--==_Exmh_671539170P
Content-Type: text/plain; charset=us-ascii

In message <199609031009.FAA04871@expert.cc.purdue.edu>you write:
> I am having even worse problems with a DRM-602X.  It's a 6-disc SCSI-2

While we're at it I am having problems with either the generic "cd" driver
or the ahc code, if I' get an error on one of my cd's which is quite often,
I cannot use the drive thereafter, all the kernel reports is i/o-error.
It is not the hardware, because the Pioneer does read from the other LUNs 
even if one LUN faulted and is no more accessible.


NetBSD 1.2_BETA (ZIPPIFW) #7: Mon Aug 26 22:47:56 MET DST 1996
    root@zippo:/usr/src/Original/src/sys/arch/i386/compile/ZIPPIFW
CPU: Pentium (GenuineIntel 586-class CPU)
real mem  = 49938432
avail mem = 44621824
[...]
pci0 at mainbus0 bus 0: configuration mode 1
vendor 0x8086 product 0x122d (class bridge, subclass host, revision 0x02) at pci0 dev 0 function 0 not configured
vendor 0x8086 product 0x122e (class bridge, subclass ISA, revision 0x02) at pci0 dev 7 function 0 not configured
ahc0 at pci0 dev 9 function 0
ahc0: BurstLen = 8DWDs, Latency Timer = 32PCLKS
ahc0: interrupting at irq 9
ahc0: Reading SEEPROM...done.
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc0: Reseting Channel A
ahc0: Downloading Sequencer Program...Done
scsibus0 at ahc0
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
[...]
ahc0: target 6 synchronous at 5.0MHz, offset = 0xc
cd0 at scsibus0 targ 6 lun 0: <NEC, CD-ROM DRIVE:500, 2.5> SCSI2 5/cdrom removable

ep0 at pci0 dev 10 function 0: 3Com 3C590 Ethernet
ep0: aui/bnc/utp address 00:20:af:f9:a4:1d
ep0: interrupting at irq 9
vendor 0x5333 product 0x8811 (class display, subclass VGA, revision 0x40) at pci0 dev 11 function 0 not configured
ahc1 at pci0 dev 12 function 0
ahc1: BurstLen = 8DWDs, Latency Timer = 32PCLKS
ahc1: interrupting at irq 12
ahc1: Reading SEEPROM...done.
ahc1: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc1: Reseting Channel A
ahc1: Downloading Sequencer Program...Done
scsibus1 at ahc1
probe(ahc1:4:0): Target Busy
probe(ahc1:4:0): Target Busy
st0 at scsibus1 targ 4 lun 0: <EXABYTE, EXB-8200, 425A> SCSI1 1/sequential removable
ahc1:A:5: refuses syncronous negotiation.  Using asyncronous transfers
cd1 at scsibus1 targ 5 lun 0: <PIONEER, CD-ROM DRM-624X, 1.03> SCSI2 5/cdrom removable
cd2 at scsibus1 targ 5 lun 1: <PIONEER, CD-ROM DRM-624X, 1.03> SCSI2 5/cdrom removable
cd3 at scsibus1 targ 5 lun 2: <PIONEER, CD-ROM DRM-624X, 1.03> SCSI2 5/cdrom removable
cd4 at scsibus1 targ 5 lun 3: <PIONEER, CD-ROM DRM-624X, 1.03> SCSI2 5/cdrom removable
cd5 at scsibus1 targ 5 lun 4: <PIONEER, CD-ROM DRM-624X, 1.03> SCSI2 5/cdrom removable
cd6 at scsibus1 targ 5 lun 5: <PIONEER, CD-ROM DRM-624X, 1.03> SCSI2 5/cdrom removable

Gruesse
       Oskar

 ==============================================================================
 					Tragbar ist, was nicht herunterfaellt.
						    oskar@zappa.unna.ping.de
 ==============================================================================



--==_Exmh_671539170P
Content-Type: application/pgp-signature

-----BEGIN PGP MESSAGE-----
Version: 2.6.3i

iQCVAwUBMiwJvbA63tqjeAhZAQFz9QQAhH8uustZZnTagnmfAhQi8HiIMUv1oG9n
WyY3xjSI2I1KDWSSMo+7Bj44ruUIt/3Il5nG5B8dDg30wxbV9pa8hcehZIPaqjJx
pxKLHfBYtdP67QwVz5UFsAPZpxhlTKM0SWFJAOVEJ937K2tc2+tXnUS3y1WK0PdH
1795RA8NNxk=
=wcVr
-----END PGP MESSAGE-----

--==_Exmh_671539170P--