And messages..when adding mp3s to xmms i got those ...

Dec  2 21:16:57 vokk /netbsd: pciide0:1:0: lost interrupt
Dec  2 21:16:57 vokk /netbsd:   type: atapi tc_bcount: 0 tc_skip: 0
Dec  2 21:17:07 vokk /netbsd: pciide0:1:0: lost interrupt
Dec  2 21:17:07 vokk /netbsd: pciide0:1:0: lost interrupt
Dec  2 21:17:07 vokk /netbsd:   type: atapi tc_bcount: 0 tc_skip: 0
Dec  2 21:17:07 vokk /netbsd:   type: atapi tc_bcount: 0 tc_skip: 0
Dec  2 21:17:17 vokk /netbsd: pciide0:1:0: lost interrupt
Dec  2 21:17:17 vokk /netbsd: pciide0:1:0: lost interrupt
Dec  2 21:17:17 vokk /netbsd:   type: atapi tc_bcount: 0 tc_skip: 0
Dec  2 21:17:17 vokk /netbsd:   type: atapi tc_bcount: 0 tc_skip: 0
Dec  2 21:17:27 vokk /netbsd: pciide0:1:0: lost interrupt
Dec  2 21:17:27 vokk /netbsd: pciide0:1:0: lost interrupt
Dec  2 21:17:27 vokk /netbsd:   type: atapi tc_bcount: 0 tc_skip: 0
Dec  2 21:17:27 vokk /netbsd:   type: atapi tc_bcount: 0 tc_skip: 0




Tsiteerimine netbsd@ns.purk.ee:

