Re: What is interrupting at ioapic0 pin 9?

To: current-users%NetBSD.org@localhost
Subject: Re: What is interrupting at ioapic0 pin 9?
From: Jukka Ruohonen <jruohonen%iki.fi@localhost>
Date: Thu, 6 Dec 2012 17:45:36 +0200
On Thu, Dec 06, 2012 at 07:20:56AM -0800, Paul Goyette wrote:
> Under heavy load (such as, build.sh -j16) my system shows a lot of 
> "system" time (30-50%, sometimes even more).  systat shows that I'm 
> getting ~140K interrupts per second on ioapic0 pin 9.
> Unfortunately, dmesg doesn't seem to indicate what device might be 
> connected to that pin!  It does show
> 
>       acpi0 at mainbus0: Intel ACPICA 20110623
>       acpi0: X/RSDT: OemId <112311,XSDT2034,20111123>, AslId 
>       <MSFT,00000097>
>       acpi0: SCI interrupting at int 9
> 
> but I can't imagine ACPI generating that quantity of interrupts!

It may when configured incorrectly. Verify against hw.acpi.stat.sci -sysctl.

- Jukka.

> 
> Any clues?  (The entire dmesg is attached.)
> 
> -------------------------------------------------------------------------
> | Paul Goyette     | PGP Key fingerprint:     | E-mail addresses:       |
> | Customer Service | FA29 0E3B 35AF E8AE 6651 | paul at whooppee.com    |
> | Network Engineer | 0786 F758 55DE 53BA 7731 | pgoyette at juniper.net |
> | Kernel Developer |                          | pgoyette at netbsd.org  |
> -------------------------------------------------------------------------

> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 6.99.14 (WHOOPPEE (shared) 2012-10-20 17:00:50) #52: Sat Oct 20 
> 10:04:12 PDT 2012
>       
> paul%screamer.whooppee.com@localhost:/build/netbsd-local/obj/amd64/sys/arch/amd64/compile/WHOOPPEE
> total memory = 32767 MB
> avail memory = 31810 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> System manufacturer System Product Name (System Version)
> mainbus0 (root)
> ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 
> 0x0000000000000000/0x1 (20110623/tbfadt-586)
> cpu0 at mainbus0 apid 16: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu1 at mainbus0 apid 17: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu2 at mainbus0 apid 18: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu3 at mainbus0 apid 19: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu4 at mainbus0 apid 20: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu5 at mainbus0 apid 21: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu6 at mainbus0 apid 22: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu7 at mainbus0 apid 23: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu8 at mainbus0 apid 24: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu9 at mainbus0 apid 25: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu10 at mainbus0 apid 26: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu11 at mainbus0 apid 27: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu12 at mainbus0 apid 32: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu13 at mainbus0 apid 33: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu14 at mainbus0 apid 34: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu15 at mainbus0 apid 35: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu16 at mainbus0 apid 36: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu17 at mainbus0 apid 37: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu18 at mainbus0 apid 38: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu19 at mainbus0 apid 39: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu20 at mainbus0 apid 40: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu21 at mainbus0 apid 41: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu22 at mainbus0 apid 42: AMD Opteron(tm) Processor 6172, id 0x100f91
> cpu23 at mainbus0 apid 43: AMD Opteron(tm) Processor 6172, id 0x100f91
> ioapic0 at mainbus0 apid 44: pa 0xfec00000, version 21, 24 pins
> ioapic0: can't remap to apid 44
> ioapic1 at mainbus0 apid 45: pa 0xfec20000, version 21, 32 pins
> ioapic1: can't remap to apid 45
> acpi0 at mainbus0: Intel ACPICA 20110623
> acpi0: X/RSDT: OemId <112311,XSDT2034,20111123>, AslId <MSFT,00000097>
> acpi0: SCI interrupting at int 9
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> NMEM (PNP0C02) at acpi0 not configured
> UMEM (PNP0C02) at acpi0 not configured
> attimer0 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
> pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
> midi0 at pcppi0: PC speaker
> sysbeep0 at pcppi0
> SIOR (PNP0C02) at acpi0 not configured
> HPET (PNP0103) at acpi0 not configured
> OMSC (PNP0C02) at acpi0 not configured
> RMSC (PNP0C02) at acpi0 not configured
> com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
> com0: ns16550a, working fifo
> com1 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
> com1: ns16550a, working fifo
> PCIE (PNP0C02) at acpi0 not configured
> RMEM (PNP0C01) at acpi0 not configured
> PWRB (PNP0C0C) at acpi0 not configured
> attimer0: attached to pcppi0
> ipmi: bus_space_map(..., ca0, 2, 0, 0xffffffff806f8b98) failed
