!
File system not formatted. Formatting....Failed!
Filesystem not formatted. Formatting...Failed!
Filesystem not formatted. Formatting...Failed!
mount: cannot open `/dev/rwd0f': No such file or directory
/etc/rc.cpload[79]: /sbin/rpmAppLoad: not found
Error: could not find release record. Aborting.
rpm0-cp 5 # CP CPU receiving excessive control plane traffic: will be rate
controlled
rpm0-cp 5 # rpm0-cp 5 # rpm0-cp 5 # rpm0-cp 5 # rpm0-cp 5 # rpm0-cp 5 #
reboot rebooted by root
syncing disks... done
unmounting file systems...
unmounting /f10 (mfs:19)...
unmounting / (/dev/md0a)... done
rebooting...
Status Code Available
Register PPI Notify: 36164812-a023-44e5-bd85-05bf3c7700aa
Notify: PPI Guid: 36164812-a023-44e5-bd85-05bf3c7700aa, Peim notify entry
point: fff87884
PeiDebugSupport.Entry(FFFCDD7C)
CpuPeiBeforeMem.Entry(FFF8BCE9)
NBPEI.Entry(FFF97D51)
NB PEI DMI Init.
NB PEI PCIe Init.
NB PEI Performance/PM Init.
SBPEI.Entry(FFF9410D)
<< createhob smb hob >>
Register PPI Notify: 71a8917b-0891-4e27-8a73-a9b334840393
Register PPI Notify: f894643d-c449-42d1-8ea8-85bdd8c65bde
MEPlatformPEI.Entry(FFF9970E)
ME Platform PEI Init start.
Register PPI Notify: 64c96700-6b4c-480c-a3e1-b8bde8f602b2
ME Platform PEI Init end.
HECIPEI.Entry(FFF9AD6A)
HECI PEI Init start.
HECI PEI Init end.
CsiandMrcInit.Entry(FFF9FA9A)
========== Entering UNCOREINIT ==========
RtidProfile before: 0
Setup variable is valid - QPI BS (BIOS STUFF).
MemCeil : 0xD0000000
Pci Resource Mem32 Range: 0xD0000000 - 0xFBFFFFFF
PciResourceMem64Base: 0x100000000
RB[0] Mem64 Range : 0x100000000 - 0xffffffffff
RB[1] Mem64 Range : 0x0 - 0x0
RtidProfile after: 0
Tohm : 0x0
HighMmioBase : 0x100000000
HighMmioLimit : 0xFFFFFFFFFF
========== Enter CSI RC code ==========
========== Exit CSI RC code ==========
FAST MRC BOOT MODE
Data in OemPreMrcStart
sizeof (struct hostNvram): 6476
sizeof (MRC_HOST_HOB): 6512
sizeof (MEMORY_INFO): 6556
Fast MRC Data restore successfully
LowGap: 12
Notify: PPI Guid: 71a8917b-0891-4e27-8a73-a9b334840393, Peim notify entry
point: fff9317d
========== Enter MRC code ==========
[00m[37m[40m
MRC rev: 01000000
Warm Boot Detected
Memory behind processor 0 running at DDR3-1066
RDIMM population
Channel Early Config
DDR training
Independant channel mode enabled on socket 0
ECC is enabled
Start Hardware Memory Init
MemInit latency 229 ms
Initialize Memory Map
Clear Errors
Set RAS Config
Total MRC latency = 299 ms
MRC latency - MemTest and MemInit = 70 ms
MRC is done!
========== Exit MRC code ==========
Notify: PPI Guid: 64c96700-6b4c-480c-a3e1-b8bde8f602b2, Peim notify entry
point: fff99590
Install PEI Memory.
Memory Installed: Address=2F800000; Length=10000000
PEI_STACK: Address=2F800000; Length=100000
HOBLIST address before memory init = 0xffb00400
HOBLIST address after memory init = 0x2f900000
InstallMrcPpi
Data in MemoryInit
sizeof(struct hostNvram): 6476
sizeof(MRC_HOST_HOB): 6512
sizeof(MEMORY_INFO): 6556
MrcHostHob->SizeOf_NvRam: 6476
MrcHostHob->SizeOf_MRCHOSTHOB: 6512
MrcHostHob->SizeOf_MEMORYINFO: 6556
MemoryInit Completion!!!!
After PeiCpuWorkaround (UncoreInitLateInit)
After PeiIohWorkaround (UncoreInitLateInit)
Tohm : 0x0
HighMmioBase : 0x100000000
HighMmioLimit : 0xFFFFFFFFFF
After OemUncoreInitHook (UncoreInitLateIohChipsetInit)
After OemUncoreInitHook (UncoreInitLateInit)
========== Exiting UNCOREINIT ==========
PEI core reallocated to memory
Total Cache as RAM: 130048 bytes.
CAR stack ever used: 65020 bytes.
CAR heap used: 10080 bytes.
Notify: PPI Guid: f894643d-c449-42d1-8ea8-85bdd8c65bde, Peim notify entry
point: fff943e8
Notify: PPI Guid: 36164812-a023-44e5-bd85-05bf3c7700aa, Peim notify entry
point: fff87884
S3Resume.Entry(FFCA042A)
CpuPei.Entry(FFF8DCCB)
Starting all APs.
Load AP Microcode. BSP and maybe NBSPs Microcode loaded in SEC.
Enable BSP and AP Cache.
APs waiting.
NumCpus = 2.
CPU initialization.
BSP APIC ID = 0.
Register PPI Notify: 605ea650-c65c-42e1-ba80-91a52ab618c6
Exit PEI CPU Driver.
