Subject: Re: Environmental Sensors on A7V333
To: None <current-users@netbsd.org>
From: Wolfgang S. Rupprecht <wolfgang+gnus20030528T134709@wsrcc.com>
List: current-users
Date: 05/28/2003 13:56:46
> > 	thoreau 60> priv ./mbmon
> > 	Temp.= 27.0, 55.0,  0.0; Rot.= 4272, 2732, 2732
> > 	Vcore = 1.79, 0.10; Volt. = 3.33, 4.89, 12.46, -12.82, -3.58

Thanks to all for pointing this program out and putting it into
pkgsrc.  I've always wondered what the temps on my Asus A7V were.

Now for the weird part.  My CPU's heatsink is at 30 degrees C as
measured by a Fluke 179 DVM using the temperature probe.  If the
environmental sensor is correct that would mean there is a 25 degree C
temperature gradient across the thermal pad between the Athlon and the
heatsink.  I just can't believe that.  Is there some
calibration/remapping table one has to apply???

    Temp.= 34.0, 55.0,  0.0; Rot.=    0,    0,    0
    Vcore = 1.78, 0.10; Volt. = 3.55, 4.97, 12.22, -12.70, -5.04

-wolfgang
-- 
Wolfgang S. Rupprecht 		     http://www.wsrcc.com/wolfgang/