Subject: Re: thorpej-scsipi on -current as of yesterday.
To: Tim Rightnour <root@garbled.net>
From: Simon Burge <simonb@wasabisystems.com>
List: current-users
Date: 05/04/2001 18:51:57
Tim Rightnour wrote:
> I booted my LX164 alpha with -current as of yesterday to try something out..
> and got the following error out of the siop controller..
>
> I've never seen this before thorpej-scsipi went in.. just a random glitch?
>
>
>
> siop0 at pci0 dev 9 function 0: Symbios Logic 53c810a (fast scsi)
> siop0: interrupting at eb164 irq 3
> scsibus0 at siop0: 8 targets, 8 luns per target
> scsibus0: waiting 2 seconds for devices to settle...
> sd0 at scsibus0 target 0 lun 0: <IBM, CFA170S !S, 167A> SCSI2 0/direct
> fixed
> sd0: 163 MB, 2111 cyl, 2 head, 79 sec, 512 bytes/sect x 335270 sectors
> sd0: Sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
> st0 at scsibus0 target 1 lun 0: <EXABYTE, EXB-8500SMBANXH1, 0458> SCSI2
> 1/sequential removable
> st0: drive empty
> st0: Async, 8-bit transfers
> st0(siop0:0:1:0): Check Condition on CDB: 0x00 00 00 00 00 00
> SENSE KEY: Aborted Command
> ASC/ASCQ: Message Error
>
> sd2 at scsibus0 target 2 lun 0: <IBM, CFA170S !S, 167A> SCSI2 0/direct
> fixed
Heh, I just sent a message to port-alpha about exabytes on siop. I see
st1 at scsibus0 target 6 lun 0: <DEC, TKZ09 90097000, 045H> SCSI2 1/sequential removable
st1: drive empty
siop0: target 6 asynchronous
probe(siop0:6:1): Check Condition on CDB: 0x00 20 00 00 00 00
SENSE KEY: Aborted Command
ASC/ASCQ: Message Error
on boot, and AFAICR I only get the "Check Condition" message when the
drive is empty. This is on vanilla 1.5 and not -current.
Simon.
--
Simon Burge <simonb@wasabisystems.com>
NetBSD CDs, Support and Service: http://www.wasabisystems.com/