5.0 and ahd

To: current-users%netbsd.org@localhost
Subject: 5.0 and ahd
From: Mark Davies <mark%ecs.vuw.ac.nz@localhost>
Date: Mon, 18 May 2009 11:03:57 +1200
I have a server that has been successfully running 4.99.8. On 
upgrading it to 5.0 the adaptec SCSI adapter has stopped working, 
resulting in long delays during boot and processes hanging trying to 
talk to the tape drive (only thing attached to it).

dmesg is attached, any ideas?  (currently I've replaced the ahd with 
an old PCI ahc card and thats got things going)

cheers
mark

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 
2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (ECS_SERVER) #11: Wed Apr 29 14:28:18 NZST 2009
        
mark%turakirae.ecs.vuw.ac.nz@localhost:/local/SAVE/build.obj/src/work/5/src/sys/arch/i386/compile/ECS_SERVER
total memory = 1023 MB
avail memory = 994 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation PowerEdge 2800
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2793MHz, id 0xf41
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0 apid 3: pa 0xfec83000, version 20, 24 pins
ioapic3 at mainbus0 apid 4: pa 0xfec81000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  ,PE BKC  ,00000001>, AslId <MSFT,0100000a>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPK, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13): aux port
pckbc2: irq 12
COMA (PNP0501) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x3590 (rev. 0x09)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x3595 (rev. 
0x09)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x0330 (rev. 
0x06)
ppb1: disabling notification events
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
amr0 at pci2 dev 14 function 0: AMI RAID <PERC 4e/Di>
amr0: interrupting at ioapic0 pin 18
amr0: firmware 521S, BIOS H430, 256MB RAM
ld0 at amr0 unit 0: RAID 5, optimal
ld0: 341 GB, 44542 cyl, 255 head, 63 sec, 512 bytes/sect x 715571200 
sectors
ppb2 at pci1 dev 0 function 2: vendor 0x8086 product 0x0332 (rev. 
0x06)
ppb2: disabling notification events
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ahd0 at pci3 dev 11 function 0
ahd0: interrupting at ioapic0 pin 19
ahd0: aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133 MHz, 
512 SCBs
scsibus0 at ahd0: 16 targets, 8 luns per target
ppb3 at pci0 dev 3 function 0: vendor 0x8086 product 0x3596 (rev. 
0x09)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 
0x09)
ppb4: disabling notification events
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci4 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 
0x09)
ppb5: disabling notification events
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 4 function 0: vendor 0x8086 product 0x3597 (rev. 
0x09)
ppb6: disabling notification events
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 5 function 0: vendor 0x8086 product 0x3598 (rev. 
0x09)
pci8 at ppb7 bus 10
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci8 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 
0x09)
ppb8: disabling notification events
pci9 at ppb8 bus 11
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci9 dev 7 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 
5
wm0: interrupting at ioapic2 pin 0
wm0: 32-bit 66MHz PCI bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:11:43:f0:e7:d0
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ukphy0 at wm0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: no media present
ppb9 at pci8 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 
0x09)
ppb9: disabling notification events
pci10 at ppb9 bus 12
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci10 dev 8 function 0: Intel i82541GI 1000BASE-T Ethernet, 
rev. 5
wm1: interrupting at ioapic2 pin 1
wm1: 32-bit 66MHz PCI bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:11:43:f0:e7:d1
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ukphy1 at wm1 phy 2: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000000, model 0x0000, rev. 0
ukphy1: no media present
ppb10 at pci0 dev 6 function 0: vendor 0x8086 product 0x3599 (rev. 
0x09)
ppb10: disabling notification events
pci11 at ppb10 bus 13
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24d2 (rev. 
0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24d4 (rev. 
0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24d7 (rev. 
0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24dd (rev. 
0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb11 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 
0xc2)
pci12 at ppb11 bus 16
pci12: i/o space, memory space enabled
vendor 0x1028 product 0x0011 (undefined subclass 0x00) at pci12 dev 5 
function 0 not configured
vendor 0x1028 product 0x0012 (undefined subclass 0x00) at pci12 dev 5 
function 1 not configured
vendor 0x1028 product 0x0014 (undefined subclass 0x00) at pci12 dev 5 
function 2 not configured
cmdide0 at pci12 dev 6 function 0
cmdide0: Silicon Image 0680 (rev. 0x02)
cmdide0: bus-master DMA support present
cmdide0: primary channel wired to native-PCI mode
cmdide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel wired to native-PCI mode
atabus1 at cmdide0 channel 1
vga1 at pci12 dev 13 function 0: vendor 0x1002 product 0x5159 (rev. 
0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using 
wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x24d0 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus2 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus3 at piixide0 channel 1
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2793301560 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, 
addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, 
addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, 
addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, 
addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
sd0 at atapibus0 drive 0: <VIRTUALFLOPPY DRIVE               Flopp, , 
> disk removable
sd0: drive offline
sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0: unable to open device, error = 19
sd0: 32-bit data port
sd0: drive supports PIO mode 3
cd0 at atapibus0 drive 1: <VIRTUALCDROM DRIVE, , > cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3
sd0(cmdide0:0:0): using PIO mode 3
cd0(cmdide0:0:1): using PIO mode 3
atapibus1 at atabus2: 2 targets
cd1 at atapibus1 drive 0: <HL-DT-STDVD-ROM GDR8082N, , 0106> cdrom 
removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 
(Ultra/33)
cd1(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) 
(using DMA)
uhub4 at uhub3 port 3: vendor 0x413c product 0xa001, class 9/0, rev 
2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ipmi0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
st0 at scsibus0 target 6 lun 0: <QUANTUM, SDLT320, 5252> tape 
removable
st0: ipmi0: critical under limit on 'FAN 2 RPM1'
ipmi0: critical under limit on 'FAN 1 RPM1'
ahd0: ahd_timeout
ahd0:SCB 0xf - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x1 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] 
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] 
SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0] SSTAT0[0x0] 
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] 
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] 

SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xf NEXTSCB 0x0
qinstart = 0x9 qinfifonext = 0xa
 0xf
WAITING_TID_QUEUES:
Pending list:
 15 FIFO_USE[0xf] SCB_CONTROL[0x48] SCB_SCSIID[0x67] 
Total 1
Kernel Free SCB list: 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
Sequencer Complete DMA-inprog list: 
Sequencer Complete list: 
Sequencer DMA-Up and Complete list: 

ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xf
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0 0x0 0x0 
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc] 
ahd0: REG0 == 0xf, SINDEX = 0x119, DINDEX = 0xe1
ahd0: SCBPTR == 0xf, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff1d
CDB 0 0 0 0 0 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
>>>>>>>>>>>>>>>>>
ahd0: ahd_timeout
ahd0:SCB 0xf - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x1 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] 
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] 
SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0] SSTAT0[0x0] 
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] 
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] 

SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xf NEXTSCB 0x0
qinstart = 0xa qinfifonext = 0xb
 0xf
WAITING_TID_QUEUES:
Pending list:
 15 FIFO_USE[0xf] SCB_CONTROL[0x48] SCB_SCSIID[0x67] 
Total 1
Kernel Free SCB list: 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
Sequencer Complete DMA-inprog list: 
Sequencer Complete list: 
Sequencer DMA-Up and Complete list: 

ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xf
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0 0x0 0x0 
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc] 
ahd0: REG0 == 0xf, SINDEX = 0x119, DINDEX = 0xe1
ahd0: SCBPTR == 0xf, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff1d
CDB 1a 0 0 0 c 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
>>>>>>>>>>>>>>>>>
density code 108, variable blocks, write-protected
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0:SCB 0xf - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x109 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
DFFSTAT[0x33] SCSISIGI[0xb6] SCSIPHASE[0x0] SCSIBUS[0xc1] 
LASTPHASE[0xa0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] 
SEQINTCTL[0x0] SEQ_FLAGS[0x40] SEQ_FLAGS2[0x0] SSTAT0[0x2] 
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] 
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] 

SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0xf NEXTSCB 0x0
qinstart = 0xd qinfifonext = 0xd

WAITING_TID_QUEUES:
Pending list:
 15 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x67] 
Total 1
Kernel Free SCB list: 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
Sequencer Complete DMA-inprog list: 
Sequencer Complete list: 
Sequencer DMA-Up and Complete list: 

ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xf
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0 0x0 0x0 
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc] 
ahd0: REG0 == 0xf, SINDEX = 0x180, DINDEX = 0xe1
ahd0: SCBPTR == 0xf, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff1d
CDB 0 0 0 0 0 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
>>>>>>>>>>>>>>>>>
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
ahd0: ahd_timeout
ahd0: Timedout SCB already complete. Interrupts may not be 
functioning.
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Accounting started
ahd0: ahd_timeout
ahd0:SCB 0xf - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x109 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
DFFSTAT[0x33] SCSISIGI[0xb6] SCSIPHASE[0x0] SCSIBUS[0xc1] 
LASTPHASE[0xa0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] 
SEQINTCTL[0x0] SEQ_FLAGS[0x40] SEQ_FLAGS2[0x0] SSTAT0[0x2] 
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] 
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] 
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] 

SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0xf NEXTSCB 0x0
qinstart = 0x16 qinfifonext = 0x16

WAITING_TID_QUEUES:
Pending list:
 15 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x67] 
Total 1
Kernel Free SCB list: 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
Sequencer Complete DMA-inprog list: 
Sequencer Complete list: 
Sequencer DMA-Up and Complete list: 

ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xf
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] 
SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 
CCSGCTL[0x10] 
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0 0x0 0x0 
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc] 
ahd0: REG0 == 0xf, SINDEX = 0x180, DINDEX = 0x120
ahd0: SCBPTR == 0xf, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff1d
CDB 0 0 0 0 0 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
>>>>>>>>>>>>>>>>>
Follow-Ups:
- Re: 5.0 and ahd
  - From: Manuel Bouyer
Prev by Date: Re: USB troubles with SB600/SB700 chipsets
Next by Date: Re: USB troubles with SB600/SB700 chipsets
Previous by Thread: USB troubles with SB600/SB700 chipsets
Next by Thread: Re: 5.0 and ahd
Indexes:
Home | Main Index | Thread Index | Old Index