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5a10 (rev. 0x02)
> ppb0 at pci0 dev 2 function 0: vendor 0x1002 product 0x5a16 (rev. 0x00)
> ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> x16 @ 5.0Gb/s
> > x16 @ 2.5Gb/s
> pci1 at ppb0 bus 5
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x95c5 (rev. 0x00)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> radeondrm0 at vga0: ATI Radeon HD 3450
> radeondrm0: Initialized radeon 1.29.0 20080613
> vendor 0x1002 product 0xaa28 (HD audio multimedia) at pci1 dev 0 function 1 
> not configured
> ppb1 at pci0 dev 9 function 0: vendor 0x1002 product 0x5a1c (rev. 0x00)
> ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x2 @ 5.0Gb/s
> > x1 @ 2.5Gb/s
> pci2 at ppb1 bus 4
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> wm0 at pci2 dev 0 function 0: Intel i82574L (rev. 0x00)
> wm0: interrupting at ioapic1 pin 24
> wm0: PCI-Express bus
> wm0: 256 word (8 address bits) SPI EEPROM
> wm0: Ethernet address bc:ae:c5:30:d9:8a
> ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x000b, rev. 1
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-FDX, auto
> ppb2 at pci0 dev 10 function 0: vendor 0x1002 product 0x5a1d (rev. 0x00)
> ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex> x2 @ 5.0Gb/s
> > x1 @ 2.5Gb/s
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> wm1 at pci3 dev 0 function 0: Intel i82574L (rev. 0x00)
> wm1: interrupting at ioapic1 pin 23
> wm1: PCI-Express bus
> wm1: 256 word (8 address bits) SPI EEPROM
> wm1: Ethernet address bc:ae:c5:30:da:51
> ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x000b, rev. 1
> ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-FDX, auto
> ppb3 at pci0 dev 11 function 0: vendor 0x1002 product 0x5a1f (rev. 0x00)
> ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex> x16 @ 5.0Gb/s
> > x1 @ 2.5Gb/s
> pci4 at ppb3 bus 2
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> jmide0 at pci4 dev 0 function 0: vendor 0x197b product 0x2363 (rev. 0x02)
> jmide0: 1 PATA port, 2 SATA ports
> jmide0: interrupting at ioapic1 pin 8
> ahcisata1 at jmide0
> ahcisata1: AHCI revision 1.0, 2 ports, 32 slots, CAP 
> 0xc722ff01<PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
> atabus8 at ahcisata1 channel 0
> atabus9 at ahcisata1 channel 1
> jmide0: PCI IDE interface used
> jmide0: bus-master DMA support present
> jmide0: primary channel wired to native-PCI mode
> jmide0: primary channel is unused
> jmide0: secondary channel wired to native-PCI mode
> jmide0: secondary channel is PATA
> atabus10 at jmide0 channel 1
> ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
> ahcisata0: interrupting at ioapic0 pin 22
> ahcisata0: 64-bit DMA
> ahcisata0: AHCI revision 1.10, 6 ports, 32 slots, CAP 
> 0xf722ff85<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
> atabus0 at ahcisata0 channel 0
> atabus1 at ahcisata0 channel 1
> atabus2 at ahcisata0 channel 2
> atabus3 at ahcisata0 channel 3
> atabus4 at ahcisata0 channel 4
> atabus5 at ahcisata0 channel 5
> ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
> ohci0: interrupting at ioapic0 pin 16
> ohci0: OHCI version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
> ohci1: interrupting at ioapic0 pin 16
> ohci1: OHCI version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
> ehci0: interrupting at ioapic0 pin 17
> ehci0: dropped intr workaround enabled
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 3 ports each: ohci0 ohci1
> usb2 at ehci0: USB revision 2.0
> ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
> ohci2: interrupting at ioapic0 pin 18
> ohci2: OHCI version 1.0, legacy support
> usb3 at ohci2: USB revision 1.0
> ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
> ohci3: interrupting at ioapic0 pin 18
> ohci3: OHCI version 1.0, legacy support
> usb4 at ohci3: USB revision 1.0
> ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
> ehci1: interrupting at ioapic0 pin 19
> ehci1: dropped intr workaround enabled
> ehci1: EHCI version 1.0
> ehci1: companion controllers, 3 ports each: ohci2 ohci3
> usb5 at ehci1: USB revision 2.0
> piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x3d)
> piixpm0: interrupting at SMI, polling
> iic0 at piixpm0: I2C bus
> ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
> 0x00)
> ixpide0: bus-master DMA support present
> ixpide0: primary channel configured to compatibility mode
> ixpide0: primary channel interrupting at ioapic0 pin 14
> atabus6 at ixpide0 channel 0
> ixpide0: secondary channel configured to compatibility mode
> ixpide0: secondary channel interrupting at ioapic0 pin 15
> atabus7 at ixpide0 channel 1
> pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
> ppb4 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
> pci5 at ppb4 bus 1
> pci5: i/o space, memory space enabled
> fwohci0 at pci5 dev 2 function 0: vendor 0x11c1 product 0x5811 (rev. 0x70)
> fwohci0: interrupting at ioapic0 pin 20
> fwohci0: OHCI version 1.0 (ROM=1)
> fwohci0: No. of Isochronous channels is 8.
