Subject: Lucent MC-11 & NetBSD 2.0_RC4
To: usr <current-users@NetBSD.org>
From: Christian Goetz <cgoetz@pandora.be>
List: current-users
Date: 10/19/2004 00:10:25
This is a multi-part message in MIME format.
--------------020406050701050909000304
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
....
I still can't get my wireless pcmcia card (Lucent MC-11) work correctly
on my laptop (i386)
Hoping anybody can help me with this issue, here are my outputs of
wiconfig wi0 and dmesg.boot.
Thanks for any suggestion
Chistian Goetz
--------------020406050701050909000304
Content-Type: text/plain;
name="dmesg.boot.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.boot.log"
0 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000091 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Silicon Integrated System SiS 900 10/100 Ethernet (ethernet network, revision 0x91) at ? dev 4 function 0 (tag 0x80002000, intrtag 0x80002000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): SiS 900 10/100 Ethernet, rev 0x91
sip0: interrupting at irq 5
sip0: Ethernet address 00:03:0d:12:1a:a6
ukphy0 at sip0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000004, model 0x0020, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci0 dev 8 function 0: PCI configuration registers:
Common header:
0x00: 0xac50104c 0x02100007 0x06070002 0x00020000
Vendor Name: Texas Instruments (0x104c)
Device Name: PCI1410 PCI-CardBus Bridge (0xac50)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: CardBus (0x07)
Interface: 0x00
Revision ID: 0x02
BIST: 0x00
Header Type: 0x02 (0x02)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 2 (PCI-CardBus bridge) header:
0x10: 0x00000000 0x020000a0 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0340010b
0x40: 0x10551734 0x000003e1
Base address register at 0x10 (CardBus socket/ExCA registers)
not implemented(?)
Capability list pointer: 0xa0
Secondary status register: 0x0200
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detection: off
DEVSEL timing: medium (0x1)
PCI target aborts terminate CardBus bus master transactions: off
CardBus target aborts terminate PCI bus master transactions: off
Bus initiator aborts terminate initiator transactions: off
System error: off
Parity error: off
PCI bus number: 0x00
CardBus bus number: 0x00
Subordinate bus number: 0x00
CardBus latency timer: 0x00
CardBus memory region 0:
base register: 0x00000000
limit register: 0x00000000
CardBus memory region 1:
base register: 0x00000000
limit register: 0x00000000
CardBus I/O region 0:
base register: 0x00000000
limit register: 0x00000000
CardBus I/O region 1:
base register: 0x00000000
limit register: 0x00000000
Interrupt line: 0x0b
Interrupt pin: 0x01 (pin A)
Bridge control register: 0x0340
Parity error response: off
CardBus SERR forwarding: off
ISA enable: off
VGA enable: off
CardBus master abort reporting: off
CardBus reset: on
Functional interrupts routed by ExCA registers: off
Memory window 0 prefetchable: on
Memory window 1 prefetchable: on
Write posting enable: off
Subsystem vendor ID: 0x1734
Subsystem ID: 0x1055
Base address register at 0x44 (legacy-mode registers)
type: 32-bit i/o
base: 0x000003e0, size: 0x00000004
Capability register at 0xa0
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x48: 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449060 0x00000000 0x00000000 0x005c1d22
0x90: 0x404482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00100 0x00000014 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Texas Instruments PCI1410 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at ? dev 8 function 0 (tag 0x80004000, intrtag 0x80004000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 9 function 0: PCI configuration registers:
Common header:
0x00: 0x8023104c 0x02100116 0x0c001000 0x00004008
Vendor Name: Texas Instruments (0x104c)
Device Name: TSB43AA22/A OHCI IEEE 1394 Host Controller (0x8023)
Command register: 0x0116
I/O space accesses: off
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: on
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): on
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: Firewire (0x00)
Interface: 0x10
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xdffff800 0xdfff8000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x10551734
0x30: 0x00000000 0x00000044 0x00000000 0x0402010a
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xdffff800, size: 0x00000800
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xdfff8000, size: 0x00004000
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1734
Subsystem ID: 0x1055
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x44
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x04
Minimum Grant: 0x02
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0a
Capability register at 0x44
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x7e020001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000088
0xf0: 0x00000010 0x00001082 0x10551734 0x00000000
Don't know how to pretty-print device-dependent header.
Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 9 function 0 (tag 0x80004800, intrtag 0x80004800, intrswiz 0, intrpin 0x1, i/o off, mem on, no quirks) not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0
pcmcia0 at cardslot0
auich0: measured ac97 link rate at 44229 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
pcmcia0: CIS version PC Card Standard 5.0
pcmcia0: CIS info: ELSA, Vianect WLAN MC-11, Version 01.01,
pcmcia0: Manufacturer code 0x156, product 0x2
pcmcia0: function 0: network adapter, ccr addr 3e0 mask 1
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
wi0 at pcmcia0 function 0: ELSA, Vianect WLAN MC-11, Version 01.01
wi0: 802.11 address 00:02:2d:3c:24:2e
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (7.28.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wd0 at atabus0 drive 0: <ST94019A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
syncing disks... 5 5 5 5 done
NetBSD 2.0_RC4 (lap1) #0: Mon Oct 18 23:37:36 CEST 2004
root@cgate:/usr/src/sys/arch/i386/compile/lap1
total memory = 511 MB
avail memory = 493 MB
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 3064.65 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 648 Host Bridge (rev. 0x11)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System product 0x0003 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x5c61 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x25)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 96X UDMA6648 IDE controller (rev. 0x00)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
Silicon Integrated System product 0x7013 (modem communications, revision 0xa0) at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: interrupting at irq 10
auich0: ac97: VIA Technologies VT1612A codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
auich0: ac97: ext id 201<AMAP,VRA>
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci1: interrupting at irq 4
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00)
ehci0: interrupting at irq 3
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Silicon Integra EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91
sip0: interrupting at irq 5
sip0: Ethernet address 00:03:0d:12:1a:a6
ukphy0 at sip0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000004, model 0x0020, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci0 dev 8 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 9 function 0 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 11
cbb0: secondary bus number uninitialized; try PCIBIOS_BUS_FIXUP
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
auich0: measured ac97 link rate at 47997 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
pcmcia0: CIS version PC Card Standard 5.0
pcmcia0: CIS info: ELSA, Vianect WLAN MC-11, Version 01.01,
pcmcia0: Manufacturer code 0x156, product 0x2
pcmcia0: function 0: network adapter, ccr addr 3e0 mask 1
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
wi0 at pcmcia0 function 0: ELSA, Vianect WLAN MC-11, Version 01.01
wi0: 802.11 address 00:02:2d:3c:24:2e
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (7.28.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wd0 at atabus0 drive 0: <ST94019A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVD+RW GCA-4040N, , 1.02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(siside0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--------------020406050701050909000304
Content-Type: text/plain;
name="wiconfig.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="wiconfig.log"
NIC serial number: [ 01UT35362117 ]
Station name: [ ]
SSID for IBSS creation: [ ]
Current netname (SSID): [ USR8054 ]
Desired netname (SSID): [ ]
Current BSSID: [ 00:c0:49:e4:f6:da ]
Channel list: [ 1 2 3 4 5 6 7 8 9 10 11 ]
IBSS channel: [ 10 ]
Current channel: [ 3 ]
Comms quality/signal/noise: [ 62 126 64 ]
Promiscuous mode: [ Off ]
Port type: [ 1 ]
MAC address: [ 00:02:2d:3c:24:2e ]
TX rate (selection): [ 0 ]
TX rate (actual speed): [ 2 ]
Beacon Interval (current) [msec]: [ 100 ]
Maximum data length: [ 2304 ]
RTS/CTS handshake threshold: [ 2347 ]
fragmentation threshold: [ 2346 ]
RSSI -> dBm adjustment: [ 149 ]
Create IBSS: [ Off ]
Microwave oven robustness: [ 0 ]
Roaming mode(1:firm,3:disable): [ 1 ]
Access point density: [ 1 ]
Power Mgmt (1=on, 0=off): [ 0 ]
Max sleep time (msec): [ 100 ]
Vendor info: [ Lucent ID: 31 version: 7.28 ]
WEP encryption: [ Off ]
Authentication type
(1=OpenSys, 2=Shared Key): [ ]
TX encryption key: [ 1 ]
Encryption keys: [ ][ ][ ][ ]
--------------020406050701050909000304--