I have a Compaq Deskpro EP here running as a mail, nis and nfs server. But
since I inserted a new disk 3 weeks ago it has crashed on me twice...
It used to run like a clock, and have never crashed before...


Oct 16 07:24:10 mailserver /netbsd: wdc1(0): lost interrupt
Oct 16 07:24:10 mailserver /netbsd:     type: ata
Oct 16 07:24:10 mailserver /netbsd:     c_bcount: 8192
Oct 16 07:24:10 mailserver /netbsd:     c_skip: 0
Oct 16 07:24:29 mailserver /netbsd: wdc1(0): lost interrupt
Oct 16 07:24:29 mailserver /netbsd:     type: ata
Oct 16 07:24:29 mailserver /netbsd:     c_bcount: 7168
Oct 16 07:24:29 mailserver /netbsd:     c_skip: 1024
Oct 16 07:24:29 mailserver /netbsd: wdc1(0): wdcintr: timeout waiting for 
unbusy
Oct 16 07:25:19 mailserver /netbsd: wdc1(0): lost interrupt

And so on until it crashes...

Could I have misconfigured the hardware in this machine in some way, or may the 
IBM
disk I bought for it be "to new"? Would uppgrading to 1.4.1 be an option?


NetBSD 1.3.3 (GENERIC) #0: Fri Dec 11 16:21:49 PST 1998
    root@struis:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 6 model 5 step 2
cpu0: Intel Pentium Pro (686-class)
real mem  = 66711552
avail mem = 62836736
using 839 buffers containing 3436544 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
Intel product 0x7190 (host bridge, revision 0x03) at pci0 dev 0 function 0 not 
configured
ppb0 at pci0 dev 1 function 0: Intel product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
Matrox product 0x0521 (VGA display, revision 0x01) at pci1 dev 0 function 0 not 
configured
ahc1 at pci0 dev 13 function 0
ahc1: interrupting at irq 11
ahc1: aic7860 Single Channel, SCSI Id=7, 3 SCBs
scsibus0 at ahc1 channel 0: 8 targets
ahc1: target 3 synchronous at 10.0MHz, offset = 0xf
st0 at scsibus0 targ 3 lun 0: <HP, C1537A, L812> SCSI2 1/sequential removable
st0: drive empty
fxp0 at pci0 dev 14 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 7
fxp0: Ethernet address 00:90:27:a2:1e:6f
pcib0 at pci0 dev 20 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
Intel 82371AB IDE controller (PIIX4) (IDE mass storage, interface 0x80, 
revision 0x01) at pci0 dev 20 function 1 not configured
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at 
pci0 dev 20 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, 
revision 0x02) at pci0 dev 20 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <Maxtor 90430D3>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0: 4112MB, 8421840 sec, 512 bytes/sec
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
wd1 at wdc1 drive 0: <IBM-DTTA-371440>
wd1: using 16-sector 16-bit pio transfers, lba mode
wd1: 13783MB, 28229040 sec, 512 bytes/sec
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask c840 netmask c8c0 ttymask c8c2
WARNING: Disk appears to be old-NetBSD or FreeBSD.  See installboot(8).
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

-------------------------------------------------------
Christian Johansson
ISD Datasystem AB
BOX 135
s-182 12 DANDERYD
SWEDEN
http://www.isd.se email:cjn@isd.se
+46(0)8 7533100 (office) +46(0)708 422680 (mobile)
+46(0)8 7536279 (fax)
-------------------------------------------------------