> fwohci0: EUI64 00:1f:c6:00:00:09:00:c5
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> ieee1394if0 at fwohci0: IEEE1394 bus
> fwip0 at ieee1394if0: IP over IEEE1394
> fwohci0: Initiate bus reset
> ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
> ohci4: interrupting at ioapic0 pin 18
> ohci4: OHCI version 1.0, legacy support
> usb6 at ohci4: USB revision 1.0
> pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
> pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
> pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
> amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
> pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
> pchb5 at pci0 dev 25 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
> pchb6 at pci0 dev 25 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
> pchb7 at pci0 dev 25 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
> amdnb_misc1 at pci0 dev 25 function 3: AMD NB Misc Configuration
> pchb8 at pci0 dev 25 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
> pchb9 at pci0 dev 26 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
> pchb10 at pci0 dev 26 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
> pchb11 at pci0 dev 26 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
> amdnb_misc2 at pci0 dev 26 function 3: AMD NB Misc Configuration
> pchb12 at pci0 dev 26 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
> pchb13 at pci0 dev 27 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
> pchb14 at pci0 dev 27 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
> pchb15 at pci0 dev 27 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
> amdnb_misc3 at pci0 dev 27 function 3: AMD NB Misc Configuration
> pchb16 at pci0 dev 27 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
> isa0 at pcib0
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
> ieee1394if0: bus manager 0
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> timecounter: Timecounter "TSC" frequency 2100168740 Hz quality 3000
> uhub0 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> uhub1 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> uhub2 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 3 ports with 3 removable, self powered
> uhub3 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 3 ports with 3 removable, self powered
> uhub4 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 6 ports with 6 removable, self powered
> uhub5 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub5: 2 ports with 2 removable, self powered
> uhub6 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub6: 6 ports with 6 removable, self powered
> ahcisata1 port 0: device present, speed: 1.5Gb/s
> ahcisata0 port 0: device present, speed: 3.0Gb/s
> ahcisata0 port 1: device present, speed: 3.0Gb/s
> ahcisata0 port 2: device present, speed: 3.0Gb/s
> ahcisata0 port 3: device present, speed: 3.0Gb/s
> ahcisata0 port 4: device present, speed: 3.0Gb/s
> ahcisata0 port 5: device present, speed: 3.0Gb/s
> atapibus0 at atabus8: 1 targets
> cd0 at atapibus0 drive 0: <Optiarc DVD RW AD-7261S, , 1.01> cdrom removable
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> cd0(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 
> (Ultra/100) (using DMA)
> wd0 at atabus0 drive 0
> wd0: <ST3250318AS>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133) (using DMA)
> wd1 at atabus1 drive 0
> wd1: <ST3250318AS>
> wd1: drive supports 16-sector PIO transfers, LBA48 addressing
> wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133) (using DMA)
> wd2 at atabus2 drive 0
> wd2: <WDC WD5000AADS-00M2B0>
> wd2: drive supports 16-sector PIO transfers, LBA48 addressing
> wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133) (using DMA)
> wd3 at atabus3 drive 0
> wd3: <WDC WD5000AADS-00M2B0>
> wd3: drive supports 16-sector PIO transfers, LBA48 addressing
> wd3: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133) (using DMA)
> wd4 at atabus4 drive 0
> wd4: <WDC WD5000AAKS-00TMA0>
> wd4: drive supports 16-sector PIO transfers, LBA48 addressing
> wd4: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd4(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133) (using DMA)
> wd5 at atabus5 drive 0
> wd5: <WDC WD1600AAJS-00L7A0>
> wd5: drive supports 16-sector PIO transfers, LBA48 addressing
> wd5: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
> wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd5(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133) (using DMA)
> swwdog0: software watchdog initialized
> Kernelized RAIDframe activated
> raid0: RAID Level 1
> raid0: Components: /dev/wd0e /dev/wd1e
> raid0: Total Sectors: 488395008 (238474 MB)
> raid1: RAID Level 1
> raid1: Components: /dev/wd2e /dev/wd3e
> raid1: Total Sectors: 976770944 (476938 MB)
> boot device: raid0
> root on raid0a dumps on raid0b
> ugen0 at uhub1 port 1
> ugen0: American Power Conversion Back-UPS BX1300G FW:864.L1 .D USB FW:L1, rev 
> 2.00/0.90, addr 2
> raid0: Device already configured!
