Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: amd64 xen3_dom0 failing to boot - stalls (generic boots fine)
Mike Bowie wrote:
Sarton O'Brien wrote:
That's a good point, what's the basic procedure for overwriting grub
outside having the relevant boot.cfg? If there's a doc somewhere feel
free to point me to it or make me find it :)
I've only ever used netbsd with grub as my motivation was running xen. I
generally understand the principles though, having used *BSD variants
for quite a while.
Sarton
Take a look at installboot(8).
Good stuff. I'll get into this when I have the problem rectified.
As far as your boot stall goes, you could try booting single user by
setting "-s" rather than "-c" and see if that will get you to a console.
Ok, I got into single user fine. Unfortunately any attempt to mount file
systems off the internal hdds results in the lockup, although not
completely locked up as the acpi button press is still acknowledged.
Mind you, it does not successfully unmount raid0a.
So it looks like it's triggered by disk activity. Although I can remount
/ rw, I'm unable to mount /usr, with subsequent commands failing to
yield anything, including ^C.
For anyone interested, I've attached the dmesg from the fully working
generic in multiuser and from the crippled xen3 dom0 in single user.
Sarton
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.7 (GENERIC) #1: Tue Feb 3 10:38:37 EST 2009
root%spike.internal@localhost:/usr/obj/sys/arch/amd64/compile/GENERIC
total memory = 3582 MB
avail memory = 3457 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.3 @ 0xf0450 (60 entries)
Dell Inc. PowerEdge SC430
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2793MHz, id 0xf44
cpu1 at mainbus0 apid 1: Intel 686-class, 2793MHz, id 0xf44
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL , PESC430,00000007>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (VBTN, PNP0C0C): ACPI Power Button
pcppi1 at acpi0 (SPK, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x5f irq 0
COMA (PNP0501) at acpi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2778 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2779 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x27e2 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci4 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 17
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address 00:13:72:18:02:ad
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 23
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 21
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
vga0 at pci5 dev 7 function 0: vendor 0x18ca product 0x0020 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles
it.
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 20 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2793249970 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1
uhidev1: 4 report ids
ums0 at uhidev1 reportid 1: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=3, output=0, feature=0
atapibus0 at atabus0: 2 targets
st0 at atapibus0 drive 0: <SONY SDX-420V, 0001000680, 0101> tape removable
st0: drive empty
st0: 32-bit data port
st0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
st0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0 at atabus1 drive 0: <WDC WD4000AAKS-00TMA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <WDC WD4000AAKS-00TMA0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 781422592 (381554 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.7 (XEN3_DOM0) #1: Wed Feb 4 07:27:00 EST 2009
root%gogeta.internal@localhost:/mnt/usr/src/sys/arch/amd64/compile/obj/XEN3_DOM0
total memory = 256 MB
avail memory = 233 MB
timecounter: Timecounters tick every 10.000 msec
SMBIOS rev. 2.3 @ 0xf0450 (60 entries)
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xfe710
mainbus0: MP config table at 0xf0000, 684 bytes long
cpu0 at mainbus0 apid 0: (boot processor)
cpu1 at mainbus0 apid 1: (application processor)
ioapic0 at mainbus0 apid 8: pa 0xfec00000, virtual wire mode, version 20, 24 pin
s
ioapic0: can't remap to apid 8
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: Intel 686-class, 2793MHz, id 0xf44
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console major 143, unit 0
xencons0: using event channel 2
acpi0 at hypervisor0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL , PESC430,00000007>, AslId <ASL ,00000061>
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 5 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: failed to derive bus number, ignoring
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 3 at level 2
mpacpi: found subordinate bus 4 at level 2
mpacpi: 6 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (0/0)
mpacpi: ISA interrupt override 9 -> 9 (1/3)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 4 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0x0<type=0x0> flags 0xd<pol=0x1=Act
Hi,trig=0x3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0x0<type=0x0> flags 0x0<pol=0x0,tr
ig=0x0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0x0<type=0x0> flags 0x0<pol=0x0,tr
ig=0x0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0x0<type=0x0> flags 0x0<pol=0x0,tr
ig=0x0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0x0<type=0x0> flags 0x0<pol=0x0,tr
ig=0x0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0x0<type=0x0> flags 0x0<pol=0x0,tr
ig=0x0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0x0<type=0x0> flags 0x0<pol=0x0,tr
ig=0x0>)
local apic: pin 1 attached to NMI (type 0x1<type=0x1=NMI> flags 0x0<pol=0x0,trig
=0x0>)
ioapic0: pin 16 attached to pci0 device 1 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 1 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci0 device 1 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci0 device 1 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_A (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_B (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 21 attached to pci0 device 29 INT_A (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 22 attached to pci0 device 29 INT_B (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci0 device 29 INT_C (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 23 attached to pci0 device 29 INT_D (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 23 attached to pci0 device 30 INT_A (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 30 INT_B (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 31 INT_A (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 31 INT_B (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 20 attached to pci0 device 31 INT_C (type 0x0<type=0x0> flags 0xf<p