CK505Pei.Entry(FFF91E37)
CK505Pei_Init Entry.
Program CK505 start.
Program CK505 end.
PEIM 8401a046-6f70-4505-8471-7015b40355e3 was not started!!
PEIM e008b434-0e73-440c-8612-a143f6a07bcb was not started!!
PEIM 32505be8-6469-4f79-9b01-66b3f9617e7d was not started!!
PEIM 811b4f4d-fb0b-4008-a42b-e551fd4a0f28 was not started!!
PEIM eb7d9740-db60-45c2-a7a0-c2714ef4eb56 was not started!!
PEIM 4aaaae15-5aeb-4c11-b91d-a3966ac04847 was not started!!
PEIM c7e8bb67-1c3f-41ba-820f-3d0e9c365042 was not started!!
PEIM a47438d5-94e9-49b3-bc31-7e6bc9363814 was not started!!
DXE IPL Entry(3F7FAA2A)
CORE_DXE.Entry(3F63E3F0)
Notify: PPI Guid: 605ea650-c65c-42e1-ba80-91a52ab618c6, Peim notify entry
point: fff8daff
DXE Status Code Available
[13AC6DD0-73D0-11D4-B06B-00AA00BD6DE7].Entry(159A6A0)
Runtime.Entry(3F220AE0)
GenericSIO: Variable Write Available!
GenericSIO: Get ISA_IRQ_MASK Status=EFI_NOT_FOUND Updating with DEFAULT E305
GenericSIO: Get ISA_DMA_MASK Status=EFI_NOT_FOUND Updating with DEFAULT 10
AmiBoardInfo.Entry(15DC2C0)
SBRun.Entry(3F209F90)
ACPIS3Save.Entry(15EBA00)
SmbiosGetFlashData64.Entry(15D8720)
ReFlash.Entry(15E6A70)
CpuDxe.Entry(1629190)
Intended Cpu Freq = 798
Actual Cpu Freq = 1745
AcpiResLib: LibGetDsdt(): LocateProtocol(ACPISupport) returned EFI_NOT_FOUND
ACPI.Entry(1651420)
IN ACPI Start: 0
IN ACPI 1: 0
DSDT21 addres 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v1.0b RSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v2.0&UP XSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
SIO[0]: Aml=> Collected 3 DepFunc Items of FDC Object
SIO: Updating ISA_IRQ_MASK = 0xE305 with 0x40 for IRQ# 6
SIO[1]: Aml=> Failed to Locate _PRS Object in LPTE Object Scope at 015E0453
SIO[1]: Tbl=> Entry is Empty! Check 'YourSioName_DevLst' table.
SIO[1]: Aml=> Collected 7 DepFunc Items of LPTE Object
SIO: Updating ISA_IRQ_MASK = 0xE345 with 0x20 for IRQ# 5
SIO[2]: Aml=> Collected 5 DepFunc Items of UAR1 Object
SIO: Updating ISA_IRQ_MASK = 0xE365 with 0x10 for IRQ# 4
SIO[3]: Aml=> Collected 5 DepFunc Items of UAR2 Object
SIO: Updating ISA_IRQ_MASK = 0xE375 with 0x8 for IRQ# 3
SIO[4]: Aml=> Collected 1 DepFunc Items of PS2K Object
SIO: Updating ISA_IRQ_MASK = 0xE37D with 0x2 for IRQ# 1
SIO[5]: Aml=> Collected 1 DepFunc Items of PS2M Object
SIO: Updating ISA_IRQ_MASK = 0xE37F with 0x1000 for IRQ# 12
SIO[6]: Tbl=> IO1.B=290; IO1.L=10;
AcpiResLib: LibGetDsdt(): Found v1.0b RSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v2.0&UP XSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
ACPI: SetAcpiTable() Table=0x13DF618; Handle=0x2F8FF4D0; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
SmbiosElogSetupScreen.Entry(1664280)
PciRootBridge.Entry(16C6520)
PciHostCSHooks: LocateProtocol(ACPISupport)=EFI_SUCCESS
ACPI: SetAcpiTable() Table=0x15E8618; Handle=0x16E8808; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
PciHostCSHooks: ACPISupport->SetAcpiTable(MCFG) = EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v1.0b RSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
AcpiResLib: LibGetDsdt(): Found v2.0&UP XSDT->DSDT @ 0x15DDB30; -> EFI_SUCCESS
IO1E = 0
EventLogsSetupPage.Entry(15F6760)
CspLibDxe.Entry(1626240)
NBDXE.Entry(16FA110)
TSEG Base: 3f800000
GCD: AddMemSpace B=3F800000, L=800000, i=0, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=3F800000, L=800000, i=0, S=EFI_SUCCESS
GCD: AddMemSpace B=FEE00000, L=100000, i=1, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEE00000, L=100000, i=1, S=EFI_SUCCESS
GCD: AddMemSpace B=FEB00000, L=100000, i=2, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEB00000, L=100000, i=2, S=EFI_SUCCESS
GCD: AddMemSpace B=FEA00000, L=20, i=3, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEA00000, L=20, i=3, S=EFI_SUCCESS
GCD: AddMemSpace B=FE800000, L=200000, i=4, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FE800000, L=200000, i=4, S=EFI_SUCCESS
GCD: AddMemSpace B=FE000000, L=800000, i=5, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FE000000, L=800000, i=5, S=EFI_SUCCESS
GCD: AddMemSpace B=FD000000, L=1000000, i=6, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FD000000, L=1000000, i=6, S=EFI_SUCCESS
GCD: AddMemSpace B=FC000000, L=1000000, i=7, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FC000000, L=1000000, i=7, S=EFI_SUCCESS
GCD: AddMemSpace B=FBFFE000, L=2000, i=8, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FBFFE000, L=2000, i=8, S=EFI_SUCCESS
GCD: AddMemSpace B=D0000000, L=10000000, i=9, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=D0000000, L=10000000, i=9, S=EFI_SUCCESS
GCD: AddI/OSpace B=CF8, L=8, i=10, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=CF8, L=8, i=10, S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000000 B=3F800000, L=800000, i=0, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEE00000, L=100000, i=1, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEB00000, L=100000, i=2, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEA00000, L=20, i=3, S=EFI_UNSUPPORTED
GCD: SpaceAttr A=1 B=FE800000, L=200000, i=4, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FE000000, L=800000, i=5, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FD000000, L=1000000, i=6, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FC000000, L=1000000, i=7, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FBFFE000, L=2000, i=8, S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000001 B=D0000000, L=10000000, i=9, S=EFI_SUCCESS
Initializing NTB for IIO 0
Port 0:3 Active. Max Link Width = 4
Port 0:4 Active. Max Link Width = 4
Port 0:5 Active. Max Link Width = 8
Max Link Width changed. Retraining port
NB NUMA get System Mem Map HOB error !