> raid1: Device already configured!
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> Accounting started
> NMEM (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> UMEM (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> SIOR (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> HPET (PNP0103) [HPET Timer] at acpi0 not configured
> OMSC (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> RMSC (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> PCIE (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> RMEM (PNP0C01) [System Board] at acpi0 not configured
> acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: HLT, lat   0 us, pow     0 mW
> acpicpu0: P0: FFH, lat   4 us, pow  7177 mW, 2100 MHz
> acpicpu0: P1: FFH, lat   4 us, pow  5706 mW, 1700 MHz
> acpicpu0: P2: FFH, lat   4 us, pow  4700 mW, 1400 MHz
> acpicpu0: P3: FFH, lat   4 us, pow  3802 mW, 1100 MHz
> acpicpu0: P4: FFH, lat   4 us, pow  3040 mW,  800 MHz
> acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
> acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
> acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
> acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
> acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
> acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
> acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
> acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
> acpicpu1 at cpu1: ACPI CPU
> acpicpu2 at cpu2: ACPI CPU
> acpicpu3 at cpu3: ACPI CPU
> acpicpu4 at cpu4: ACPI CPU
> acpicpu5 at cpu5: ACPI CPU
> acpicpu6 at cpu6: ACPI CPU
> acpicpu7 at cpu7: ACPI CPU
> acpicpu8 at cpu8: ACPI CPU
> acpicpu9 at cpu9: ACPI CPU
> acpicpu10 at cpu10: ACPI CPU
> acpicpu11 at cpu11: ACPI CPU
> acpicpu12 at cpu12: ACPI CPU
> acpicpu13 at cpu13: ACPI CPU
> acpicpu14 at cpu14: ACPI CPU
> acpicpu15 at cpu15: ACPI CPU
> acpicpu16 at cpu16: ACPI CPU
> acpicpu17 at cpu17: ACPI CPU
> acpicpu18 at cpu18: ACPI CPU
> acpicpu19 at cpu19: ACPI CPU
> acpicpu20 at cpu20: ACPI CPU
> acpicpu21 at cpu21: ACPI CPU
> acpicpu22 at cpu22: ACPI CPU
> acpicpu23 at cpu23: ACPI CPU
> amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
> amdtemp1 at amdnb_misc1: AMD CPU Temperature Sensors (Family10h)
> amdtemp2 at amdnb_misc2: AMD CPU Temperature Sensors (Family10h)
> amdtemp3 at amdnb_misc3: AMD CPU Temperature Sensors (Family10h)
> hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
> hdaudio0: interrupting at ioapic1 pin 1
> hdafg at hdaudio0 not configured
> hdafg0 at hdaudio0: ATI R6xx HDMI
> hdafg0: HDMI00 2ch: Digital Out [Jack]
> hdafg0: 2ch/0ch 48000Hz PCM16 AC3
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> NMEM (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> UMEM (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> SIOR (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> OMSC (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> RMSC (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> PCIE (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
> RMEM (PNP0C01) [System Board] at acpi0 not configured
> info: [drm] Setting GART location based on new memory map
> info: [drm] Loading RV620 Microcode
> info: [drm] Resetting GPU
> info: [drm] writeback test succeeded in 1 usecs
> radeondrm0: interrupting at ioapic1 pin 0
> uhidev0 at uhub1 port 2 configuration 1 interface 0
> uhidev0: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 3, iclass 3/1
> ukbd0 at uhidev0
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 2 configuration 1 interface 1
> uhidev1: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 3, iclass 3/1
> ums0 at uhidev1: 5 buttons and Z dir
> wsmouse0 at ums0 mux 0
> wskbd1: disconnecting from wsdisplay0
> wskbd1: detached
> ukbd0: detached
> uhidev0: detached
> uhidev0: at uhub1 port 2 (addr 3) disconnected
> wsmouse0: detached
> ums0: detached
> uhidev1: detached
