I have made it through the kernel compile on a V1.1 i386 machine with
the May 25th tarballs (May 18th died on the pss.c use of ad1848 files
even though no sound drivers were selected in the config. I posted this
before but the responses I received did not fix my problem. I added
sound board support to the config file for the sound boards I don't have
and it works for now).

This new kernel works fine except that my /usr/src files are stored on a
nfs drive and nfs can't mount them because of a program version number
problem when using the V1.1B kernel with my V1.1 userland. (ie the mount
command for the nfs mount of /usr/src fails). Maybe I just need to add
an option to my nfs mounts to tell it about using older nfs or
something.

Anyway, I rebooted my V1.1 kernel and continued on with the V1.1B
userland rebuild and it has now died on:

===> libgcc
cc -O -I/usr/src/gnu/usr.bin/gcc/libgcc/../common
-I/usr/src/gnu/usr.bin/gcc/lib
gcc/../arch  -I/usr/src/gnu/usr.bin/gcc/libgcc/../arch/i386 -Werror  -c
-DL__gcc
_bcmp -o __gcc_bcmp.o /usr/src/gnu/usr.bin/gcc/libgcc/libgcc2.c
/usr/src/gnu/usr.bin/gcc/libgcc/libgcc2.c:76: no data type for mode `XF'
/usr/src/gnu/usr.bin/gcc/libgcc/libgcc2.c:82: unknown machine mode
`__word__'
*** Error code 1

Stop.
*** Error code 1


In order to get this far I had to rebuild "yacc" first as the %expect
command was not understood by the V1.1 yacc (it is used in the gcc
compile now) and I had to rebuild "tsort" as well as the "q" option was
not understood as well (it is also used in the gcc compile).

If I can get this all rebuilt I will post a shell script which will let
people who have a plain V1.1 system to try out the impending V1.2
snapshots. I have this script ready except for this problem.

Here is my file so far for rebuilding. Note that the kernel stuff is
commented out for now as that part is complete.

#
# i386_v1_1_v1_1b.sh - Upgrade a V1.1 i386 machine to V1.1b (May 25th
tars)
#
# Unofficial V1.1 to V1.1B (May 25th) upgrade script...
#
#
# Thought I would return the favour (favor in the US) for people trying
to
# upgrade a straight V1.1 (i386) machine to V1.1B (current) machine in
# prep. for the V1.2 release. Someone gave me this file when I was
trying to
# upgrade from V1.0 to the -current of the time. So please e-mail me any
# oddities you run into and I will keep reposting this until V1.2 is
out.
#
# This procedure has been used to upgrade a raw V1.1 i386 machine,
# without any patches, to a V1.1B machine as of the May 25th tar
# files. Earlier, trying with the V1.1B tar files of May 18th,
# and without any sound boards in the config file, it died on
# an error where pss.c (pss.o) was referring to symbols for a
# particular sound chip even though I had no sound boards in my
# config. This was during the link of the kernel. The compile worked
# fine. I added sound boards to the config file and the kernel
# built fine. If someone knows why this is please e-mail me.
#
# P.S. If your src directory is nfs mounted you may have to boot your
old
# kernel to continue as mine was not mounting and complaining of a
program
# version problem. Maybe something to do with V3 NFS ? After confirming
my
# new V1.1B kernel worked I just rebooted the original V1.1 and
continued
# to build V1.1B over NFS like that.
#
# Scott.Burns@Labatt.Com
# Scott.Burns@Netcontech.Com
#
#
#(cd /usr/src/usr.sbin/config ; make && make install && make cleandir)

#(cd /usr/src/gnu/usr.bin/gas ; make && make install && make cleandir)

#(cd /sys/arch/i386/conf ; config NCTI20_V1_2)
#(cd /sys/arch/i386/compile/NCTI20_V1_2 ; make depend && make)
# copy  new kernel to /, and boot off it

#(cd /usr/src/share/mk ; make install)
#
# Rebuild yacc first or the yacc from v1.1 dies on Error Code 1 when
# it hits %expect 34 in /usr/src/gnu/gcc/common/c-parse.y. The
# new yacc included with V1.1B handles it so build and install it
# before it gets used in the gcc building.
#
#(cd /usr/src/usr.bin/yacc; make && make install && make cleandir)
#
# Rebuild tsort first of the tsort from v1.1 dies on Error Code 1 when
# it hits a Make in the gcc build that uses a new "q" option. The
# new tsort included with V1.1B handles it so build and install it
# before it gets used in the gcc building.
#
#(cd /usr/src/usr.bin/tsort; make && make install && make cleandir)
#
# gcc directory was gcc2 ununder v1.1, now it's just gcc.
#
(cd /usr/src/gnu/usr.bin/gcc ; make && make install && make cleandir)

(cd /usr/src/bin/sh ; make && make install &&  make cleandir)

(cd /usr/src/include ; make && make install)
(cd /usr/src/gnu/usr.bin/ld ; make && make install && make cleandir)
(cd /usr/src/lib ; make && make install && make cleandir)

(cd /usr/src/bin ; make && make install && make cleandir)
(cd /usr/src/sbin ; make && make install && make cleandir)
#
# This mkdir was for a bug when going from V1.0 to V1.1, it is probably
# fixed with production V1.1
#
mkdir /usr/share/doc/usd/13.viref

(cd /usr/src/usr.bin ; make && make install && make cleandir)
(cd /usr/src/usr.sbin ; make && make install && make cleandir)
(cd /usr/src/libexec ; make && make install && make cleandir)
(cd /usr/src/gnu ; make && make install && make cleandir)
(cd /usr/src/share ; make && make install && make cleandir)
#
# If you have the time for games ;-)
#
# (cd /usr/src/games ; make && make install && make cleandir)


Any ideas ?

scott
scott.burns@labatt.com
scott.burns@netcontech.com