TSEG Address 3f800000.
TSEG size 800000.
Creating Memory Data for SMBIOS.
--DIMM Speed = 1067 MHz
--Array[0] Device[2] Size = 1024 MB
LegacyInterrupt.Entry(16EA380)
LegacyRegion.Entry(16F1550)
VTdDXE.Entry(1705210)
ERROR: VTdDXE.Entry(1705210)=EFI_UNSUPPORTED
SMBiosBoard.Entry(17093F0)
OEMDXE.Entry(170C2F0)
SBDXE.Entry(172D2A0)
GCD: AddMemSpace B=FF000000, L=1000000, i=0, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FF000000, L=1000000, i=0, S=EFI_SUCCESS
GCD: AddMemSpace B=FED1C000, L=4000, i=1, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FED1C000, L=4000, i=1, S=EFI_SUCCESS
GCD: AddMemSpace B=FED00000, L=4000, i=2, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FED00000, L=4000, i=2, S=EFI_SUCCESS
GCD: AddMemSpace B=FEC00000, L=100000, i=3, S=EFI_ACCESS_DENIED
GCD: AllocMemSpace B=FEC00000, L=100000, i=3, S=EFI_SUCCESS
GCD: AddI/OSpace B=400, L=80, i=4, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=400, L=80, i=4, S=EFI_SUCCESS
GCD: AddI/OSpace B=500, L=80, i=5, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=500, L=80, i=5, S=EFI_SUCCESS
GCD: AddI/OSpace B=1180, L=20, i=6, S=EFI_ACCESS_DENIED
GCD: AllocI/OSpace B=1180, L=20, i=6, S=EFI_SUCCESS
GCD: SpaceAttr (UC ALL) B=FEC00000; L=1400000;
GCD:(UC ALL) setting B=FEC00000, L=104000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FED04000, L=18000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FED1C000, L=4000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FED20000, L=E0000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) skipping B=FEE00000, L=100000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FEF00000, L=100000, A=1; S=EFI_SUCCESS
GCD:(UC ALL) setting B=FF000000, L=1000000, A=1; S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000001 B=FF000000, L=1000000, i=0, S=EFI_SUCCESS
GCD: SpaceAttr A=8000000000000001 B=FED1C000, L=4000, i=1, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FED00000, L=4000, i=2, S=EFI_SUCCESS
GCD: SpaceAttr A=1 B=FEC00000, L=100000, i=3, S=EFI_SUCCESS
HPET: FED1F404 = 80
HPET LocateProtocol(ACPISupport)- EFI_SUCCESS Success
ACPI: SetAcpiTable() Table=0x1706D18; Handle=0x17392E8; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
ACPISupport.SetAcpiTable() = EFI_SUCCESS
MEPlatformDXE.Entry(1742780)
HECIDXE.Entry(17282E0)
MeCore.Entry(174A380)
BiosExtension.Entry(174CCF0)
FileSystem.Entry(17536F0)
PciBus.Entry(17CC4A0)
SBIDE.Entry(17AFCC0)
SBAHCI.Entry(17B5D90)
AHCI.Entry(17E42A0)
AINT13.Entry(17A8280)
AMITSE.Entry(18255C8)
CSMCORE.Entry(1846C60)
BIOSBLKIO.Entry(1812760)
CsmVideo.Entry(18172A0)
Terminal.Entry(18C3780)
SMBios64.Entry(18D9CD0)
SmmBase.Entry(18E0050)
SMM.SmmDispatcher.Entry(3F81A310)
SMM.Runtime.Entry(3F822AE0)
SmmChildDispatcher.Entry(1D3A8F0)
SMM.SmmChildDispatcher.Entry(3F8378F0)
AhciSmm.Entry(1D476B0)
SMM.AhciSmm.Entry(3F83E6B0)
ERROR: AhciSmm.Entry(3F83E6B0)=EFI_NOT_FOUND
ERROR: AhciSmm.Entry(1D476B0)=EFI_NOT_FOUND
SmbiosElog.Entry(3F1F6320)
SmmRuntime.Entry(3F1C0310)
SMM.SmmRuntime.Entry(3F83D310)
SMM.SmbiosElog.Entry(3F844320)
MicrocodeUpdate.Entry(1D59260)
SMM.MicrocodeUpdate.Entry(3F84A260)
SBSMI.Entry(1D66350)
SMM.SBSMI.Entry(3F852350)
AcpiModeEnable.Entry(1D6F940)
SMM.AcpiModeEnable.Entry(3F856940)
GenericElog.Entry(3F1B3260)
SMM.GenericElog.Entry(3F85B260)
RtErrorLog.Entry(3F1AD4B0)
SMM.RtErrorLog.Entry(3F85E4B0)
RtErrorLogging Disabled.