> uhidev1: at uhub1 port 2 (addr 3) disconnected
> uhidev0 at uhub1 port 2 configuration 1 interface 0
> uhidev0: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 3, iclass 3/1
> ukbd0 at uhidev0
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 2 configuration 1 interface 1
> uhidev1: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 3, iclass 3/1
> ums0 at uhidev1: 5 buttons and Z dir
> wsmouse0 at ums0 mux 0
> umass0 at uhub4 port 2 configuration 1 interface 0
> umass0: SAMSUNG SAMSUNG_Android, rev 2.00/4.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 2 luns per target
> sd0 at scsibus0 target 0 lun 0: <SAMSUNG, LTE, 0001> disk removable
> sd0: drive offline
> sd0: unable to open device, error = 19
> sd1 at scsibus0 target 0 lun 1: <SAMSUNG, LTE Card, 0001> disk removable
> sd1: drive offline
> sd1: unable to open device, error = 19
> sd0: detached
> sd1: detached
> scsibus0: detached
> umass0: detached
> umass0: at uhub4 port 2 (addr 2) disconnected
> umass0 at uhub4 port 2 configuration 1 interface 0
> umass0: SAMSUNG SAMSUNG_Android, rev 2.00/4.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 2 luns per target
> sd0 at scsibus0 target 0 lun 0: <SAMSUNG, LTE, 0001> disk removable
> sd0: drive offline
> sd0: unable to open device, error = 19
> sd1 at scsibus0 target 0 lun 1: <SAMSUNG, LTE Card, 0001> disk removable
> sd1: drive offline
> sd1: unable to open device, error = 19
> sd0: detached
> sd1: detached
> scsibus0: detached
> umass0: detached
> umass0: at uhub4 port 2 (addr 2) disconnected
> umass0 at uhub4 port 2 configuration 1 interface 0
> umass0: SAMSUNG SAMSUNG_Android, rev 2.00/4.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 2 luns per target
> sd0 at scsibus0 target 0 lun 0: <SAMSUNG, LTE, 0001> disk removable
> sd0: drive offline
> sd0: unable to open device, error = 19
> sd1 at scsibus0 target 0 lun 1: <SAMSUNG, LTE Card, 0001> disk removable
> sd1: drive offline
> sd1: unable to open device, error = 19
> sd0: detached
> sd1: detached
> scsibus0: detached
> umass0: detached
> umass0: at uhub4 port 2 (addr 2) disconnected
> ugen1 at uhub4 port 2
> ugen1: SAMSUNG SAMSUNG_Android, rev 2.00/4.00, addr 2
> usbd_set_config_index: illegal index
> ugen1: setting configuration index 0 failed
> ugen1: detached
> ugen1: at uhub4 port 2 (addr 2) disconnected
> umass0 at uhub4 port 2 configuration 1 interface 0
> umass0: SAMSUNG SAMSUNG_Android, rev 2.00/4.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 2 luns per target
> sd0 at scsibus0 target 0 lun 0: <SAMSUNG, LTE, 0001> disk removable
> sd0: drive offline
> sd0: unable to open device, error = 19
> sd1 at scsibus0 target 0 lun 1: <SAMSUNG, LTE Card, 0001> disk removable
> sd1: drive offline
> sd1: unable to open device, error = 19
> sd0: detached
> sd1: detached
> scsibus0: detached
> umass0: detached
> umass0: at uhub4 port 2 (addr 2) disconnected
> umass0 at uhub4 port 2 configuration 1 interface 0
> umass0: SAMSUNG SAMSUNG_Android, rev 2.00/4.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 2 luns per target
> sd0 at scsibus0 target 0 lun 0: <SAMSUNG, LTE, 0001> disk removable
> sd0: drive offline
> sd0: unable to open device, error = 19
> sd1 at scsibus0 target 0 lun 1: <SAMSUNG, LTE Card, 0001> disk removable
> sd1: drive offline
> sd1: unable to open device, error = 19
> sd0: detached
> sd1: detached
> scsibus0: detached
> umass0: detached
> umass0: at uhub4 port 2 (addr 2) disconnected
Follow-Ups:
- Re: What is interrupting at ioapic0 pin 9?
  - From: Paul Goyette
References:
- What is interrupting at ioapic0 pin 9?
  - From: Paul Goyette
Prev by Date: Re: What is interrupting at ioapic0 pin 9?
Next by Date: Build breack for port evbarm-el
Previous by Thread: Re: What is interrupting at ioapic0 pin 9?
Next by Thread: Re: What is interrupting at ioapic0 pin 9?
Indexes:
Home | Main Index | Thread Index | Old Index