Hi !

I have the opportunity to boot an install-floppy on a brand new COMPAQ 5500
server. It's a PIII/Xeon 500Mhz/512Kb and configuration include a Smart Array
3200, a DLT on internal SCSI bus, and a dual-port  NC3122 ethernet board. I want
also to test FreeBSD, but don't know how to get the dmesg. Here is the output :

NetBSD 1.4.1 (INSTALL) #1: Tue Aug 10 00:04:40 MEST 1999
    fvdl@struis:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 7 step 3
cpu0: Intel Pentium III (686-class)
real mem  = 268042240
avail mem = 245157888
using 2822 buffers containing 13504512 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
ppb0 at pci0 dev 1 function 0: vendor 0x1011 product 0x0024 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
fxp0 at pci1 dev 4 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:50:8b:63:4c:86
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci1 dev 5 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp1: interrupting at irq 11
fxp1: Ethernet address 00:50:8b:63:4c:87
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x0e11 product 0xa0f0 (miscellaneous system) at pci0 dev 12 function 0
not configured
ncr0 at pci0 dev 13 function 0: ncr 53c875 fast20 wide scsi
ncr0: interrupting at irq 5
ncr0: minsync=25, maxsync=254, maxoffs=16, 128 dwords burst, large dma fifo
ncr0: single-ended, open drain IRQ driver, using on-chip SRAM
ncr0: restart (scsi reset).
scsibus0 at ncr0: 16 targets, 8 luns per target
ncr1 at pci0 dev 13 function 1: ncr 53c875 fast20 wide scsi
ncr1: interrupting at irq 9
ncr1: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo
ncr1: single-ended, open drain IRQ driver, using on-chip SRAM
scsibus1 at ncr1: 16 targets, 8 luns per target
ncr1: aborting job ...
ncr1:0: ERROR (90:0) (0-0-0) (0/0) @ (mem 0:00000000).
ncr1: regdump: c0 08 00 00 00 00 00 07 00 00 00 00 80 02 08 02.
ncr1: restart (fatal error).
probe(ncr1:0:0): COMMAND FAILED (9 ff) @0xf091cc00.
probe(ncr1:6:0): WIDE SCSI (16 bit) enabled
probe(ncr1:6:0): 10.0 MB/s (200 ns, offset 15)
st0 at scsibus1 targ 6 lun 0: <QUANTUM, DLT7000, 2255> SCSI2 1/sequential
removable
st0: st0(ncr1:6:0): WIDE SCSI (16 bit) enabled
drive empty
probe(ncr1:6:1): 20.0 MB/s (100 ns, offset 15)
vendor 0x1002 product 0x4756 (VGA display, revision 0x7a) at pci0 dev 14
function 0 not configured
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 15 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <COMPAQ  CDR-8435, , 0013> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 15
function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at pci0 dev
15 function 3 not configured
pchb0 at pci0 dev 16 function 0
pchb0: vendor 0x8086 product 0x84ca (rev. 0x03)
pchb1 at pci0 dev 18 function 0
pchb1: vendor 0x8086 product 0x84cb (rev. 0x04)
pchb2 at pci0 dev 19 function 0
pchb2: vendor 0x8086 product 0x84cb (rev. 0x04)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 4260 netmask 4e60 ttymask 4e62
md0: internal 1587K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs


___________________________________________________________________________

L'integrite de ce message n'etant pas assuree sur Internet, la societe 
ne peut etre tenue responsable de son contenu.
Si vous n'etes pas destinataire de ce message, merci de le detruire et 
d'avertir l'expediteur.

The integrity of this message cannot be guaranteed on the Internet. 
The society cannot therefore be considered responsible for the contents.
If you are not the intended recipient of this message, then please delete 
it and notify the sender.