SMIFlash.Entry(1D7EC40)
SMM.SMIFlash.Entry(3F864C40)
SmiFlash: Flash Protocol 3F830EB0
PowerButton.Entry(1D85380)
SMM.PowerButton.Entry(3F868380)
UHCD.Entry(1DC22A0)
SleepSmi.Entry(1D8A290)
SMM.SleepSmi.Entry(3F86B290)
DataHubErrorCollector.Entry(1D8C390)
SmbiosDMIEdit.Entry(1DDB630)
SMM.SmbiosDMIEdit.Entry(3F86D630)
USBRT.Entry(1E1A2A0)
SMM.USBRT.Entry(3F8742A0)
USBINT13.Entry(1DFE2A0)
Driver 4a37320b-3fb3-4365-9730-9e89c600395d was discovered but not loaded!!
Driver c253ed0a-c48b-4ee3-a65e-75f61f3ad251 was discovered but not loaded!!
Driver 511d0266-f2e0-4df8-ae3a-fdb98523bfb9 was discovered but not loaded!!
Driver 899407d7-99fe-43d8-9a21-79ec328cac21 was discovered but not loaded!!
AMI PCI Bus Driver.Start(17DD470)=Rb[0]: Bus _MIN=0x0; _MAX=0x4; _LEN=0x5
Rb[0]: Allocating IO: Bottom Up; Granularity = 0xfff; Memory Size = 0x1100
-- Searching IO Map
-- Allocated range = 0x2000 - 0x30ff
Rb[0]: Allocating 32-bit MMIO: AddressLimit = 0xfc000000; Granularity =
0xfffff; Memory Size = 0x14a000
--Setting UC attributes.
-- Allocated range = 0xfbe00000 - 0xfbf49fff
Rb[0]: Allocating 32-bit MMIO: AddressLimit = 0xfc000000; Granularity =
0xfffff; Memory Size = 0x110000
--Prefetchable Memory: Setting WT attributes. --
Failed(EFI_UNSUPPORTED). Setting to UC.
-- Allocated range = 0xfbc00000 - 0xfbd0ffff
Rb[0]: Lowest 32bit MMIO Allocated = 0xf8000000
PciRb: HbNotifyCspEndResourceAllocation...
PciRb: Triggering PCIe Error Logging Callback...
PCI Bus, Device, function = 0, 0,0
Root Bridge 0 Bus #: 0
Max Bus #: 255
PCI Bus 17 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 18 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 19 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 20 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 21 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 22 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 23 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 24 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 0 ---> 0
PCI Bus 3 ---> 1
PCI Bus 4 ---> 2
PCI Bus 5 ---> 3
PCI Bus 6 ---> P2P bridge entry not found in BusNumXlat table, entry suppressed.
PCI Bus 128 ---> 0
PCI Bus 129 ---> 0
PCI Bus 131 ---> 1
PCI Bus 132 ---> 2
PCI Bus 133 ---> 3
PCI Bus 134 ---> P2P bridge entry not found in BusNumXlat table, entry
suppressed.
PCI Bus 25 ---> 4
Finished updating BusNumXlat table, 0 entries remaining.
$PIR table:
0 f8 62 dc78 63 dc78 62 dc78 0 0 0
0 e8 6b dcf8 63 dc78 60 dcf8 62 dc78 0
0 d0 60 dcf8 69 dcf8 62 dc78 63 dc78 0
0 d8 6a dcf8 0 0 0 0 0 0 0
0 c8 68 dcf8 0 0 0 0 0 0 0
0 b0 60 dcf8 61 dcf8 62 dc78 0 0 0
0 e0 61 dcf8 60 dcf8 62 dc78 63 dc78 0
0 0 60 dcf8 0 0 0 0 0 0 0
0 18 60 dcf8 0 0 0 0 0 0 0
0 20 60 dcf8 0 0 0 0 0 0 0
0 28 60 dcf8 0 0 0 0 0 0 0
0 30 60 dcf8 0 0 0 0 0 0 0
0 50 60 dcf8 61 dcf8 62 dc78 63 dc78 0
1 0 60 dcf8 61 dcf8 62 dc78 63 dc78 3
2 0 60 dcf8 61 dcf8 62 dc78 63 dc78 4
3 0 60 dcf8 61 dcf8 62 dc78 63 dc78 5
0 0 60 dcf8 0 0 0 0 0 0 0
0 18 60 dcf8 0 0 0 0 0 0 0
0 20 60 dcf8 0 0 0 0 0 0 0
0 28 60 dcf8 0 0 0 0 0 0 0
0 30 60 dcf8 0 0 0 0 0 0 0
0 50 60 dcf8 61 dcf8 62 dc78 63 dc78 0
0 0 60 dcf8 61 dcf8 62 dc78 63 dc78 11
1 0 60 dcf8 61 dcf8 62 dc78 63 dc78 13
2 0 60 dcf8 61 dcf8 62 dc78 63 dc78 14
3 0 60 dcf8 61 dcf8 62 dc78 63 dc78 15
4 0 60 dcf8 61 dcf8 62 dc78 63 dc78 21
0 0 0 0 0 0 0 0 0 0 0
PCI device: 0 3 0 ... P2P bridge.