ol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci5 device 2 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci5 device 2 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci5 device 2 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci5 device 2 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci5 device 4 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci5 device 4 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci5 device 4 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci5 device 4 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci5 device 5 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci5 device 5 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci5 device 5 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci5 device 5 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci5 device 3 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci5 device 3 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci5 device 3 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci5 device 3 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci5 device 7 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci2 device 0 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci2 device 0 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci2 device 0 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci2 device 0 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci1 device 0 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci1 device 0 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci1 device 0 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci1 device 0 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci3 device 0 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci3 device 0 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci3 device 0 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci3 device 0 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci4 device 0 INT_A (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci4 device 0 INT_B (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci4 device 0 INT_C (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci4 device 0 INT_D (type 0x0<type=0x0> flags 0xf<po
l=0x3=Act Lo,trig=0x3=Level>)
ioapic0: int9 0x18998<vector=0x98,delmode=0x1,logical,level,masked,dest=0x0> 0x3
000000<target=0x3>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpibut0 at acpi0 (VBTN, PNP0C0C): ACPI Power Button
pcppi0 at acpi0 (SPK, PNP0800)
pcppi0: io 0x61
TMR (PNP0100) [AT Timer] at acpi0 not configured
COMA (PNP0501) [16550A-compatible COM port] at acpi0 not configured
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2778 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2779 (rev. 0x00)
pci1 at ppb0 bus 1
ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci2 at ppb1 bus 2
ppb1: added to list as bus 2
pci2: i/o space, memory space enabled
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
pci3 at ppb2 bus 3
ppb2: added to list as bus 3
pci3: i/o space, memory space enabled
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x27e2 (rev. 0x01)
pci4 at ppb3 bus 4
ppb3: added to list as bus 4
pci4: i/o space, memory space enabled
bge0 at pci4 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
ioapic0: int17 0x1a9a0<vector=0xa0,delmode=0x1,logical,actlo,level,masked,dest=0
x0> 0x3000000<target=0x3>
bge0: interrupting at ioapic0 pin 17, event channel 4
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address 00:13:72:18:02:ad
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FD
X, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
ioapic0: int21 0x1a9a8<vector=0xa8,delmode=0x1,logical,actlo,level,masked,dest=0
x0> 0x3000000<target=0x3>
uhci0: interrupting at ioapic0 pin 21, event channel 5
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
ioapic0: int22 0x1a9b0<vector=0xb0,delmode=0x1,logical,actlo,level,masked,dest=0
x0> 0x3000000<target=0x3>
uhci1: interrupting at ioapic0 pin 22, event channel 6
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
ioapic0: int18 0x1a9b8<vector=0xb8,delmode=0x1,logical,actlo,level,masked,dest=0
x0> 0x3000000<target=0x3>
uhci2: interrupting at ioapic0 pin 18, event channel 7
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
ioapic0: int23 0x1a9c0<vector=0xc0,delmode=0x1,logical,actlo,level,masked,dest=0
x0> 0x3000000<target=0x3>
uhci3: interrupting at ioapic0 pin 23, event channel 8
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 21, event channel 5
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci5 at ppb4 bus 5
ppb4: added to list as bus 5
pci5: i/o space, memory space enabled
vga0 at pci5 dev 7 function 0: vendor 0x18ca product 0x0020 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles i
t.
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
ioapic0: int14 0x9c8<vector=0xc8,delmode=0x1,logical,dest=0x0> 0x3000000<target=
0x3>
piixide0: primary channel interrupting at ioapic0 pin 14, event channel 9
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
ioapic0: int20 0x1a9d0<vector=0xd0,delmode=0x1,logical,actlo,level,masked,dest=0
x0> 0x3000000<target=0x3>
piixide1: using ioapic0 pin 20, event channel 10 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
vendor 0x8086 product 0x27da (SMBus serial bus, revision 0x01) at pci0 dev 31 fu
nction 3 not configured
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pckbdprobe: reset error 5
pmsprobe: reset error 5
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Xen clock: using event channel 11
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
xenbus0: using event channel 12
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ehci0: handing over low speed device on port 2 to uhci0
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1
uhidev1: 4 report ids
ums0 at uhidev1 reportid 1: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=3, output=0, feature=0
atapibus0 at atabus0: 2 targets
st0 at atapibus0 drive 0: <SONY SDX-420V, 0001000680, 0101> tape removable
st0: drive empty
st0: 32-bit data port
st0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
st0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0 at atabus1 drive 0: <WDC WD4000AAKS-00TMA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <WDC WD4000AAKS-00TMA0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Searching for RAID components...
Component on: wd0a: 781422705
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 2007001 Mod Counter: 1025
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1 blocksize: 512 numBlocks: 781422592
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Component on: wd1a: 781422705
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 2007001 Mod Counter: 1025
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1 blocksize: 512 numBlocks: 781422592
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Found: wd0a at 0
Found: wd1a at 1
RAID autoconfigure
Configuring raid0:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: wd0a at 0
Looking for 1 in autoconfig
Found: wd1a at 1
raid0: allocating 20 buffers of 65536 bytes.
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 781422592 (381554 MB)
raid0: configured ok
boot device: raid0
root on raid0a dumps on raid0b
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
Home |
Main Index |
Thread Index |
Old Index