On 26/04/07, Bartosz Maciejewski - SoftGroup <bartek@softgroup.com.pl> wrot=
e:
> Hi, I have problem running GENERIC.MP on machine equiped with 2x XEON 3Gh=
z.


This probably is a long shot, but -

The capture shows four CPUs. You have two cores. Are these dual core
Xeons, or the older single core woth hyperthreading enabled? If the
latter, I would try disabling the hyperthreading in the BIOS.

>
> First time it fails like this: http://maciejewski.org/DSC00127.JPG
>
> Then I removed pckbc* at acpi? and got it running step forward but also
> fails to boot: http://maciejewski.org/DSC00152.jpg

You don't have to rebuild the kernel for these tests - just do a

boot -c

and then

disable pckbc

or even

disable acpi.



>
> Then I removed all acpi stuff from kernel, and bt in debugger shows
> that: http://maciejewski.org/DSC00156.jpg
>
> What can I do more to get this running?
>
> Here is dmesg on non MP older kernel:
>
> NetBSD 4.99.7 (GENERIC) #1: Wed Jan 10 12:20:36 CET 2007
> root@******.pl:/usr/obj/sys/arch/i386/compile/GENERIC
> total memory =3D 2047 MB
> avail memory =3D 2002 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> BIOS32 rev. 0 found at 0xfd6a1
> mainbus0 (root)
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Intel (686-class), 3000.40 MHz, id 0xf4a
> cpu0: features bfebfbff
> cpu0: features bfebfbff
> cpu0: features bfebfbff
> cpu0: features2 641d
> cpu0: features3 20000000
> cpu0: "Intel(R) Xeon(TM) CPU 3.00GHz"
> cpu0: I-cache 12K uOp cache 8-way
> cpu0: L2 cache 2 MB 64B/line 8-way
> cpu0: ITLB 4K/4M: 64 entries
> cpu0: DTLB 4K/4M: 64 entries
> cpu0: using thermal monitor 1
> cpu0: 64 page colors
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: Intel E7525 Memory Controller Hub (rev. 0=D70c)
> Intel E7525 Error Reporting Device (undefined subclass 0=D700, revision
> 0=D70c) at p ci0 dev 0 function 1 not configured
> ppb0 at pci0 dev 2 function 0: Intel E7525 PCI Express Port A (rev. 0=D70=
c)
> pci1 at ppb0 bus 2
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb1 at pci1 dev 0 function 0: Intel 6700PXH PCI Express-to-PCI Bridge
> #0 (rev. 0=D709)
> pci2 at ppb1 bus 3
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb2 at pci1 dev 0 function 2: Intel 6700PXH PCI Express-to-PCI Bridge
> #1 (rev. 0=D709)
> pci3 at ppb2 bus 4
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> ex0 at pci3 dev 4 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
> (rev. 0x 78)
> ex0: interrupting at irq 3
> ex0: MAC address 00:04:75:ed:6c:0c
> exphy0 at ex0 phy 24: 3Com internal media interface
> exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ppb3 at pci0 dev 4 function 0: Intel E7525 PCI Express Port B (rev. 0=D70=
c)
> pci4 at ppb3 bus 5
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> bge0 at pci4 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
> bge0: interrupting at irq 3
> bge0: pcie mode=3D0=D7105000
> bge0: ASIC BCM5751 A1 (0=D74101), Ethernet address 00:14:5e:a4:35:d6
> bge0: setting short Tx thresholds
> brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FD X, auto
> ppb4 at pci0 dev 5 function 0: Intel product 0=D73598 (rev. 0=D70c)
> pci5 at ppb4 bus 6
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> bge1 at pci5 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
> bge1: interrupting at irq 3
> bge1: pcie mode=3D0=D7105000
> bge1: ASIC BCM5751 A1 (0=D74101), Ethernet address 00:14:5e:a4:35:d7
> bge1: setting short Tx thresholds
> brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FD X, auto
> ppb5 at pci0 dev 6 function 0: Intel product 0=D73599 (rev. 0=D70c)
> pci6 at ppb5 bus 7
> pci6: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb6 at pci6 dev 0 function 0: Intel product 0=D70330 (rev. 0=D707)
> pci7 at ppb6 bus 8
> pci7: i/o space, memory space enabled, rd/line, wr/inv ok
> ahd0 at pci7 dev 7 function 0
> ahd0: interrupting at irq 5
