viaide: lost interrupt

To: current-users%netbsd.org@localhost
Subject: viaide: lost interrupt
From: Kurt Schreiner <ks%ub.uni-mainz.de@localhost>
Date: Mon, 20 Apr 2009 17:59:30 +0200
Hi,

after updating a Sun (Oracle? ;-) Ultra40 to newest kernel (source
from ~16:00 MEST today) I see the following while booting:

[...]

viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at viaide1 channel 0
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: using ioapic0 pin 20 for native-PCI interrupt
atabus4 at viaide2 channel 0
atabus5 at viaide2 channel 1

[...]

viaide3 at pci4 dev 7 function 0
viaide3: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide3: using ioapic1 pin 20 for native-PCI interrupt
atabus6 at viaide3 channel 0
atabus7 at viaide3 channel 1

[...]

atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-845S, , D100> cdrom removable
viaide1 port 1: device present, speed: 3.0Gb/s
viaide2 port 0: device present, speed: 3.0Gb/s
viaide2 port 1: device present, speed: 3.0Gb/s
viaide1 port 0: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0: <ST3250823AS>
wd0: quirks 0x2<FORCE_LBA48>
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1 at atabus3 drive 0: <HITACHI HDS7225SBSUN250G 0548N68BPE>
wd1: 232 GB, 484514 cyl, 16 head, 63 sec, 512 bytes/sect x 488390625 sectors
wd2 at atabus4 drive 0viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
: <SEAGATE ST32500NSSUN250G 0740B56A8Y>
wd2: 232 GB, 484514 cyl, 16 head, 63 sec, 512 bytes/sect x 488390625 sectors
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying

[...sending BREAK on serial console ...]

fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip ffffffff80156b45 cs 8 rflags 202 cr2  0 cpl 8 rsp 
ffff800054ef7aa8
Stopped in pid 0.14 (system) at netbsd:breakpoint+0x5:  leave
db{1}> reboot
syncing disks... done
unmounting file systems... done
cd0: detached

and here it hangs, i.e powerbutton needed to poweroff and reboot...

Kurt


Here's the complete boot listing:


