Today I supped and built a kernel with Jason's if_tlp_cardbus.c.

But if I insert a Netgear FAS310, or boot with the netgear inserted, i
get a message saying that the PCI host bridge isn't recognized.

Here's dmesg output after rebuilding with CARDBUS_DEBUG turned on.
Note the line with
     cardbus_attach_card: Vendor 0x8086, Product 0x7192, CIS 0x0

This is from a config file based on CARDBUS. (I'm using a newish Vaio,
and I have to turn off pcic0 to stop it attaching on top of the
cardbus bridge, and turn on the PCI-bios fixes to get the cardbus
interrupts configured properly.)

The Netgear card I'm using was recognized by the kludged-up patch for
Xircom carbus cards which was posted a couple of weeks back, and it
works with Windows.

Can someone give me a clue what I'm doing wrong?



NetBSD 1.4P (CARDBUS) #24: Thu Dec  9 00:31:44 PST 1999
    jonathan@Cuisinart.DSG.Stanford.EDU:/cuisinart/src/NetBSD/src/sys/arch/i386/compile/CARDBUS
cpu0: family 6 model 6 step a
cpu0: Intel Pentium II (Celeron) (686-class)
total memory = 65088 KB
avail memory = 56860 KB
using 839 buffers containing 3356 KB of memory
BIOS32 rev. 0 found at 0xfd7d0
PCI BIOS rev. 2.1 found at 0xfd9e4
pcibios: config mechanism [1][x], special cycles [x][x], last bus 0
PCI IRQ Routing Table rev. 1.0 found at 0xfdf60, size 128 bytes (6 entries)
PCI Interrupt Router at 000:07:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
--------------------------------------------
  device vendor product pin PIRQ   IRQ stage
--------------------------------------------
000:07:2 0x8086 0x7112  D   0x03   09  1
000:08:0 0x10c8 0x0005  A   0x00   09  0
000:08:1 0x10c8 0x8005  B   0x01   09  0
000:09:0 0x104d 0x8009  A   0x02   09  1
000:10:0 0x1180 0x0478  A   0x01   09  0
000:10:1 0x1180 0x0478  B   0x02   09  1
000:11:0 0x127a 0x2005  A   0x00   09  0
--------------------------------------------
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6194MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-C2202, 6900001646, 1021> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: can't map i/o space
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 8 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
Neomagic MagicMedia 256AV Audio (audio multimedia, revision 0x20) at pci0 dev 8 function 1 not configured
Sony CXD1947A FireWire Host Controller (Firewire serial bus, revision 0x01) at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 10 function 0 (Rx5C478), chipflags 2
cbb1 at pci0 dev 10 function 1 (Rx5C478), chipflags 2
Rockwell Semiconductor Systems product 0x2005 (miscellaneous communications, revision 0x01) at pci0 dev 11 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 9
cbb0: cacheline 0x0 lattimer 0x20
cbb0: bhlc 0x821000 lscp 0x20000000
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0 cacheline 0x0, lattimer 0x20
cardbusmatch: busname differs pcmcia <=> cardbus
pcmcia0 at cardslot0
cbb1: interrupting at irq 9
cbb1: cacheline 0x0 lattimer 0x20
cbb1: bhlc 0x821000 lscp 0x20000000
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 0 device 0 cacheline 0x0, lattimer 0x20
cardbusmatch: busname differs pcmcia <=> cardbus
pcmcia1 at cardslot1
apm0 at mainbus0: Power Management spec V1.2
apm0: battery life expectancy: 75%
apm0: A/C state: on
apm0: battery charge state: high charging
apm0: estimated 2h 15m
biomask ef4d netmask ef4d ttymask ffcf
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cardbus_attach_card: cb0 start
cardbus_attach_card: Vendor 0x8086, Product 0x7192, CIS 0x0
cardbus0: reading CIS data from configuration space
WRONG TUPLE: 0x86
WRONG TUPLE: 0x86
decode_tuples returns 0
(manufacturer 0x0, product 0x0) Intel 82443BX Host Bridge/Controller (AGP disabled) (host bridge, revision 0x03) at cardbus0 dev 0 function 0 not configured
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
strip0: Radio back in starmode