Hello,
It seems that wpi firmware is not loadable anymore on my Dell XPS M1330 since
4.99.46. The last working install I had was 4.99.40/i386. I was told on /amd64
that a T61 is working with 4.99.46 so this is possibly an issue with the M1330
rather than the whole wpi driver.
The error is: "wpi0: fatal firmware error".
Is anyone aware of anything that changed since 4.99.40 that would explain my
issue ?
TIA,
Jo
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.46 (GENERIC) #0: Mon Dec 31 18:28:00 PST 2007
builds@wb28:/home/builds/ab/HEAD/amd64/200712310002Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 4086 MB
avail memory = 3938 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xf71c0 (44 entries)
Dell Inc. XPS M1330
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 1995.11 MHz
cpu0: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu0: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu0: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: Enhanced SpeedStep (1388 mV) 2000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 2200 2000 1800 1600 1400
1200
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 1995.18 MHz
cpu1: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu1: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu1: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu1: L2 cache 4 MB 64B/line 16-way
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <DELL , M08 ,27d7071a>, AslId <ASL ,00000061>
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (KBC, PNP0303): kbd port
pckbc2: io 0x60,0x64,0x62,0x66 irq 1
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
MB4 (PNP0C01) [System Board] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
MAD (PNP0200) [AT DMA Controller] at acpi0 not configured
COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
MB2 (PNP0C01) [System Board] at acpi0 not configured
MB3 (PNP0C01) [System Board] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
MB1 (PNP0C01) [System Board] at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
MBTN (PNP0C32) at acpi0 not configured
AMW0 (pnp0c14) at acpi0 not configured
acpitz0 at acpi0 (THM): critical 99.0C, passive cooling
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: Synaptics touchpad version 6.3
pms0: Palm detect, Multi-finger
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82965PM Host Bridge (rev. 0x0c)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga0 at pci0 dev 2 function 0: Intel 82965PM Integrated Graphics Device (rev.
0x0c)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
Intel 82965PM Integrated Graphics Device (miscellaneous display, revision 0x0c)
at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 9)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22 (irq 7)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 21 (irq 9)
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x02)
ppb0: disabling notification events
pci1 at ppb0 bus 11
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x02)
ppb1: disabling notification events
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter
(rev. 0x02)
wpi0: interrupting at ioapic0 pin 17 (irq 10)
wpi0: MoW2, address 00:1b:77:b6:58:e6
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x02)
ppb2: disabling notification events
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 5: Intel 82801H PCI Express Port #6 (rev. 0x02)
ppb3: disabling notification events
pci4 at ppb3 bus 9
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
Broadcom BCM5906M NetLink Fast Ethernet (ethernet network, revision 0x02) at
pci4 dev 0 function 0 not configured
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 20 (irq 10)
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 21 (irq 9)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci4: interrupting at ioapic0 pin 22 (irq 7)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci1: interrupting at ioapic0 pin 20 (irq 10)
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf2)
pci5 at ppb4 bus 3
pci5: i/o space, memory space enabled
fwohci0 at pci5 dev 1 function 0: Ricoh product 0x0832 (rev. 0x05)
fwohci0: interrupting at ioapic0 pin 19 (irq 5)
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 43:4f:c0:00:22:0d:8c:70
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
Ricoh product 0x0822 (SD Host Controller system, interface 0x01, revision 0x22)
at pci5 dev 1 function 1 not configured
Ricoh product 0x0843 (miscellaneous system, revision 0x12) at pci5 dev 1
function 2 not configured
Ricoh product 0x0592 (miscellaneous system, revision 0x12) at pci5 dev 1
function 3 not configured
Ricoh product 0x0852 (miscellaneous system, revision 0x12) at pci5 dev 1
function 4 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801HBM LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM SATA Controller
ahcisata0: interrupting at ioapic0 pin 17 (irq 10)
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe720e0c0
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17 (irq 10)
iic0 at ichsmb0: I2C bus
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x8384/0x7616 (rev. 2.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: codec[2]: 0x1095/0x1392 (rev. 0.0)
azalia0: codec[2]: High Definition Audio rev. 1.0
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA DVD+/-RW UJ-857G, , Z111> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus1 drive 0: <Hitachi HTS722020K9A300>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
ahcisata0 port 2: PHY offline
umass0 at uhub6 port 2 configuration 1 interface 0
umass0: SMI Corporation USB DISK, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB, Flash Disk, 1100> disk removable
sd0: fabricating a geometry
sd0: 3871 MB, 3871 cyl, 64 head, 32 sec, 512 bytes/sect x 7928832 sectors
sd0: fabricating a geometry
uhub7 at uhub0 port 2
uhub7: Broadcom BCM2045B2, class 9/0, rev 2.00/1.00, addr 2
uhub7: 3 ports with 0 removable, self powered
ugen0 at uhub6 port 6
ugen0: OmniVision Technologies, Inc. -2640-07.05.16.3 Laptop Integrated Webcam,
rev 2.00/1.00, addr 3
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
ugen1 at uhub1 port 2
ugen1: Novatel Wireless Novatel Wireless HSDPA Modem, rev 1.10/0.00, addr 2
ubt0 at uhub7 port 1
ubt0: Broadcom Corp BCM2045, rev 2.00/1.00, addr 3
