On Thu, Apr 13, 2006 at 08:04:52PM +0000, Christos Zoulas wrote:
>In article <slrn3vfse3t8cd.dpv.martijnb@atlas.ipv6.stack.nl>,
>Martijn van Buul  <martijnb@atlas.ipv6.stack.nl> wrote:
>>It occurred to me that Martin Husemann wrote in gmane.os.netbsd.current:
>>> The following list is what the NetBSD developers came up with. If you
>>> would like to suggest adding "your favorite bug", let us know.
>>>
>>>     Non Critical:
>>>       - PR/?????: NetBSD-amd64 nForce problems
>>
>>What problems, to be exact? A lot of gripes have been dealt with already.
>
>People promised to file PR's but none materialized.

I have an amd64 with a Nvidia nForce3 250 Host-PCI bridge and
friends. The only problem I've noticed is sometimes at startup
it locks after not finding cflash media, but that's one in ten,
unpredictable, hard to reproduce. It wouldn't suprise me if audio
did not work. In Linux it was unuseable with (bus?) noise.

I can try any specific tests, if not immedately. dmesg below.

// George



NetBSD 3.0 (ROXY) #0: Mon Dec 26 13:00:57 EST 2005
	root@roxy:/usr/src/sys/arch/i386/compile/ROXY
total memory = 1023 MB
avail memory = 997 MB
BIOS32 rev. 0 found at 0xfbd10
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Unknown K7 (Athlon) (686-class), 2210.87 MHz, id 0xf4a
cpu0: features 78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 78bfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMX>
cpu0: features 78bfbff<FXSR,SSE,SSE2>
cpu0: "AMD Athlon(tm) 64 Processor 3400+"
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Nvidia nForce3 250 Host-PCI bridge (rev. 0xa1)
agp at pchb0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: Nvidia nForce3 250 PCI-ISA bridge (rev. 0xa2)
Nvidia nForce3 250 SMBus Controller (SMBus serial bus, revision 0xa1) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: Nvidia nForce3 250 USB Host Controller (rev. 0xa1)
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 2 function 1: Nvidia nForce3 250 USB Host Controller (rev. 0xa1)
ohci1: interrupting at irq 5
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 2: Nvidia nForce3 250 USB2 Host Controller (rev. 0xa2)
ehci0: interrupting at irq 5
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 8 ports with 8 removable, self powered
Nvidia product 0x00df (miscellaneous bridge, revision 0xa2) at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0: nForce3 250 MCP-T AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
viaide0 at pci0 dev 8 function 0
viaide0: NVIDIA nForce3 250 IDE Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 10 function 0
viaide1: NVIDIA nForce3 250 Serial ATA Controller (rev. 0xa2)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
viaide1: using irq 11 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
ppb0 at pci0 dev 11 function 0: Nvidia nForce3 250 AGP (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia GeForce2 MX (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 14 function 0: Nvidia nForce3 250 PCI-PCI bridge (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
wm0 at pci2 dev 6 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 2
wm0: interrupting at irq 5
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:07:e9:29:37:d7
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
VIA Technologies VT6306 IEEE 1394 Host Controller (Firewire serial bus, interface 0x10, revision 0x46) at pci2 dev 7 function 0 not configured
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
umass0 at uhub2 port 8 configuration 1 interface 0
umass0: USB2.0 CardReader, rev 2.00/91.38, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 2 luns per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CF  CardReader, > disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <USB2.0, CBO CardReader, > disk removable
sd1: drive offline
wd0 at atabus0 drive 0: <Maxtor 6Y080P0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R5002, Y2PQ102690, 1031> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


-- 
George Georgalis, systems architect, administrator <IXOYE><
http://galis.org/ cell:646-331-2027 mailto:george@galis.org