Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Panic on intr_disestablish
With a -current kernel, options DEBUG, LOCKDEBUG and INTRDEBUG I get
a protection fault on shutdown. Somehow the "is_pic" entry contains
garbage.
Machine is IBM xSeries 336, arch is amd64.
Dmesg attached, any ideas anyone?
--
J. Hannken-Illjes - hannken%eis.cs.tu-bs.de@localhost - TU Braunschweig (Germany)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.30 (work.amd64) #0: Fri Jun 17 18:25:53 MEST 2016
hannken%builder.isf.cs.tu-bs.de@localhost:/work/build/obj/obj.amd64/sys/arch/amd64/compile/work.amd64
total memory = 16383 MB
avail memory = 15871 MB
Random seed data path=/var/db/entropy-file len=536 pa=2604000
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.3 @ 0xf5f9e (52 entries)
IBM eserver xSeries 336 -[883721Y]-
mainbus0 (root)
efi: missing or invalid systbl
ACPI: RSDP 0x00000000000FDFB0 000024 (v02 IBM )
ACPI: XSDT 0x00000000D7FCFF00 00003C (v01 IBM SERONYXP 00001001 IBM 45444F43)
ACPI: FACP 0x00000000D7FCFE40 000084 (v02 IBM SERONYXP 00001001 IBM 45444F43)
ACPI: DSDT 0x00000000D7FCCF00 002346 (v02 IBM SERTURQU 00001000 INTL 20041203)
ACPI: FACS 0x00000000D7FCFD00 000040
ACPI: APIC 0x00000000D7FCFD80 00009C (v01 IBM SERONYXP 00001001 IBM 45444F43)
ACPI: MCFG 0x00000000D7FCFD40 00003C (v01 IBM SERONYXP 00001001 IBM 45444F43)
ACPI: 1 ACPI AML tables successfully acquired and loaded
efi: missing or invalid systbl
ioapic0 at mainbus0 apid 14: pa 0xfec00000, version 0x20, 24 pins
ioapic1 at mainbus0 apid 13: pa 0xfec82000, version 0x20, 24 pins
ioapic2 at mainbus0 apid 12: pa 0xfec82400, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: 32 page colors
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz, id 0xf41
cpu0: PAT enabled
cpu1 at mainbus0 apid 6
cpu1: 2 page colors
x86_ipi_init: ESR 00000040
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz, id 0xf41
cpu1: PAT enabled
cpu2 at mainbus0 apid 1
cpu2: 2 page colors
cpu2: Intel(R) Xeon(TM) CPU 3.20GHz, id 0xf41
cpu2: PAT enabled
cpu3 at mainbus0 apid 7
cpu3: 2 page colors
cpu3: Intel(R) Xeon(TM) CPU 3.20GHz, id 0xf41
cpu3: PAT enabled
acpi0 at mainbus0: Intel ACPICA 20160422
efi: missing or invalid systbl
acpi0: X/RSDT: OemId <IBM ,SERONYXP,00001001>, AslId <IBM ,45444f43>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
acpi0: MCFG: segment 0, bus 0-7, address 0x00000000e0000000
MCFG: MEMMAP: 0x0000000000000000-0x000000000009d3ff, size=0x000000000009d400, type=1(Memory)
MCFG: MEMMAP: 0x000000000009d400-0x000000000009ffff, size=0x0000000000002c00, type=2(Reserved)
MCFG: MEMMAP: 0x00000000000e0000-0x00000000000fffff, size=0x0000000000020000, type=2(Reserved)
MCFG: MEMMAP: 0x0000000000100000-0x00000000d7fcceff, size=0x00000000d7eccf00, type=1(Memory)
MCFG: MEMMAP: 0x00000000d7fd0000-0x00000000d7ffffff, size=0x0000000000030000, type=2(Reserved)
MCFG: MEMMAP: 0x00000000d7fccf00-0x00000000d7fcffff, size=0x0000000000003100, type=3(ACPI)
MCFG: MEMMAP: 0x0000000100000000-0x0000000427ffffff, size=0x0000000328000000, type=1(Memory)
MCFG: MEMMAP: 0x00000000e0000000-0x00000000efffffff, size=0x0000000010000000, type=2(Reserved)
acpi0: MCFG: segment 0, bus 0-7, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpi0: ACPI-Fast 24-bit timer
SIOM (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x64,0x60 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
COM2 (PNP0501) at acpi0 not configured
PIC2 (PNP0003) at acpi0 not configured
PIC3 (PNP0003) at acpi0 not configured
PIC4 (PNP0003) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SBD1 (PNP0C02) at acpi0 not configured
pckbdprobe: reset error 5
pmsprobe: reset error 5
attimer1: attached to pcppi1
ipmi0 at mainbus0
ipmi0: WARNING: power management not supported
pci0 at mainbus0 bus 0: configuration mode 1
acpi0: MCFG: 000:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:00:1: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:02:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:04:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:06:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:07:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:08:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:29:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:29:1: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:29:7: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:30:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:31:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:31:2: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:31:3: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: bus 0: no valid devices.
