Under current/i386 from September 17, I get all my drives:

===========================================================================
Sep 23 19:22:33 capo /netbsd: pciide0 at pci0 dev 9 function 0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
Sep 23 19:22:33 capo /netbsd: pciide0: bus-master DMA support present
Sep 23 19:22:33 capo /netbsd: pciide0: primary channel configured to compatibility mode
Sep 23 19:22:33 capo /netbsd: wd0 at pciide0 channel 0 drive 0: <ST320423A>
Sep 23 19:22:33 capo /netbsd: wd0: drive supports 32-sector PIO transfers, LBA addressing
Sep 23 19:22:33 capo /netbsd: wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
Sep 23 19:22:33 capo /netbsd: wd0: 32-bit data port
Sep 23 19:22:33 capo /netbsd: wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
Sep 23 19:22:33 capo /netbsd: pciide0: primary channel interrupting at irq 14
Sep 23 19:22:33 capo /netbsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
Sep 23 19:22:33 capo /netbsd: pciide0: secondary channel configured to compatibility mode
Sep 23 19:22:33 capo /netbsd: atapibus0 at pciide0 channel 1: 2 targets
Sep 23 19:22:33 capo /netbsd: cd0 at atapibus0 drive 0: <SONY CD-ROM CDU4821, MT1198-B Firmware, S0.Q> cdrom removable
Sep 23 19:22:33 capo /netbsd: cd0: 32-bit data port
Sep 23 19:22:33 capo /netbsd: cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
Sep 23 19:22:33 capo /netbsd: wd1 at pciide0 channel 1 drive 1: <MAXTOR 6L080L4>
Sep 23 19:22:33 capo /netbsd: wd1: drive supports 16-sector PIO transfers, LBA addressing
Sep 23 19:22:33 capo /netbsd: wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors
Sep 23 19:22:33 capo /netbsd: wd1: 32-bit data port
Sep 23 19:22:33 capo /netbsd: wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
Sep 23 19:22:33 capo /netbsd: pciide0: secondary channel interrupting at irq 15
Sep 23 19:22:33 capo /netbsd: cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
Sep 23 19:22:33 capo /netbsd: wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
===========================================================================

However, with current from the 27th I get:

===========================================================================
Sep 27 04:29:12 capo /netbsd: pciide0 at pci0 dev 9 function 0
Sep 27 04:29:12 capo /netbsd: pciide0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
Sep 27 04:29:12 capo /netbsd: pciide0: bus-master DMA support present
Sep 27 04:29:12 capo /netbsd: pciide0: primary channel configured to compatibility mode
Sep 27 04:29:12 capo /netbsd: pciide0: primary channel interrupting at irq 14
Sep 27 04:29:12 capo /netbsd: pciide0: secondary channel configured to compatibility mode
Sep 27 04:29:12 capo /netbsd: pciide0: secondary channel interrupting at irq 15
[...]
Sep 27 04:29:13 capo /netbsd: wd0 at pciide0 channel 0 drive 0: <ST320423A>
Sep 27 04:29:13 capo /netbsd: wd0: drive supports 32-sector PIO transfers, LBA addressing
Sep 27 04:29:13 capo /netbsd: wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
Sep 27 04:29:13 capo /netbsd: wd0: 32-bit data port
Sep 27 04:29:13 capo /netbsd: wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
Sep 27 04:29:13 capo /netbsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
Sep 27 04:29:13 capo /netbsd: atapibus0 at pciide0 channel 1: 2 targets
Sep 27 04:29:13 capo /netbsd: cd0 at atapibus0 drive 0: <SONY CD-ROM CDU4821, MT1198-B Firmware, S0.Q> cdrom removable
Sep 27 04:29:13 capo /netbsd: cd0: 32-bit data port
Sep 27 04:29:13 capo /netbsd: cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
Sep 27 04:29:13 capo /netbsd: cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
===========================================================================

Note that wd1 no longer appears, even though atapibus0 shows two targets.

					Gary Duzan