Current-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Areca 1882 SAS controller support?



All,

we are looking at getting a new fileserver, and the spec has an Areca 1882
SAS controller - or would have, if there were NetBSD support for it. I
added the PCI IDs, regenerated sys/dev/pci/pcidevs*.h, and the dealer ran
the resulting netbsd-6 kernel, producing the attached dmesg.

The arcmsr0 shows up, but that's it - no attached disks. How hard would it
be to add support, or should I look elsewhere? I haven't been too happy
with LSI's support.

        hauke

-- 
     The ASCII Ribbon Campaign                    Hauke Fath
()     No HTML/RTF in email            Institut für Nachrichtentechnik
/\     No Word docs in email                     TU Darmstadt
     Respect for open standards              Ruf +49-6151-16-3281

Attachment: %areca-1882.diffs
Description: application/applefile

Attachment: areca-1882.diffs
Description: Binary data

Attachment: %NetBSD-6-dmesg.txt
Description: application/applefile

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_STABLE (GENERIC) #0: Mon Dec  3 15:48:42 CET 2012
        
hf@Hochstuhl:/var/obj/netbsd-builds/6/amd64/sys/arch/amd64/compile/GENERIC
total memory = 127 GB
avail memory = 124 GB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Supermicro H8DG6/H8DGi (1234567890)
mainbus0 (root)
cpu0 at mainbus0 apid 32: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu1 at mainbus0 apid 33: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu2 at mainbus0 apid 34: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu3 at mainbus0 apid 35: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu4 at mainbus0 apid 36: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu5 at mainbus0 apid 37: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu6 at mainbus0 apid 38: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu7 at mainbus0 apid 39: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu8 at mainbus0 apid 40: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu9 at mainbus0 apid 41: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu10 at mainbus0 apid 42: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu11 at mainbus0 apid 43: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu12 at mainbus0 apid 44: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu13 at mainbus0 apid 45: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu14 at mainbus0 apid 46: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
cpu15 at mainbus0 apid 47: AMD Opteron(tm) Processor 6386 SE              , id 
0x600f20
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <SMCI  ,        ,20120910>, AslId <MSFT,00000097>
ioapic0 reenabling
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
NMEM (PNP0C02) at acpi0 not configured
UMEM (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
SIOR (PNP0C02) at acpi0 not configured
UAR3 (PNP0501) at acpi0 not configured
SIO2 (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
NMEM (PNP0C02) at acpi0 not configured
UMEM (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5a10 (rev. 0x02)
vendor 0x1002 product 0x5a23 (system, subclass 0x06) at pci0 dev 0 function 2 
not configured
ppb0 at pci0 dev 4 function 0: vendor 0x1002 product 0x5a18 (rev. 0x00)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 4
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: I350 Gigabit Network Connection (rev. 0x01)
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address a0:36:9f:15:ba:f4
ukphy0 at wm0 phy 1: OUI 0x00aa00, model 0x003b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm1 at pci1 dev 0 function 1: I350 Gigabit Network Connection (rev. 0x01)
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 256 word (8 address bits) SPI EEPROM
wm1: Ethernet address a0:36:9f:15:ba:f5
ukphy1 at wm1 phy 1: OUI 0x00aa00, model 0x003b, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm2 at pci1 dev 0 function 2: I350 Gigabit Network Connection (rev. 0x01)
wm2: interrupting at ioapic0 pin 18
wm2: PCI-Express bus
wm2: 256 word (8 address bits) SPI EEPROM
wm2: Ethernet address a0:36:9f:15:ba:f6
ukphy2 at wm2 phy 1: OUI 0x00aa00, model 0x003b, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm3 at pci1 dev 0 function 3: I350 Gigabit Network Connection (rev. 0x01)
wm3: interrupting at ioapic0 pin 19
wm3: PCI-Express bus
wm3: 256 word (8 address bits) SPI EEPROM
wm3: Ethernet address a0:36:9f:15:ba:f7
ukphy3 at wm3 phy 1: OUI 0x00aa00, model 0x003b, rev. 1
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 11 function 0: vendor 0x1002 product 0x5a1f (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