ehci0: detached
attimer0: detached
rebooting...
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.11 (U40) #138: Mon Apr 20 16:58:19 MEST 2009
        ks@ibetty:/u/NetBSD/arch/amd64/obj/sys/arch/amd64/compile/U40
total memory = 8190 MB
avail memory = 7932 MB
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2411MHz, id 0x20f12
cpu0: WARNING: errata present, BIOS upgrade may be
cpu0: WARNING: necessary to ensure reliable operation
cpu1 at mainbus0 apid 1: AMD 686-class, 2411MHz, id 0x20f12
cpu2 at mainbus0 apid 2: AMD 686-class, 2411MHz, id 0x20f12
cpu3 at mainbus0 apid 3: AMD 686-class, 2411MHz, id 0x20f12
ioapic0 at mainbus0 apid 4
ioapic1 at mainbus0 apid 5
acpi0 at mainbus0: Intel ACPICA 20080321
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer0 at acpi0 (PIT0, PNP0100): io 0x40-0x43 irq 0
SPK0 (PNP0800) [AT-style speaker sound] at acpi0 not configured
com0 at acpi0 (COM1, PNP0501-1): io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com0: console
pci0 at mainbus0 bus 0: configuration mode 1
NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci0 
dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA nForce4 PCI-ISA Bridge (rev. 0xf3)
nfsmbc0 at pci0 dev 1 function 1: NVIDIA nForce4 SMBus (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM (registered), data ECC, 2GB, 400MHz (PC-3200)
spdmem1 at iic0 addr 0x51
spdmem1: DDR SDRAM (registered), data ECC, 2GB, 400MHz (PC-3200)
spdmem2 at iic0 addr 0x54
spdmem2: DDR SDRAM (registered), data ECC, 2GB, 400MHz (PC-3200)
spdmem3 at iic0 addr 0x55
spdmem3: DDR SDRAM (registered), data ECC, 2GB, 400MHz (PC-3200)
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C busohci0 at pci0 dev 2 function 0: NVIDIA nForce4 USB Host 
Controller (rev. 0xa2)
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: NVIDIA nForce4 USB2 Host Controller (rev. 0xa3)
ehci0: interrupting at ioapic0 pin 21
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
auich0: interrupting at ioapic0 pin 22
auich0: ac97: Avance Logic ALC850 codec; no 3D stereo
auich0: ac97: ext id 0x9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at viaide1 channel 0
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: using ioapic0 pin 20 for native-PCI interrupt
atabus4 at viaide2 channel 0
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: NVIDIA nForce4 PCI Host Bridge (rev. 0xf2)
pci1 at ppb0 bus 1
fwohci0 at pci1 dev 7 function 0: Texas Instruments TSB43AA22/A IEEE 1394 Host 
Controller (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:20:14:40:01:08:b9
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
nfe0 at pci0 dev 10 function 0: NVIDIA nForce4 Ethernet (rev. 0xf3)
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address 00:14:4f:23:fb:16
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 13 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xf3)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci3 at ppb2 bus 3
vga0 at pci3 dev 0 function 0: NVIDIA product 0x00cd (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1
drm at vga0 not configured
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices K8 AMD64 HyperTransport Configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices K8 AMD64 Address Map Configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices K8 AMD64 DRAM Configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices K8 AMD64 Miscellaneous Configuration (rev. 0x00)
pchb4 at pci0 dev 25 function 0
pchb4: Advanced Micro Devices K8 AMD64 HyperTransport Configuration (rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: Advanced Micro Devices K8 AMD64 Address Map Configuration (rev. 0x00)
pchb6 at pci0 dev 25 function 2
pchb6: Advanced Micro Devices K8 AMD64 DRAM Configuration (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: Advanced Micro Devices K8 AMD64 Miscellaneous Configuration (rev. 0x00)
isa0 at pcib0
pci4 at mainbus0 bus 128
NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci4 
dev 0 function 0 not configured
NVIDIA product 0x00d3 (miscellaneous memory, revision 0xf3) at pci4 dev 1 
function 0 not configured
viaide3 at pci4 dev 7 function 0
viaide3: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide3: using ioapic1 pin 20 for native-PCI interrupt
atabus6 at viaide3 channel 0
atabus7 at viaide3 channel 1
nfe1 at pci4 dev 10 function 0: NVIDIA nForce4 Ethernet (rev. 0xf3)
nfe1: interrupting at ioapic1 pin 21
nfe1: Ethernet address 00:14:4f:23:fb:17
makphy1 at nfe1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb3 at pci4 dev 13 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xf3)
pci5 at ppb3 bus 129
ppb4 at pci4 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci6 at ppb4 bus 130
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
audio0 at auich0: full duplex, independent
uhub0 at usb0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-845S, , D100> cdrom removable
viaide1 port 1: device present, speed: 3.0Gb/s
viaide2 port 0: device present, speed: 3.0Gb/s
viaide2 port 1: device present, speed: 3.0Gb/s
viaide1 port 0: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0: <ST3250823AS>
wd0: quirks 0x2<FORCE_LBA48>
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1 at atabus3 drive 0: <HITACHI HDS7225SBSUN250G 0548N68BPE>
wd1: 232 GB, 484514 cyl, 16 head, 63 sec, 512 bytes/sect x 488390625 sectors
wd2 at atabus4 drive 0viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
: <SEAGATE ST32500NSSUN250G 0740B56A8Y>
wd2: 232 GB, 484514 cyl, 16 head, 63 sec, 512 bytes/sect x 488390625 sectors
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
viaide2:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wd2d: device timeout reading fsbn 0 (wd2 bn 0; cn 0 tn 0 sn 0), retrying
Prev by Date: Re: New interrupt storm on ioapic0 pin 9 with -current 5.99.11
Next by Date: Re: Enabling drm?
Previous by Thread: New interrupt storm on ioapic0 pin 9 with -current 5.99.11
Next by Thread: build problem of current: XEN3_DOMU
Indexes:
Home | Main Index | Thread Index | Old Index