uhidev0 at uhub7 port 2 configuration 1 interface 0
uhidev0: Broadcom Corp product 0x4502, rev 2.00/1.00, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 3 configuration 1 interface 0
uhidev1: Broadcom Corp product 0x4503, rev 2.00/1.00, addr 5, iclass 3/1
uhidev1: 125 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wpi0: fatal firmware error
acpibat0: battery info: DP-LGC52, LION, DELL NX5117 1438
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.0_RC5 (D430) #2: Tue Dec 11 22:08:47 CET 2007
ptijo%pak.tumfatig.net@localhost:/home/cvs/src/sys/arch/i386/compile/D430
total memory = 3574 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3498 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xffa10
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 1995.19 MHz, id 0x6fa
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: "Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1388 mV) 2000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest, current and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 2200 2000 1200
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Core 2 (Merom) (686-class), 1995.00 MHz, id 0x6fa
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu1: "Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 4 MB 64B/line 16-way
cpu1: using thermal monitor 1
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <DELL , M08 ,27d7071a>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64,0x62,0x66 irq 1
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C01 [System Board] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
PNP0103 [HPET Timer] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
pnp0c14 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 99.0C
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2a00 (rev. 0x0c)
vga1 at pci0 dev 2 function 0: Intel product 0x2a02 (rev. 0x0c)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
Intel product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2
function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 9)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22 (irq 7)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 21 (irq 9)
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x02)
pci1 at ppb0 bus 11
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x02)
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter
(rev. 0x02)
wpi0: interrupting at ioapic0 pin 17 (irq 10)
, MoW2, address 00:1b:77:b6:58:e6
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x02)
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 5: Intel 82801H PCI Express Port #6 (rev. 0x02)
pci4 at ppb3 bus 9
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
Broadcom BCM5906M NetLink Fast Ethernet (ethernet network, revision 0x02) at
pci4 dev 0 function 0 not configured
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 20 (irq 10)
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 21 (irq 9)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci4: interrupting at ioapic0 pin 22 (irq 7)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci1: interrupting at ioapic0 pin 20 (irq 10)
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf2)
pci5 at ppb4 bus 3
pci5: i/o space, memory space enabled
fwohci0 at pci5 dev 1 function 0: Ricoh product 0x0832 (rev. 0x05)
fwohci0: interrupting at ioapic0 pin 19 (irq 5)
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 43:4f:c0:00:22:0d:8c:70
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Ricoh product 0x0822 (SD Host Controller system, interface 0x01, revision 0x22)
at pci5 dev 1 function 1 not configured
Ricoh product 0x0843 (miscellaneous system, revision 0x12) at pci5 dev 1
function 2 not configured
Ricoh product 0x0592 (miscellaneous system, revision 0x12) at pci5 dev 1
function 3 not configured
Ricoh product 0x0852 (miscellaneous system, revision 0x12) at pci5 dev 1
function 4 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2815 (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM SATA Controller
ahcisata0: interrupting at ioapic0 pin 17 (irq 10)
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe720e0c0
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 2
Intel 82801H SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31
function 3 not configured
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
WARNING: Callback scheduled before sysmon task queue thread present.
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x8384/0x7616 (rev. 2.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM
formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM
formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: codec[2]: 0x1095/0x1392 (rev. 0.0)
azalia0: codec[2]: High Definition Audio rev. 1.0
azalia0: invalid PCM format: 0x00000000
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
Too many symbols for tree, skipping 3182 symbols
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA DVD+/-RW UJ-857G, , Z111> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus1 drive 0: <Hitachi HTS722020K9A300>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
ahcisata0 port 2: PHY offline
umass0 at uhub6 port 1 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SAMSUNG, MP0603H, 0000> disk fixed
sd0: 57277 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 117304992 sectors
uhub7 at uhub0 port 2
uhub7: Broadcom BCM2045B2, class 9/0, rev 2.00/1.00, addr 2
uhub7: 3 ports with 0 removable, bus powered
ugen0 at uhub6 port 6
ugen0: OmniVision Technologies, Inc. -2640-07.05.16.3 Laptop Integrated Webcam,
rev 2.00/1.00, addr 3
ugen1 at uhub1 port 2
ugen1: Novatel Wireless Novatel Wireless HSDPA Modem, rev 1.10/0.00, addr 2
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
cpu1: CPU 1 running
ubt0 at uhub7 port 1 configuration 1 interface 0
ubt0: Broadcom Corp BCM2045, rev 2.00/1.00, addr 3
uhidev0 at uhub7 port 2 configuration 1 interface 0
uhidev0: Broadcom Corp product 0x4502, rev 2.00/1.00, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 3 configuration 1 interface 0
uhidev1: Broadcom Corp product 0x4503, rev 2.00/1.00, addr 5, iclass 3/1
uhidev1: 125 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Attachment:
pgpFdcHDWMvmt.pgp
Description: PGP signature