arcmsr0 at pci2 dev 0 function 0
arcmsr0: interrupting at ioapic0 pin 19
ppb2 at pci0 dev 13 function 0: vendor 0x1002 product 0x5a1e (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm4 at pci3 dev 0 function 0: 82576 1000BaseT Ethernet (rev. 0x01)
wm4: interrupting at ioapic0 pin 17
wm4: PCI-Express bus
wm4: 65536 word (16 address bits) SPI EEPROM
wm4: Ethernet address 00:25:90:72:bc:00
igphy0 at wm4 phy 1: i82566 10/100/1000 media interface, rev. 1
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm5 at pci3 dev 0 function 1: 82576 1000BaseT Ethernet (rev. 0x01)
wm5: interrupting at ioapic0 pin 18
wm5: PCI-Express bus
wm5: 65536 word (16 address bits) SPI EEPROM
wm5: Ethernet address 00:25:90:72:bc:01
igphy1 at wm5 phy 1: i82566 10/100/1000 media interface, rev. 1
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 6 ports, 32 slots, CAP 
0xf722ff85<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x3d)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci4 at ppb3 bus 1
pci4: i/o space, memory space enabled
vga0 at pci4 dev 4 function 0: vendor 0x102b product 0x0532 (rev. 0x0a)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1600 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1601 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1602 (rev. 0x00)
pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1603 (rev. 0x00)
amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family15h)
pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1604 (rev. 0x00)
pchb6 at pci0 dev 24 function 5: vendor 0x1022 product 0x1605 (rev. 0x00)
pchb7 at pci0 dev 25 function 0: vendor 0x1022 product 0x1600 (rev. 0x00)
pchb8 at pci0 dev 25 function 1: vendor 0x1022 product 0x1601 (rev. 0x00)
pchb9 at pci0 dev 25 function 2: vendor 0x1022 product 0x1602 (rev. 0x00)
pchb10 at pci0 dev 25 function 3: vendor 0x1022 product 0x1603 (rev. 0x00)
amdtemp1 at pchb10: AMD CPU Temperature Sensors (Family15h)
pchb11 at pci0 dev 25 function 4: vendor 0x1022 product 0x1604 (rev. 0x00)
pchb12 at pci0 dev 25 function 5: vendor 0x1022 product 0x1605 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 100 us, pow     0 mW
acpicpu0: P0: FFH, lat   5 us, pow  7612 mW, 2800 MHz
acpicpu0: P1: FFH, lat   5 us, pow  6615 mW, 2500 MHz
acpicpu0: P2: FFH, lat   5 us, pow  5670 mW, 2200 MHz
acpicpu0: P3: FFH, lat   5 us, pow  4370 mW, 1800 MHz
acpicpu0: P4: FFH, lat   5 us, pow  3283 mW, 1400 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 4125 cycle TSC drift observed
uhub0 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 6 ports with 6 removable, self powered
uhub2 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 3 ports with 3 removable, self powered
uhub6 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
umass0 at uhub0 port 3 configuration 1 interface 0
umass0: vendor 0x05e3 USB Storage, rev 2.00/0.15, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
uhidev0 at uhub6 port 1 configuration 1 interface 0
cd0 at scsibus0 target 0 lun 0: <Slimtype, DVD A  DS8A9SH, EP52> cdrom removable
umass1 at uhub1 port 1 configuration 1 interface 0
uhidev0: Winbond Electronics Corp Hermon USB hidmouse Device, rev 1.10/0.01, 
addr 2, iclass 3/1
umass1: HP v165w, rev 2.00/40.96, addr 2
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub6 port 1 configuration 1 interface 1
uhidev1: Winbond Electronics Corp Hermon USB hidmouse Device, rev 1.10/0.01, 
addr 2, iclass 3/1
ukbd0 at uhidev1
sd0 at scsibus1 target 0 lun 0: <hp, v165w, 4096> disk removable
sd0: 3824 MB, 7872 cyl, 16 head, 63 sec, 512 bytes/sect x 7831552 sectors
sd0: GPT GUID: f069bbc6-09bc-434e-ac90-1a6f16ae1d27
dk0 at sd0: 7d4efdcd-4bb8-4a49-9f65-d1ffc7e96725
dk0: 8128 blocks at 64, type: msdos
dk1 at sd0: f6c889fe-6f95-40d2-9aab-ee42a9841b88
dk1: 511968 blocks at 8224, type: 
dk2 at sd0: 4300496f-37cc-4f4f-bfe0-e421fe4c7db4
dk2: 511968 blocks at 520224, type: 
dk3 at sd0: 5b90b79b-d2ac-4125-8840-75dd542f22f7
dk3: 225248 blocks at 1032224, type: 
dk4 at sd0: 0009c768-8b7c-442b-ae21-221a87aa6111
dk4: 585696 blocks at 1257504, type: 
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: cd0
root on cd0a dumps on cd0b
root file system type: cd9660
warning: no /dev/console
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
umass2 at uhub0 port 6 configuration 1 interface 0
umass2: HP v165w, rev 2.00/40.96, addr 3
umass2: using SCSI over Bulk-Only
scsibus2 at umass2: 2 targets, 1 lun per target
sd1 at scsibus2 target 0 lun 0: <hp, v165w, 4096> disk removable
sd1: 3824 MB, 7872 cyl, 16 head, 63 sec, 512 bytes/sect x 7831552 sectors


Home | Main Index | Thread Index | Old Index