acpi0: acpimcfg_map_bus done
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 3590 (rev. 0x0c)
vendor 8086 product 3591 (undefined, subclass 0x00, revision 0x0c) at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0: vendor 8086 product 3595 (rev. 0x0c)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x8 @ 2.5GT/s
pci1 at ppb0 bus 2
acpi0: MCFG: bus 2: no valid devices.
acpi0: acpimcfg_map_bus done
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 4 function 0: vendor 8086 product 3597 (rev. 0x0c)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x8 @ 2.5GT/s
pci2 at ppb1 bus 3
acpi0: MCFG: 003:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 003:00:2: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: bus 3: no valid devices.
acpi0: acpimcfg_map_bus done
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 8086 product 0329 (rev. 0x09)
ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
ppb2: disabling notification events
pci3 at ppb2 bus 4
acpi0: MCFG: 004:01:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: bus 4: no valid devices.
acpi0: acpimcfg_map_bus done
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mpt0 at pci3 dev 1 function 0: vendor 1000 product 0030 (rev. 0x08)
allocated pic ioapic1 type level pin 4 level 6 to cpu0 slot 1 idt entry 97
mpt0: interrupting at ioapic1 pin 4
scsibus0 at mpt0: 16 targets, 8 luns per target
mpt0: WARNING: power management not supported
ppb3 at pci2 dev 0 function 2: vendor 8086 product 032a (rev. 0x09)
ppb3: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
ppb3: disabling notification events
pci4 at ppb3 bus 5
acpi0: MCFG: bus 5: no valid devices.
acpi0: acpimcfg_map_bus done
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 6 function 0: vendor 8086 product 3599 (rev. 0x0c)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x8 @ 2.5GT/s
pci5 at ppb4 bus 6
acpi0: MCFG: 006:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: bus 6: no valid devices.
acpi0: acpimcfg_map_bus done
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci5 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 2 idt entry 98
bge0: interrupting at ioapic0 pin 16
bge0: HW config 000801d1, 00010011, 00000008, 00000000 00000000
bge0: ASIC BCM5750 B1 (0x4101), Ethernet address 00:11:25:a9:63:32
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb5 at pci0 dev 7 function 0: vendor 8086 product 359a (rev. 0x0c)
ppb5: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci6 at ppb5 bus 7
acpi0: MCFG: 007:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: bus 7: no valid devices.
acpi0: acpimcfg_map_bus done
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci6 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 2 idt entry 98
bge1: interrupting at ioapic0 pin 16
bge1: HW config 000801d1, 00010011, 00000008, 00000000 00000000
bge1: ASIC BCM5750 B1 (0x4101), Ethernet address 00:11:25:a9:63:33
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vendor 8086 product 359b (miscellaneous system, revision 0x0c) at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 8086 product 24d2 (rev. 0x02)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 2 idt entry 98
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
usb0: WARNING: power management not supported
uhci1 at pci0 dev 29 function 1: vendor 8086 product 24d4 (rev. 0x02)
allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 3 idt entry 99
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
usb1: WARNING: power management not supported
ehci0 at pci0 dev 29 function 7: vendor 8086 product 24dd (rev. 0x02)
allocated pic ioapic0 type level pin 23 level 6 to cpu0 slot 4 idt entry 100
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
usb2: WARNING: power management not supported
ppb6 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xc2)
pci7 at ppb6 bus 1
acpi0: MCFG: 001:01:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: bus 1: no valid devices.
