Subject: Re: 4th generation iPod not working?
To: KIYOHARA Takashi <kiyohara@kk.iij4u.or.jp>
From: antifuse <antifuse@gmail.com>
List: current-users
Date: 07/29/2004 15:01:53
This worked for me with no problems. Thank you so much!

--antifuse

On Thu, 29 Jul 2004 13:18:35 +0900 (JST), KIYOHARA Takashi
<kiyohara@kk.iij4u.or.jp> wrote:
> 
> From: antifuse <antifuse@gmail.com>
> Date: Wed, 28 Jul 2004 20:05:28 -0700
> 
> > I recently bought a 4th gen 20g iPod and have been trying to get it
> > working under NetBSD-current with both usb2 and firewire support. Both
> > get to about the same point: it identifies the device and scsibus, but
> > won't attach a scsi device to it. I have all scsi devices turned on in
> > my config.
> 
> firewire(4) from FreeBSD Please use. It seems that iPod mini can be used.
> i386, macppc check of operation. cobalt, alpha panic(9) It carries out.
> 
>   http://www.kk.iij4u.or.jp/~kiyohara/firewire/
> 
>   I use -current 5/30.
> 
> fwohci0 at pci1 dev 10 function 0: VIA Technologies VT3606 OHCI IEEE 1394 Controller (rev. 0x43)
> fwohci0: interrupting at irq 9
> fwohci0: OHCI version 1.0 (ROM=1)
> No. of Isochronous channels is 8.
> fwohci0: EUI64 0c:10:11:00:00:00:04:6d
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S100, max_rec 2 bytes.
> fwohci0: max_rec 2 -> 2048
> firewire0 at fwohci0: IEEE1394(FireWire) bus
> fwe0 at firewire0: Ethernet over FireWire
> fwe0: Fake Ethernet address: 0e:10:11:00:04:6d
> sbp0 at firewire0: SBP-2/SCSI over FireWire
> fwohci0: Initiate bus reset
> 
>   .. snip ..
> 
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> 
>   .. snip ..
> 
>                                                 <---- connect iPod mini
> fwohci0: BUS reset
> fwohci0: node_id=0x8800ffc0, gen=2, non CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
> firewire0: root node is not cycle master capable
> firewire0: bus manager 0 (me)
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc0, gen=3, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc1, gen=4, CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
> firewire0: bus manager 1 (me)
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc1, gen=5, CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
> firewire0: bus manager 1 (me)
> firewire0: New S400 device ID:000a2700027a09e5
> scsibus0 at sbp0: 1 target, 1 lun per target
> sd1 at scsibus0 target 0 lun 0: <Apple Co, iPod, 2700> simplified direct removable
> RBC size: mode sense=7999487, get cap=7999488
> sd1: 3906 MB, 3906 cyl, 64 head, 32 sec, 512 bytes/sect x 7999488 sectors
> RBC size: mode sense=7999487, get cap=7999488
> RBC size: mode sense=7999487, get cap=1820025805
> 
>                                         <--- scsictl scsibus0 detach 0 0
> 
> sd1 detached
> 
>                                         <--- scsictl scsibus0 scan 0 0
> 
> sd1 at scsibus0 target 0 lun 0: <Apple Co, iPod, 2700> simplified direct removable
> RBC size: mode sense=7999487, get cap=7999488
> sd1: 3906 MB, 3906 cyl, 64 head, 32 sec, 512 bytes/sect x 7999488 sectors
> RBC size: mode sense=7999487, get cap=7999488
> RBC size: mode sense=7999487, get cap=1820025805
> 
> ---------
> 
> I have canceled connection by carrying out eject(8).
> 
> # fwe(4) is unused. X-<
> 
> --
> kiyohara
>