> Hi
> 
> well it boots fine but when im trying to open any application
> i get those haunting messages.
> 
> Tnx for quick response!
> 
> NetBSD 1.6K (desktop) #0: Sun Dec  1 19:34:24 EET 2002
>     root@vokk.purk.ee:/usr/src/sys/arch/i386/compile/desktop
> total memory = 511 MB
> avail memory = 467 MB
> using 6144 buffers containing 26292 KB of memory
> BIOS32 rev. 0 found at 0xfb710
> mainbus0 (root)
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD Athlon XP 1900+ (686-class), 1600.83 MHz
> cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
> cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
> cpu0: features 383fbff<FXSR,SSE>
> cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
> cpu0: L2 cache 256 KB 64b/line 16-way
> cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully 
> associative
> cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
> cpu0: 8 page colors
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: VIA Technologies product 0x3189 (rev. 0x00)
> agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb168 (rev. 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga1 at pci1 dev 0 function 0: ATI Technologies Rage Fury MAXX AGP 4x 
> (TMDS) (rev. 0x00)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> bktr0 at pci0 dev 8 function 0
> bktr0: interrupting at irq 7
> bktr0: Card has no configuration EEPROM. Cannot determine card make.
> bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
> radio0 at bktr0
> Brooktree product 0x0878 (miscellaneous multimedia, revision 0x11) at 
pci0 
> dev 8 function 1 not configured
> ahc1 at pci0 dev 9 function 0
> ahc1: interrupting at irq 11
> ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
> scsibus0 at ahc1: 16 targets, 8 luns per target
> Texas Instruments TSB43AA23 OHCI IEEE 1394 Host Controller (Firewire 
serial
> 
> bus, interface 0x10) at pci0 dev 13 function 0 not configured
> uhci0 at pci0 dev 14 function 0: VIA Technologies VT83C572 USB Controller 
> (rev. 0x50)
> uhci0: interrupting at irq 3
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 14 function 1: VIA Technologies VT83C572 USB Controller 
> (rev. 0x50)
> uhci1: interrupting at irq 7
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 
> 0x51) at pci0 dev 14 function 2 not configured
> uhci2 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller 
> (rev. 0x80)
> uhci2: interrupting at irq 10
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller 
> (rev. 0x80)
> uhci3: interrupting at irq 7
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhci4 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller 
> (rev. 0x80)
> uhci4: interrupting at irq 11
> usb4 at uhci4: USB revision 1.0
> uhub4 at usb4
> uhub4: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 
> 0x82) at pci0 dev 16 function 3 not configured
> uhci2 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller 
> (rev. 0x80)
> uhci2: interrupting at irq 10
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller 
> (rev. 0x80)
> uhci3: interrupting at irq 7
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhci4 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller 
> (rev. 0x80)
> uhci4: interrupting at irq 11
> usb4 at uhci4: USB revision 1.0
> uhub4 at usb4
> uhub4: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 
> 0x82) at pci0 dev 16 function 3 not configured
> pcib0 at pci0 dev 17 function 0
> pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
> pciide0 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133
> controller
> pciide0: bus-master DMA support present
> pciide0: primary channel configured to compatibility mode
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3153AT>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 14659 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 30023280
> sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> pciide0: primary channel interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using 
DMA 
> data transfers)
> pciide0: secondary channel configured to compatibility mode
> atapibus0 at pciide0 channel 1: 2 targets
> cd0 at atapibus0 drive 0: <LITE-ON LTR-32123S, , XS0X> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> cd1 at atapibus0 drive 1: <DVD-ROM DDU1621, MT1329  Firmware, VER S1.> 
> cdrom removable
> cd1: 32-bit data port
> cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> pciide0: secondary channel interrupting at irq 15
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA 
> data transfers)
> cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA 
> data transfers)
> auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 Audio (rev 0x50)
> auvia0: interrupting at irq 11
> auvia0: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
> auvia0: variable rate audio, double rate output, S/PDIF, center DAC, 
> surround DAC, LFE DAC
> audio0 at auvia0: full duplex, mmap, independent
> vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
> vr0: interrupting at irq 10
> vr0: Ethernet address: 00:50:8d:fd:34:a0
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pciide1 at pci0 dev 19 function 0: Triones/Highpoint HPT374 IDE Controller
> pciide1: bus-master DMA support present
> pciide1: primary channel wired to native-PCI mode
> pciide1: using irq 11 for native-PCI interrupt
> pciide1: secondary channel wired to native-PCI mode
> pciide2 at pci0 dev 19 function 1: Triones/Highpoint HPT374 IDE Controller
> pciide2: bus-master DMA support present
> pciide2: primary channel wired to native-PCI mode
> pciide2: using irq 11 for native-PCI interrupt
> pciide2: secondary channel wired to native-PCI mode
> atapibus1 at pciide2 channel 1: 2 targets
> sd0 at atapibus1 drive 1: <IOMEGA  ZIP 100       ATAPI       Flopp, , 
12.A>
> 
> disk removable
> sd0: drive offline
> sd0: 32-bit data port
> sd0: drive supports PIO mode 3
> sd0(pciide2:1:1): using PIO mode 3
> isa0 at pcib0
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: PC speaker
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> isapnp0: no ISA Plug 'n Play devices found
> apm0 at mainbus0: Power Management spec V1.2
> Kernelized RAIDframe activated
> scsibus0: waiting 2 seconds for devices to settle...
> pciide2:1:1: pio setting rejected, falling back to PIO mode 0
> sd0(pciide2:1:1): using PIO mode 0
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> pciide0:1:0: lost interrupt
>         type: atapi tc_bcount: 0 tc_skip: 0
> 
> 
> 
> 
> 
> Tsiteerimine Martin Husemann <martin@duskware.de>:
> 
> > > I get a lot of interrupt mesages ... but 1.6 worked fine.
> > 
> > Well, it would be eventually helpful if you could post
> > 
> >  (a) the dmesg output when booting current (or, if that does not work,
> the
> >      output from 1.6) and
> >  (b) the exact failure message
> > 
> > Martin
> > 
> 
> 
> 
> 
> ---------------------------------------------
> Powered By "NetBSD" http://www.netbsd.org/
> 
> 




---------------------------------------------
Powered By "NetBSD" http://www.netbsd.org/