I compiled NetBSD-current to my machine last night and plugged
Logitech's mouse to my USB bus. This mouse looks like MouseMan+ but
doesn't say it.. Model is M-BA47.

I got errors to dmesg:


NetBSD 1.5ZC (GENERIC) #0: Wed May 22 00:09:14 EEST 2002
    root@txpo.lcfnet.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD K6-2 (586-class), 400.92 MHz
cpu0: I-cache 32 KB 32b/line 2-way, D-cache 32 KB 32b/line 2-way
cpu0: features 8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8021bf<PGE,MMX>
total memory = 383 MB
avail memory = 349 MB
using 4935 buffers containing 19740 KB of memory
BIOS32 rev. 0 found at 0xfb4c0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs M1541 Host-PCI Bridge (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Acer Labs M5243 PCI-AGP Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: 3Dfx Interactive Voodoo3 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 2 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xc3)
ex0 at pci0 dev 10 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at irq 5
ex0: MAC address 00:50:da:72:87:1c
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
emuxki0 at pci0 dev 12 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x08)
emuxki0: interrupting at irq 10
emuxki0: TriTech unknown codec; no 3D stereo
audio0 at emuxki0: full duplex, mmap, independent
Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x08) at pci0 dev 12 function 1 not configured
pciide0 at pci0 dev 15 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L040J2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38172 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78177792 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <Hewlett-Packard CD-Writer Plus 7500, YMT3GLA6Z9, 1.0a> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
sd0 at atapibus0 drive 1: <IOMEGA  ZIP 100       ATAPI, , 23.D> type 0 direct removable
sd0: drive offline
sd0: 32-bit data port
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 3
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask eb45 netmask eb65 ttymask fbe7
Kernelized RAIDframe activated
uhub0: device problem, disabling port 1
uhub0: device problem, disabling port 1
uhub0: port error, restarting port 1
uhub0: device problem, disabling port 1
uhub0: port error, restarting port 1
uhub0: device problem, disabling port 1
uhub0: port error, restarting port 1
uhub0: device problem, disabling port 1
uhub0: port error, restarting port 1
uhub0: device problem, disabling port 1
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
boot device: wd0
root on wd0a dumps on wd0b
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA data transfers)
wd0a: DMA error reading fsbn 16 of 16-31 (wd0 bn 20482891; cn 20320 tn 5 sn 16), retrying
wd0: soft error (corrected)
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


Is there something in NetBSD's USB?

-- 
Mr. Ossi Herrala | ossi.herrala \@! iki.fi | Amateur radio: OH8HUB
Höylätie 7       | GSM: +358 40 750 7075   | IRC: ohub
90800 Oulu       | http://letku.kapsi.net/ |
:x