AddonPciBusTable entry [0] created: Bus 1, PIRQs: 60 0 0 0
Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 0....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D3/F0
PCI device: 1 0 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B1/D0/F0
PCI device: 0 4 0 ... P2P bridge.
AddonPciBusTable entry [1] created: Bus 2, PIRQs: 60 0 0 0
Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D4/F0
PCI device: 0 5 0 ... P2P bridge.
AddonPciBusTable entry [2] created: Bus 3, PIRQs: 60 0 0 0
Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D5/F0
PCI device: 3 0 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B3/D0/F0
PCI device: 3 0 1 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 1....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 1 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B3/D0/F1
PCI device: 0 8 0 ... does not require IRQ.
PCI device: 0 8 1 ... does not require IRQ.
PCI device: 0 8 2 ... does not require IRQ.
PCI device: 0 8 3 ... does not require IRQ.
PCI device: 0 9 0 ... does not require IRQ.
PCI device: 0 a 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F0
PCI device: 0 a 1 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[1] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 1 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F1
PCI device: 0 a 2 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2387....f3ff....
irq_priority_index 2....
irq_priority_index 3....
irq_priority_index 4....
irq_priority_index 5....
irq_priority_index 6....
irq_priority_index 7....
irq_priority_index 8....
irq_priority_index 0....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 2 IRQ b mask dc78
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F2
PCI device: 0 a 3 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2387....f3ff....
irq_priority_index 1....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F3
PCI device: 0 a 4 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F4
PCI device: 0 a 5 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[1] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 1 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F5
PCI device: 0 a 6 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[2] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 2 IRQ b mask dc78
Ready to install interrupt handler for IRQ11 for PCI B0/D10/F6
PCI device: 0 a 7 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[3] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D10/F7
PCI device: 0 b 0 ... does not require IRQ.
PCI device: 0 10 0 ... does not require IRQ.
PCI device: 0 10 1 ... does not require IRQ.
PCI device: 0 11 0 ... does not require IRQ.
PCI device: 0 16 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D22/F0
PCI device: 0 19 0 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 2....
irq_priority_index 3....
irq_priority_index 4....
irq_priority_index 5....
irq_priority_index 6....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 4 IRQ 7 mask dcf8
Ready to install interrupt handler for IRQ7 for PCI B0/D25/F0
PCI device: 0 1a 0 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[0] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 0 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D26/F0
PCI device: 0 1b 0 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 7....
irq_priority_index 8....
irq_priority_index 0....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 6 IRQ b mask dcf8
Ready to install interrupt handler for IRQ11 for PCI B0/D27/F0
PCI device: 0 1d 0 ... Intx2Pirq returns EFI_SUCCESS
..........IRQ MASK 2307....f37f....
irq_priority_index 1....
RoutePciIrq status: EFI_SUCCESS, Intx2Pirq: Int 7 IRQ a mask dcf8
Ready to install interrupt handler for IRQ10 for PCI B0/D29/F0
PCI device: 0 1e 0 ... P2P bridge.
does not require IRQ.
PCI device: 0 1f 0 ... does not require IRQ.
PCI device: 0 1f 2 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[3] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D31/F2
PCI device: 0 1f 3 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[2] is already programmed to IRQb. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 2 IRQ b mask dc78
Ready to install interrupt handler for IRQ11 for PCI B0/D31/F3
PCI device: 0 1f 5 ... Intx2Pirq returns EFI_SUCCESS
The requested PIRQ[3] is already programmed to IRQa. PCI Routing ABORTED.
RoutePciIrq status: EFI_ABORTED, Intx2Pirq: Int 3 IRQ a mask dc78
Ready to install interrupt handler for IRQ10 for PCI B0/D31/F5
EFI_SUCCESS
Pci.Header.ClassCode[1] = 1, Pci.Header.ClassCode[2] = 6
AMI Generic LPC Super I/O Driver.Start(3F649480)=
SIO[0] Starting: SIO: Updating ISA_DMA_MASK = 0xF37F with 0x4 for Chnl 2
InitSioDev()=EFI_SUCCESS; SIO[1] Starting: InitSioDev()=EFI_SUCCESS; SIO[2]
Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
RDP; StartSioDev()=EFI_SUCCESS; Hnd=1E16C18;
EFI_SUCCESS
AMI Serial I/O Driver.Start(18C5B58)EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=ACPI: SetAcpiTable() Table=0x1E17E18;
Handle=0x18C9350; *Handle=0x0
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=[2J[1;1HEFI_SUCCESS
AMI Generic LPC Super I/O Driver.Start(3F649480)=
SIO[0] Starting: InitSioDev()=EFI_SUCCESS; SIO[1] Starting:
InitSioDev()=EFI_SUCCESS; SIO[2] Starting: InitSioDev()=EFI_SUCCESS; SIO[3]
Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
RDP; StartSioDev()=EFI_SUCCESS; Hnd=1E47F18;
EFI_SUCCESS
AMI Serial I/O Driver.Start(18C5B58)=EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
[25;78H98[1;1HUHCD.Start(1DC3410)=[25;78H9D[1;1HEFI_SUCCESS
