--TuGSGWAzL/
Content-Type: text/plain; charset=us-ascii
Content-Description: message body text
Content-Transfer-Encoding: 7bit

>>>>> "Joerg" == Joerg Sonnenberger <joerg@britannica.bec.de> writes:

    Joerg> On Tue, Dec 18, 2007 at 06:07:36AM -0500, Jared D. McNeill
    Joerg> wrote:
    >> It's really quite simple. Ensure you have a -current kernel
    >> from at least now or later, and a machine that supports suspend
    >> to RAM. Both uni- and multiprocessor kernels should work.

    Joerg> http://www.netbsd.org/~joerg/netbsd-i386-mp.bz2 for
    Joerg> i386/GENERIC.MP

I tried this kernel on my

  acpi0: X/RSDT: OemId <ASUS  ,A7M266-D,30303031>, AslId <MSFT,31313031>

(complete dmesg attached)

Then I entered

  sysctl -w machdep.sleep_state=3

and nothing real happened:

  acpi0: entering state 3
  acpi0: cannot enter the sleep state (3)

Also, a 'shutdown -p now' is still not able to power down the machine.
It came up to displaying

  acpi0: entering state 5

... and the machine freezes. After pressing the reset button I wait
for the bios beep for pressing the power button/power down. Then the
machine powers down for less than a second and directly reboots again
(never seen this before!). So I have to wait for a second bios beep to
really power down the machine.

Strange!

Anything else I can test/provide?

Markus.


--TuGSGWAzL/
Content-Type: text/plain
Content-Description: netbsd-i386-mp dmesg acpi test
Content-Disposition: inline;
	filename="dmesg-netbsd-i386-mp"
Content-Transfer-Encoding: 7bit

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 4.99.42 (GENERIC.MP) #0: Tue Dec 18 12:27:00 CET 2007
joerg@britannica.bec.de:/data/NetBSD/src/sys/arch/i386/compile/GENERIC.MP
total memory = 1023 MB
avail memory = 993 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf1d30
SMBIOS rev. 2.3 @ 0xf3ba0 (49 entries)
System Manufacturer System Name (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon MP 2000+ (686-class), 1666.84 MHz, id 0x662
cpu0: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: "AMD Athlon(TM) MP 2000+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: AMD Power Management features: 1<TS>
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Athlon MP 2000+ (686-class), 1666.83 MHz, id 0x662
cpu1: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu1: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW>
cpu1: "AMD Athlon(TM) MP 2000+"
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 256 KB 64B/line 16-way
cpu1: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu1: AMD Power Management features: 1<TS>
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <ASUS  ,A7M266-D,30303031>, AslId <MSFT,31313031>
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
acpi0: fixed-feature sleep button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM1 (PNP0C01) [System Board] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
SYS1 (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
SYS2 (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
ECP (PNP0401) [ECP printer port] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
UAR2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
apm0 at acpi0: Power Management spec V1.2
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Advanced Micro Devices AMD762 Northbridge (rev. 0x11)
agp0 at pchb0: aperture at 0xf0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Advanced Micro Devices AMD762 AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies Radeon 9600 AP (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
ATI Technologies product 0x4170 (miscellaneous display) at pci1 dev 5 function 1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Advanced Micro Devices AMD768 PCI-ISA/LPC Bridge (rev. 0x05)
viaide0 at pci0 dev 7 function 1
viaide0: Advanced Micro Devices AMD768 IDE Controller (rev. 0x04)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
amdpm0 at pci0 dev 7 function 3: Advanced Micro Devices AMD768 Power Management Controller (rev. 0x03)
timecounter: Timecounter "amdpm0" frequency 3579545 Hz quality 1000
amdpm0: 24-bit timer
amdpm0: random number generator enabled (apprx. 52ms)
fxp0 at pci0 dev 9 function 0: i82550 Ethernet, rev 12
fxp0: interrupting at ioapic0 pin 21 (irq 10)
fxp0: Ethernet address 00:02:b3:xx:xx:xx
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 16 function 0: Advanced Micro Devices AMD768 PCI-PCI Bridge (rev. 0x05)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cmpci0 at pci2 dev 4 function 0: C-Media Electronics CMI8738/C3DX PCI Audio Device (rev. 0x10)
cmpci0: interrupting at ioapic0 pin 17 (irq 10)
audio0 at cmpci0: full duplex, mmap, independent
opl0 at cmpci0: model OPL3: LR swapped
midi1 at opl0: CMPCI Yamaha OPL3 (CPU-intensive output)
mpu0 at cmpci0
midi2 at mpu0: CMPCI MPU-401 MIDI UART (CPU-intensive output)
uhci0 at pci2 dev 6 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x62)
uhci0: interrupting at ioapic0 pin 17 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci2 dev 6 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x62)
uhci1: interrupting at ioapic0 pin 18 (irq 12)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 6 function 2: VIA Technologies VT8237 EHCI USB Controller (rev. 0x65)
ehci0: interrupting at ioapic0 pin 19 (irq 5)
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
emuxki0 at pci2 dev 8 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x0a)
emuxki0: interrupting at ioapic0 pin 19 (irq 5)
emuxki0: ac97: SigmaTel STAC9708 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
emuxki0: ac97: ext id 80<SDAC>
audio1 at emuxki0: full duplex, mmap, independent
joy0 at pci2 dev 8 function 1: Creative Labs PCI Gameport Joystick (rev 0x0a)
joy0: joystick not connected
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
wd0 at atabus0 drive 0: <ST3160023A>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1: <ST3160023A>
wd1: quirks 2<FORCE_LBA48>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-M1612, , J808> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <_NEC DVD_RW ND-2510A, , 2.18> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub3 at uhub2 port 4
uhub3: Genesys Logic USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2
uhub3: single transaction translator
uhub3: 4 ports with 4 removable, self powered
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Mouse, rev 1.00/1.20, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse0 at ums0 mux 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)

--TuGSGWAzL/--