> ahd0: aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 101-133 MHz,
> 512 SCBs
> scsibus0 at ahd0: 16 targets, 8 luns per target
> ahd1 at pci7 dev 7 function 1
> ahd1: interrupting at irq 3
> ahd1: aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 101-133 MHz,
> 512 SCBs
> scsibus1 at ahd1: 16 targets, 8 luns per target
> ppb7 at pci6 dev 0 function 2: Intel product 0=D70332 (rev. 0=D707)
> pci8 at ppb7 bus 9
> pci8: i/o space, memory space enabled, rd/line, wr/inv ok
> Intel product 0=D7359b (miscellaneous system, revision 0=D70c) at pci0 de=
v 8
> functio n 0 not configured
> uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller
> (rev. 0=D702 )
> uhci0: interrupting at irq 3
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller
> (rev. 0=D702 )
> uhci1: interrupting at irq 5
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller
> (rev. 0=D702 )
> ehci0: interrupting at irq 7
> ehci0: BIOS has given up ownership
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> ppb8 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
> pci9 at ppb8 bus 1
> pci9: i/o space, memory space enabled
> vga1 at pci9 dev 6 function 0: ATI Technologies Radeon 7000/VE QY (rev.
> 0=D700)
> wsdisplay0 at vga1 kbdmux 1: console (80=D725, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> pcib0 at pci0 dev 31 function 0
> pcib0: Intel 82801EB LPC Interface Bridge (rev. 0=D702)
> piixide0 at pci0 dev 31 function 1
> piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0=D702)
> piixide0: bus-master DMA support present
> piixide0: primary channel configured to compatibility mode
> piixide0: primary channel interrupting at irq 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel configured to compatibility mode
> piixide0: secondary channel ignored (disabled)
> Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0=D702) at
> pci0 dev 31 function 3 not configured
> isa0 at pcib0
> com0 at isa0 port 0=D73f8-0=D73ff irq 4: ns16550a, working fifo
> pckbc0 at isa0 port 0=D760-0=D764
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> attimer0 at isa0 port 0=D740-0=D743: AT Timer
> pcppi0 at isa0 port 0=D761
> midi0 at pcppi0: PC speaker (CPU-intensive output)
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0=D7279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff
> npx0: reported by CPUID; using exception 16
> fdc0 at isa0 port 0=D73f0-0=D73f7 irq 6 drq 2
> pcppi0: attached to attimer0
> isapnp0: no ISA Plug 'n Play devices found
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> Kernelized RAIDframe activated
> scsibus0: waiting 2 seconds for devices to settle=85
> scsibus1: waiting 2 seconds for devices to settle=85
> atapibus0 at atabus0: 2 targets
> cd0 at atapibus0 drive 0: cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using D=
MA)
> sd0 at scsibus1 target 0 lun 0: disk fixed
> sd0: 70006 MB, 65494 cyl, 3 head, 729 sec, 512 bytes/sect x 143374000
> sectors
> sd0: sync (6.25ns offset 80), 16-bit (320.000MB/s) transfers, tagged
> queueing
> sd1 at scsibus1 target 1 lun 0: disk fixed
> sd1: 70006 MB, 65494 cyl, 3 head, 729 sec, 512 bytes/sect x 143374000
> sectors
> sd1: sync (6.25ns offset 80), 16-bit (320.000MB/s) transfers, tagged
> queueing
> ses0 at scsibus1 target 8 lun 0: processor fixed
> ses0: SAF-TE Compliant Device
> ses0: async, 8-bit transfers
> raid0: RAID Level 1
> raid0: Components: /dev/sd1a /dev/sd0a
> raid0: Total Sectors: 143373824 (70006 MB)
> boot device: raid0
> root on raid0a dumps on raid0b
> root file system type: ffs
> bge0: pcie mode=3D0=D7105000
> bge0: pcie mode=3D0=D7105000
> bge1: pcie mode=3D0=D7105000
> bge1: pcie mode=3D0=D7105000
> wsdisplay0: screen 1 added (80=D725, vt100 emulation)
> wsdisplay0: screen 2 added (80=D725, vt100 emulation)
> wsdisplay0: screen 3 added (80=D725, vt100 emulation)
> wsdisplay0: screen 4 added (80=D725, vt100 emulation)
>
> --
>   Bartosz
>
>
Chavdar Ivanov