USB bus.Start(1DCBA00)=EFI_SUCCESS
UHCD.Start(1DC3410)=EFI_SUCCESS
USB
bus.Start(1DCBA00)=[25;78H9C[1;1H[25;78HB4[1;1H[25;78HB4[1;1HEFI_SUCCESS
AMI Generic LPC Super I/O Driver.Start(3F649480)=[25;78H99[1;1H
SIO[0] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4DB18;
SIO[1] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4D998;
SIO[2] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E16C18;
SIO[3] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E47F18;
SIO[4] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4D398;
SIO[5] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4D098;
SIO[6] Starting: InitSioDev()=EFI_SUCCESS;
InstallProt()=EFI_SUCCESS.Open(PciIo)=EFI_SUCCESS
StartSioDev()=EFI_SUCCESS; Hnd=1E4FC98;
SIO[7] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[8] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[9] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[10] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[11] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[12] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[13] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[14] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
EFI_SUCCESS
AMI PS/2 Driver.Start(3F63F060)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
AMI PS/2 Driver.Start(3F63F060)=EFI_SUCCESS
AMI PCI Bus Driver.Start(17DD470)=[25;78H92[1;1HEFI_ALREADY_STARTED
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 8
Pci.Header.ClassCode[1] = 80, Pci.Header.ClassCode[2] = 7
Pci.Header.ClassCode[1] = 0, Pci.Header.ClassCode[2] = 2
Pci.Header.ClassCode[1] = 3, Pci.Header.ClassCode[2] = 4
Pci.Header.ClassCode[1] = 4, Pci.Header.ClassCode[2] = 6
AMI Generic LPC Super I/O Driver.Start(3F649480)=[25;78H99[1;1H
SIO[0] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4DB18;
SIO[1] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4D998;
SIO[2] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E16C18;
SIO[3] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E47F18;
SIO[4] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4D398;
SIO[5] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4D098;
SIO[6] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=1E4FC98;
SIO[7] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[8] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[9] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[10] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[11] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[12] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[13] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
SIO[14] Starting: InitSioDev()=EFI_SUCCESS; StartSioDev()=EFI_ALREADY_STARTED;
Hnd=0;
EFI_SUCCESS
AMI Serial I/O Driver.Start(18C5B58)=EFI_UNSUPPORTED
AMI Serial I/O Driver.Start(18C5B58)=EFI_UNSUPPORTED
Pci.Header.ClassCode[1] = 1, Pci.Header.ClassCode[2] = 1
FOUND MASS STORAGE CONTROLLER: 8086 3b20
BIOSBLKIO.Start(1812BB0)=EFI_UNSUPPORTED
SBIDE.Start(17AFF80)=EFI_SUCCESS
AMI IDE BUS
Driver.Start(3F676830)=[25;78HA0[1;1H[25;78HA2[1;1H[25;78HA3[1;1HEFI_SUCCESS
AMI Disk I/O Driver.Start(3F643E70)=EFI_SUCCESS
FileSystem.Start(1753A00)=EFI_SUCCESS
AMI Partition Driver.Start(3F63F660)=EFI_SUCCESS
AMI Disk I/O Driver.Start(3F643E70)=EFI_SUCCESS
FileSystem.Start(1753A00)=EFI_SUCCESS
AMI Partition Driver.Start(3F63F660)=EFI_INVALID_PARAMETER
Pci.Header.ClassCode[1] = 5, Pci.Header.ClassCode[2] = c
SBDXE.Start(1731320)=EFI_SUCCESS
Pci.Header.ClassCode[1] = 1, Pci.Header.ClassCode[2] = 1
FOUND MASS STORAGE CONTROLLER: 8086 3b26
BIOSBLKIO.Start(1812BB0)=EFI_UNSUPPORTED
SBIDE.Start(17AFF80)=EFI_SUCCESS
AMI IDE BUS
Driver.Start(3F676830)=[25;78HA0[1;1H[25;78HA2[1;1H[25;78HA3[1;1HEFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
AMI Generic LPC Super I/O Driver.Stop=
GenericSIOStop: NumberOfChildren=0x1, Controller=0x1E13498
SIO[0] Stopping: Closing(PciIo)=EFI_SUCCESS; Uninstalling(AmiSio;
DP)=EFI_SUCCESS; EFI_SUCCESS.
EFI_SUCCESS
[25;78HB2[1;1HOptionROM for B0/D19/F0 is executed from 7100:0003
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=ACPI: SetAcpiTable() Table=0x1E47118;
Handle=0x18C9350; *Handle=0x1E17D98
ACPI: SetAcpiTable() Hnd!=0, Removing Tbl. Ver=0xE, TblNum=0x7 Status =
EFI_SUCCESS
ACPI: Cant't Delete Tble From Storage: Status = EFI_SUCCESS
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=[2J[1;1H
B2[1;1HEFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
0 19 0..NewRomSize = 1000
FetchBbsBootDevices: B0/D19/F0, ClassCode 2
PCI OPROM(handle 1e13e98, 0/19/0): addr c0000, size 1000
CsmBsp: Installing service ROM, 191ae40...[25;78HB2[1;1HOptionROM for
B0/D0/F0 is executed from c100:0003
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Stop=AMI Console Splitter Driver.Stop=EFI_SUCCESS
EFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=ACPI: SetAcpiTable() Table=0x1E6BA18;
Handle=0x18C9350; *Handle=0x1E47298
ACPI: SetAcpiTable() Hnd!=0, Removing Tbl. Ver=0xE, TblNum=0x7 Status =
EFI_SUCCESS
ACPI: Cant't Delete Tble From Storage: Status = EFI_SUCCESS
ACPI: SetAcpiTable() Exiting... Status = EFI_SUCCESS
EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=[2J[1;1H
B2[1;1HEFI_SUCCESS
AMI Terminal Driver.Start(18C4344)=EFI_SUCCESS
AMI Console Splitter Driver.Start(3F640E20)=EFI_SUCCESS
0 0 0..NewRomSize = 1000
FetchBbsBootDevices: B0/D0/F0, ClassCode 1
PCI OPROM(handle 0, 0/0/0): addr c1000, size 1000
...OK, size 7800
Setup.Entry(1FC5FF0)
[0;37;40m[2J[1;37;40m[1;1HVersion 2.00.1201. Copyright (C) 2009 American
Megatrends, Inc. [2;1HEVALUATION COPY.
