USB problems after memory upgrade

To: current-users%netbsd.org@localhost
Subject: USB problems after memory upgrade
From: Jörn Clausen <joernc%googlemail.com@localhost>
Date: Sun, 11 Sep 2011 13:13:29 +0200
Hi!

After upgrading my HP ProLiant from 1GB to 4GB RAM, the USB stick I
use as system disk fails after some time with

umass0: BBB bulk-out clear stall failed, TIMEOUT
ehci_sync_hc: tsleep() = 35

According to this thread

http://mail-index.netbsd.org/netbsd-users/2009/04/15/msg003491.html
http://mail-index.netbsd.org/netbsd-users/2009/04/15/msg003492.html

the problem is the USB controller. I don't know if it is an nVidia one
as mentioned in kern/37884:

ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0

I have reduced the memory to 2GB and hope this is more stable. Is a
fix possible, so I can use 4GB?

Thanks!

complete dmesg output:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.55 (GENERIC) #0: Tue Aug 23 07:06:16 UTC 2011
        
builds%b6.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201108230510Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 1919 MB
avail memory = 1845 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant MicroServer (   )
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Athlon(tm) II Neo N36L Dual-Core
Processor, id 0x100f63
cpu1 at mainbus0 apid 1: AMD Athlon(tm) II Neo N36L Dual-Core
Processor, id 0x100f63
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HP    ,ProLiant,20100930>, AslId <HP  ,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
BROD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
ipmi: bus_space_map(..., 0, 2, 0, 0xffffffff81033b88) failed
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x103c product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9712 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon Mobility HD 4200
radeondrm0: Initialized radeon 1.29.0 20080613
ppb1 at pci0 dev 6 function 0: vendor 0x1022 product 0x9606 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5723 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 18
bge0: adjust device control 0x192000 -> 0x195000
bge0: ASIC BCM5784 A1 (0x5784100), Ethernet address 3c:4a:92:77:c4:5c
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP
0xf722ff03<PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
ohci1: SMM does not respond, resetting
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0
piixpm0: vendor 0x1002 product 0x4385 (rev. 0x42)
piixpm0: SMBus disabled
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller
(rev. 0x40)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus4 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus5 at ixpide0 channel 1
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ohci2 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci2
usb5 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00)
amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family10h)
pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbc: cmd word write error
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  4465 mW, 1300 MHz
acpicpu0: P1: FFH, lat   4 us, pow  3600 mW, 1100 MHz
acpicpu0: P2: FFH, lat   4 us, pow  2392 mW,  800 MHz
acpicpu0: T0: HLT, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: HLT, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: HLT, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: HLT, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: HLT, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: HLT, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: HLT, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: HLT, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1297961090 Hz quality 3000
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD10EARS-00MVWB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD20EARX-00PASB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: SanDisk Cruzer Blade, rev 2.00/1.02, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Blade, 1.10> disk removable
sd0: fabricating a geometry
sd0: 7633 MB, 7633 cyl, 64 head, 32 sec, 512 bytes/sect x 15633408 sectors
sd0: fabricating a geometry
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b

-- 
Joern Clausen
http://thebloeg.blogspot.com/
http://www.oe-files.de/oefiles/
Follow-Ups:
- Re: USB problems after memory upgrade
  - From: Matthias Scheler
Prev by Date: Re: current instability
Next by Date: Re: current instability
Previous by Thread: daily CVS update output
Next by Thread: Re: USB problems after memory upgrade
Indexes:
Home | Main Index | Thread Index | Old Index