This is a multi-part message in MIME format.
--------------A3FB62637DA2070CD4C0A2F3
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello, folks.

I am trying to use an Epson Stylus C60 with NetBSD, using its
USB connection, but I could not get it to work at all.  Apparently,
nothing ever goes to the printer (it doesn flash its activity LED). even
though ktrace shows successful write()s and top shows that a "cat  file
> /dev/ulpt0" is often at ulptwr state, and runs fine until the entire
file is output (to where?).  If a turn the printer off and on, the
kernel thread successfully detects such disconnection/connection
conditions, and dettach/attach the port.

The printer works with the parallel port with NetBSD, and has no
problems with USB under Win2k.  USB under NetBSD, however, fails with
both ulpt0 and ulpn0, with the same symptom of nothing happening with
the printer.

Has anyone experienced anything similar?

I am sending attached dmesg output.  I hope it brings lights up
something.

--
        Pappires

... Qui habet aurem audiat quid Spiritus dicat ecclesiis.



--------------A3FB62637DA2070CD4C0A2F3
Content-Type: text/plain; charset=us-ascii;
 name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg"

NetBSD 1.6F (MATEUS-20020810) #4: Mon Sep 23 21:35:22 BRT 2002
    pappires@mateus.ppires.org:/usr/src/sys/arch/i386/compile/MATEUS-20020810
cpu0: Intel Pentium II/Celeron (Deschutes) (686-class), 334.11 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 255 MB
avail memory = 234 MB
using 3297 buffers containing 13188 KB of memory
BIOS32 rev. 0 found at 0xf0520
mainbus0 (root)
pnpbios0 at mainbus0: nodes 14, max len 114
lpt0 at pnpbios0 index 0 (PNP0400)
lpt0: io 378-37f 778-77f, irq 7
com0 at pnpbios0 index 2 (PNP0501)
com0: io 3f8-3ff, irq 4
com0: ns16550a, working fifo
com1 at pnpbios0 index 3 (PNP0501)
com1: io 2f8-2ff, irq 3
com1: ns16550a, working fifo
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7190 (rev. 0x02)
agp0 at pchb0: aperture at 0xe4000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x5159 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-7 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 4 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST360021A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57241 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <ATAPI CDROM, CXD3030  <OPTOMEDIA, 1.21> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhci0 at pci0 dev 4 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at pci0 dev 4 function 3 not configured
ne0 at pci0 dev 10 function 0: RealTek 8029 Ethernet
ne0: Ethernet address 00:00:21:61:8c:7e
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne0: interrupting at irq 10
ahc0 at pci0 dev 12 function 0
ahc0: interrupting at irq 11
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lm0 at isa0 port 0x290-0x297: W83781D
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
sb0 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5
sb0: Creative SB32 PnP Audio: dsp v4.16
audio0 at sb0: full duplex, mmap, independent
mpu0 at sb0
midi1 at mpu0: SB MPU-401 MIDI UART
opl0 at sb0: model OPL3
midi2 at opl0: SB Yamaha OPL3
isapnp0: <Creative SB32 PnP, CTL7002, , Game> port 0x200/8 not configured
isapnp0: <Creative SB32 PnP, CTL0021, , WaveTable> port 0x620/4 not configured
apm0 at mainbus0: Power Management spec V1.2
biomask fb45 netmask ff45 ttymask ffc7
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 5 lun 0: <IOMEGA, ZIP 100, D.09> SCSI2 0/direct removable
sd0: drive offline
sd0: async, 8-bit transfers
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft IntelliMouseM-. Explorer, rev 1.10/1.21, addr 3, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ulpt0: at uhub0 port 1 (addr 2) disconnected
ulpt0 detached
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
cd0: no disk label
Accounting started
ulpt0: at uhub0 port 1 (addr 2) disconnected
ulpt0 detached
lpt0: out of paper
lpt0: out of paper
lpt0: out of paper
set{u,g}id pid 514 (netstat) was invoked by uid 1001 ppid 513 (netscape) with fd 0 closed
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode

--------------A3FB62637DA2070CD4C0A2F3--