[3;1HPress <DEL> or <F2> to enter
setup. IN Collect AML Info: 0
IN Collect AML Info after PT: 0
[2JShellSource.Entry(225412C)
[0;37;40m[1;33;40mEFI Shell version 2.00 [4.637]
[0;37;40mCurrent running mode [1;37;40m1.1.2[0;37;40m
[1;33;40mDevice mapping table[0;37;40m
[1;33;40mblk0[0;37;40m :HardDisk - [1;37;40mAlias[0;37;40m
[1;33;40m(null)[0;37;40m
[1;33;40m [0;37;40m
Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Secondary,Master)/HD(Part1,SigE3F554B0)
[1;33;40mblk1[0;37;40m :BlockDevice - [1;37;40mAlias[0;37;40m
[1;33;40m(null)[0;37;40m
[1;33;40m [0;37;40m Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Secondary,Master)
Press [1;37;40mESC[0;37;40m in 5 seconds to skip
[1;33;40mstartup.nsh[0;37;40m, any other key to continue.
Press [1;37;40mESC[0;37;40m in 4 seconds to skip
[1;33;40mstartup.nsh[0;37;40m, any other key to continue.
[10;1H[1;33;40mShell> exit[10;12H[0;37;40m
[2J
[2J[1;37;40m[2JIN Collect AML Info: 0
IN Collect AML Info after PT: 0
[2J[2J_____BBS_TABLE_____
#03: 0 00/1F/02 1 1 2 3F710000 handle: 1e53418 0, PATA: SILICONSYSTEMS INC 2GB
Handle=1e53418, HandleProtocol status: EFI_SUCCESS, DevicePath: 1e53618
#17: 1 00/19/00 2 0 6 3F710000 handle: 0 0, IBA GE Slot 00C8 v1335
>> NetBSD/x86 BIOS Boot, Revision 5.2 (from NetBSD 5.0.2)
>> Memory: 635/1031648 k
1. Boot normally netbsd.ok
2. Boot normally
3. Boot single user
4. Disable ACPI
5. Disable ACPI and SMP
6. Drop to boot prompt
Choose an option; RETURN for default; SPACE to stop countdown.
Option 1 will be chosen in 5 4 0
type "?" or "help" for help.
> boot netbsd.gnana
booting hd0a:netbsd.gnana
|/-\|/-17398480\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+12602604-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+2162728\|
[873504/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+1130166|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/]=0x2097390
kernel text is mapped with 4 large pages and 409 normal pages
Loaded initial symtab at 0xc1fadd14, strtab at 0xc20834d8, # entries 54575
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0_STABLE (PHOENIX) #6: Tue Dec 21 14:46:08 IST 2010
lgnanasekar@saraswati:/work/sw/lgnanasekar/nv-client/SW-NetBSD5/usr/src/sys/arch/i386/compile/PHOENIX
total memory = 1009 MB
avail memory = 959 MB
sysctl_createv: sysctl_locate(tcpctl_mib2_group) returned 2
sysctl_createv: sysctl_locate(tcpctl_mib2_exaxt_conn_entry) returned 2
sysctl_createv: sysctl_locate(tcpctl_mib2_next_conn_entry) returned 2
sysctl_createv: sysctl_create(ip0) returned 17
sysctl_createv: sysctl_create(ip1) returned 17
sysctl_createv: sysctl_create(ip2) returned 17
To be filled by O.E.M. To be filled by O.E.M. (To be filled by O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1733MHz, id 0x106e4
cpu1 at mainbus0 apid 1: Intel 686-class, 1733MHz, id 0x106e4
ioapic0 at mainbus0 apid 0
ioapic1 at mainbus0 apid 2
acpi0 at mainbus0: Intel ACPICA 20080321
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
com3 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com3: console
com4 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
com4: ns16550a, working fifo
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
nbsd_kbde_match invoked
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x370a (rev. 0x10)
nbsd_kbde_match invoked
ppb0 at pci0 dev 3 function 0: vendor 0x8086 product 0x3721 (rev. 0x10)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
nbsd_kbde_match invoked
nbsd_kbde0 at pci1 dev 0 function 0nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x1
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xb
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47173 and revision 3
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FBE00004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfbe00004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:CCD70000 TAG:0x1 ADDR:FBE00000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xccd70000)
INT REG:0000010b
enter :kbde_dmamem_alloc
BCM Bus Space mem Handle = 0xc1426300
_dma_pbase = 0x3800000
kva=0xccdb0000/0x800000,map=0xc34c5900,nsegs=1,pa=3800000/800000
DMA VBASE:0xccdb0000 DMA PBASE:3800000
nbsd_kbde_match invoked
ppb1 at pci0 dev 4 function 0: vendor 0x8086 product 0x3722 (rev. 0x10)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
nbsd_kbde_match invoked
ppb2 at pci0 dev 5 function 0: vendor 0x8086 product 0x3723 (rev. 0x10)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
nbsd_kbde_match invoked
vendor 0x8086 product 0x10d8 (ethernet network, revision 0x01) at pci3 dev 0
function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x10d8 (ethernet network, revision 0x01) at pci3 dev 0
function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3728 (miscellaneous system, revision 0x10) at pci0 dev
8 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3729 (miscellaneous system, revision 0x10) at pci0 dev
8 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372a (miscellaneous system, revision 0x10) at pci0 dev
8 function 2 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372b (miscellaneous system, revision 0x10) at pci0 dev
8 function 3 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x372c (miscellaneous system) at pci0 dev 9 function 0
not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3718 (miscellaneous system, revision 0x10) at pci0 dev
10 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3719 (miscellaneous system, revision 0x10) at pci0 dev
10 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3712 (miscellaneous system, revision 0x10) at pci0 dev
