With bleeding edge -current as of this morning, I'm seeing some problems
with an(4) on my Sony Vaio PCG-R505GL laptop.  Since this is the first
I've tried NetBSD on here, I'm going to assume nothing.

I'm seeing some OpenBSD threads on this error that I'll look into.

The Aironet is a generic 350 LCM (the external antenna model).

an0 at pcmcia0 function 0: Cisco Systems, 350 Series Wireless LAN Adapter
 port 0x400-0x43f
pcmcia0: card irq 11

My first thought would be IRQ sharing/conflict, but this BIOS seems to be
happy (APIC IRQ routing, no manual assignment options in the menu), should
all be ACPI happy.

Firmware revision is: V5.02.19.

All the device IRQs match what Windows Xp shows them as...however, the
base memory for the an0, 0x400-0x43d doesn't match what XP says, it has:
FAC0-FAFF

Here is the complete dmesg(8) via /kern/msgbuf ftp(1)'d off via fxp0

-lava

root@addiction:/tmp/O/sys/arch/i386/compile/INSTALL
total memory = 254 MB
avail memory = 229 MB
using 3277 buffers containing 13108 KB of memory
BIOS32 rev. 0 found at 0xfd871
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium III (686-class), 1193.15 MHz, id 0x6b4
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x3575 (rev. 0x04)
agp at pchb0 not configured
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3577 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x3577 (miscellaneous display) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2482 (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2484 (rev. 0x02)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x2487 (rev. 0x02)
pci_intr_map: no mapping for pin C (line=ff)
uhci2: couldn't map interrupt
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x42)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
vendor 0x104c product 0x8023 (Firewire serial bus, interface 0x10) at pci1 dev 2 function 0 not configured
vendor 0x1180 product 0x0475 (CardBus bridge, revision 0x80) at pci1 dev 5 function 0 not configured
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 9
fxp0: Ethernet address 08:00:46:77:e5:40
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x248c (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
vendor 0x8086 product 0x2483 (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
vendor 0x8086 product 0x2485 (audio multimedia, revision 0x02) at pci0 dev 31 function 5 not configured
vendor 0x8086 product 0x2486 (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0: controller 0 detecting irqs with mask 0xde18:..10..11
pcic0: using irq 10 for socket events
md0: internal 2500 KB image area
an0 at pcmcia0 function 0: Cisco Systems, 350 Series Wireless LAN Adapter
 port 0x400-0x43f
pcmcia0: card irq 11
wd0 at atabus0 drive 0: <HITACHI_DK23DA-30>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
an0: read record failed
an0: failed to attach controller
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

l8*
	-lava

x.25 - minix - bitnet - plan9 - 110 bps - ASR 33 - base8