Hi,
Someone is reporting me a strange problem with a Promise Ultra100/TX2:
when 2 drives (master+slave) are attached to the primary channel the
adapter behaves in a very strange way (bus-master DMA registers returns
nonsense, for example). When the exact same drives are plugged to
the secondary channel all is fine. If only one master is plugged to the
primary channel all is fine too.

Did someone else test a TX2 with 2 devices on the primary channel ?
This is so strange that I suspect his adapter may have a problem ...

-- 
Manuel Bouyer <bouyer@antioche.eu.org>
--