10 function 2 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3713 (miscellaneous system, revision 0x10) at pci0 dev
10 function 3 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3714 (miscellaneous system, revision 0x10) at pci0 dev
10 function 4 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3715 (miscellaneous system, revision 0x10) at pci0 dev
10 function 5 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3716 (miscellaneous system, revision 0x10) at pci0 dev
10 function 6 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x3717 (miscellaneous system, revision 0x10) at pci0 dev
10 function 7 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x373f (interrupt system, interface 0x20, revision 0x10)
at pci0 dev 11 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371a (miscellaneous system, revision 0x10) at pci0 dev
16 function 0 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371b (miscellaneous system, revision 0x10) at pci0 dev
16 function 1 not configured
nbsd_kbde_match invoked
vendor 0x8086 product 0x371d (miscellaneous system, revision 0x10) at pci0 dev
17 function 0 not configured
nbsd_kbde_match invoked
wm0 at pci0 dev 25 function 0: PCH LAN (82578DM) Controller, rev. 5
wm0: interrupting at ioapic0 pin 20
wm0: Ethernet address 88:88:88:88:87:88
ukphy0 at wm0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
nbsd_kbde_match invoked
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
usb0 at ehci0: USB revision 2.0
nbsd_kbde_match invoked
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x3b56 (rev. 5), HDA rev. 1.0
azalia0: No HD-Audio codecs
azalia0: initialization failure
nbsd_kbde_match invoked
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
usb1 at ehci1: USB revision 2.0
nbsd_kbde_match invoked
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci4 at ppb3 bus 4
nbsd_kbde_match invoked
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x3b14 (rev. 0x05)
nbsd_kbde_match invoked
piixide0 at pci0 dev 31 function 2
piixide0: Intel 3400 Serial ATA Controller (rev. 0x05)
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
nbsd_kbde_match invoked
vendor 0x8086 product 0x3b30 (SMBus serial bus, revision 0x05) at pci0 dev 31
function 3 not configured
nbsd_kbde_match invoked
piixide1 at pci0 dev 31 function 5
piixide1: Intel 3400 Serial ATA Controller (rev. 0x05)
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
atabus3 at piixide1 channel 1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
uhub0 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2
uhub3: single transaction translator
wd0 at atabus1 drive 0: <SILICONSYSTEMS INC 2GB>
wd0: 2001 MB, 4066 cyl, 16 head, 63 sec, 512 bytes/sect x 4098528 sectors
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Too many symbols for tree, skipping 21808 symbols
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
bcnp pseduo-device
bcmw pseduo-device
bcmwstk pseduo-device
bcmws pseduo-device
bshell pseudo-device
Searching for RAID components...
boot device: wd0
root on md0a dumps on md0b
dump_misc_init: max_paddr = 0x3f800000
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying coda...
no file system for md0 (dev 0x1100)
cannot mount root, error = 79
root device (default md0a):
dump device (default md0b): wd0a
file system (default generic):
root on md0a dumps on wd0a
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying coda...
no file system for md0 (dev 0x1100)
cannot mount root, error = 79
root device (default md0a):
dump device (default md0b):
file system (default generic):
root on md0a dumps on md0b
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying coda...
no file system for md0 (dev 0x1100)
cannot mount root, error = 79
root device (default md0a):
dump device (default md0b):
file system (default generic):
root on md0a dumps on md0b
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying coda...
no file system for md0 (dev 0x1100)
cannot mount root, error = 79
root device (default md0a):
dump device (default md0b):
file system (default generic):
root on md0a dumps on md0b
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying coda...
no file system for md0 (dev 0x1100)
cannot mount root, error = 79
root device (default md0a):
dump device (default md0b): wd0a
file system (default generic):
root on md0a dumps on wd0a
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying coda...
no file system for md0 (dev 0x1100)
cannot mount root, error = 79
root device (default md0a): wd0a
dump device (default wd0b):
file system (default generic):
root on wd0a dumps on wd0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
WARNING: clock lost 718 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init):
Enter pathname of shell or RETURN for /bin/sh:
CP CPU receiving excessive control plane traffic: will be rate controlled
[3g H H H H H H H
H H
Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root access.
/dev/wd0a: file system not clean (fs_clean=0); please fsck(8)
/dev/wd0a: lost blocks 0 files 0
#
#
#
#
#
#
#
#
#
#
# umass0 at uhub2 port 1 configuration 1 interface 0
umass0: JetFlash Mass Storage Device, rev 2.00/1.41, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <, TS2GJFV30, 8.07> disk removable
sd0: fabricating a geometry
sd0: 1959 MB, 1959 cyl, 64 head, 32 sec, 512 bytes/sect x 4014078 sectors
sd0: fabricating a geometry
umass0: at uhub2 port 1 (addr 3) disconnected
sd0: detached
scsibus0: detached
umass0: detached
#
# clear
[H[J# ls
.cshrc igmp netfpga.corrupt1
#
#
#
#
#
Home |
Main Index |
Thread Index |
Old Index