try adding "media UTP" at the end of the line in your ifconfig.ti0 file.

John Maier
Administrator
Midamerica Internet Services
573-446-8881
http://www.midamerica.net

----- Original Message ----- 
From: "Uwe Klaus" <uklaus@hgb-leipzig.de>
To: <current-users@netbsd.org>
Sent: Wednesday, November 08, 2000 8:25 AM
Subject: Netgear GA620


> Hello,
> 
> I just put a Netgear GA620 card in a i386 box, 32 bit slot.
> With NetBSD1.5_BETA the card recognised correctly:
> 
> ti0 at pci0 dev 9 function 0: Netgear GA620 Gigabit Ethernet (rev. 0x01)
> ti0: interrupting at irq 9
> ti0: Ethernet address: 00:02:e3:00:04:ff
> 
> But I can't activate the card as the ifconfig output shows:
> 
> ti0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         address: 00:02:e3:00:04:ff
>         media: Ethernet 1000baseSX (autoselect)
>         status: no carrier
>         inet 194.94.211.221 netmask 0xffffff00 broadcast 194.94.211.255
> 
> The link LED on the switch is on, but on the GA620 off.
> 
> Any suggestions ?
> 
> Best regards
> Uwe
>