acpi0: acpimcfg_map_bus done
pci7: i/o space, memory space enabled
vga0 at pci7 dev 1 function 0: vendor 1002 product 5159 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 24d0 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
gpio0 at ichlpcib0: 64 pins
ichlpcib0: fwh: data 04,00, id 04,00
piixide0 at pci0 dev 31 function 2: Intel 82801EB Serial ATA Controller (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 14 level 6 to cpu0 slot 5 idt entry 101
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 15 level 6 to cpu0 slot 6 idt entry 102
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 24d3 (rev. 0x02)
ichsmb0: can't map I/O space
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
allocated pic ioapic0 type edge pin 4 level 8 to cpu0 slot 7 idt entry 129
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: id 0, lapic id 0, cap 0x03fc, flags 0x00080e31
acpicpu1 at cpu1: ACPI CPU
acpicpu1: id 1, lapic id 6, cap 0x03fc, flags 0x00080e31
acpicpu2 at cpu2: ACPI CPU
acpicpu2: id 2, lapic id 1, cap 0x03fc, flags 0x00080e31
acpicpu3 at cpu3: ACPI CPU
acpicpu3: id 3, lapic id 7, cap 0x03fc, flags 0x00080e31
cpu0: interrupt masks:
IPL 0 mask 01ffff00 unmask fe0000ff
IPL 1 mask 03ffff00 unmask fc0000ff
IPL 2 mask 07ffff00 unmask f80000ff
IPL 3 mask 0fffff00 unmask f00000ff
IPL 4 mask 1fffff00 unmask e00000ff
IPL 5 mask 3fffff00 unmask c00000ff
IPL 6 mask 3fffff7f unmask c0000080
IPL 7 mask 7fffff7f unmask 80000080
IPL 8 mask ffffffff unmask 00000000
cpu0 source 0 is pin 9 from pic ioapic0 type 3 maxlevel 6
handler 0xffffffff801335c1 level 6
ioapic redir 0x8000
cpu0 source 1 is pin 4 from pic ioapic1 type 3 maxlevel 6
handler 0xffffffff801335c1 level 6
ioapic redir 0xa000
cpu0 source 2 is pin 16 from pic ioapic0 type 3 maxlevel 6
handler 0xffffffff801335c1 level 6
handler 0xffffffff801335c1 level 6
handler 0xffffffff801335c1 level 6
ioapic redir 0xa000
cpu0 source 3 is pin 19 from pic ioapic0 type 3 maxlevel 6
handler 0xffffffff801335c1 level 6
ioapic redir 0xa000
cpu0 source 4 is pin 23 from pic ioapic0 type 3 maxlevel 6
handler 0xffffffff801335c1 level 6
ioapic redir 0xa000
cpu0 source 5 is pin 14 from pic ioapic0 type 2 maxlevel 6
handler 0xffffffff801335c1 level 6
ioapic redir 0x0
cpu0 source 6 is pin 15 from pic ioapic0 type 2 maxlevel 6
handler 0xffffffff801335c1 level 6
ioapic redir 0x0
cpu0 source 7 is pin 4 from pic ioapic0 type 2 maxlevel 8
handler 0xffffffff804b351c level 8
ioapic redir 0x0
cpu0 source 25 is pin 0 from pic softintr_fakepic type 0 maxlevel 1
handler 0x0 level 1
cpu0 source 26 is pin 0 from pic softintr_fakepic type 0 maxlevel 2
handler 0x0 level 2
cpu0 source 27 is pin 0 from pic softintr_fakepic type 0 maxlevel 3
handler 0x0 level 3
cpu0 source 28 is pin 0 from pic softintr_fakepic type 0 maxlevel 4
handler 0x0 level 4
cpu0 source 29 is pin 0 from pic softintr_fakepic type 0 maxlevel 5
handler 0x0 level 5
cpu0 source 30 is pin 0 from pic lapic type 0 maxlevel 7
handler 0x0 level 7
cpu0 source 31 is pin 0 from pic lapic type 0 maxlevel 8
handler 0x0 level 8
cpu1: interrupt masks:
IPL 0 mask 01ffffff unmask fe000000
IPL 1 mask 03ffffff unmask fc000000
IPL 2 mask 07ffffff unmask f8000000
IPL 3 mask 0fffffff unmask f0000000
IPL 4 mask 1fffffff unmask e0000000
IPL 5 mask 3fffffff unmask c0000000
IPL 6 mask 3fffffff unmask c0000000
IPL 7 mask 7fffffff unmask 80000000
IPL 8 mask ffffffff unmask 00000000
cpu1 source 25 is pin 0 from pic softintr_fakepic type 0 maxlevel 1
handler 0x0 level 1
cpu1 source 26 is pin 0 from pic softintr_fakepic type 0 maxlevel 2
handler 0x0 level 2
cpu1 source 27 is pin 0 from pic softintr_fakepic type 0 maxlevel 3
handler 0x0 level 3
cpu1 source 28 is pin 0 from pic softintr_fakepic type 0 maxlevel 4
handler 0x0 level 4
cpu1 source 29 is pin 0 from pic softintr_fakepic type 0 maxlevel 5
handler 0x0 level 5
cpu1 source 30 is pin 0 from pic lapic type 0 maxlevel 7
handler 0x0 level 7
cpu1 source 31 is pin 0 from pic lapic type 0 maxlevel 8
handler 0x0 level 8
cpu2: interrupt masks:
IPL 0 mask 01ffffff unmask fe000000
IPL 1 mask 03ffffff unmask fc000000
IPL 2 mask 07ffffff unmask f8000000
IPL 3 mask 0fffffff unmask f0000000
IPL 4 mask 1fffffff unmask e0000000
IPL 5 mask 3fffffff unmask c0000000
IPL 6 mask 3fffffff unmask c0000000
IPL 7 mask 7fffffff unmask 80000000
IPL 8 mask ffffffff unmask 00000000
cpu2 source 25 is pin 0 from pic softintr_fakepic type 0 maxlevel 1
handler 0x0 level 1
cpu2 source 26 is pin 0 from pic softintr_fakepic type 0 maxlevel 2
handler 0x0 level 2
cpu2 source 27 is pin 0 from pic softintr_fakepic type 0 maxlevel 3
handler 0x0 level 3
cpu2 source 28 is pin 0 from pic softintr_fakepic type 0 maxlevel 4
handler 0x0 level 4
cpu2 source 29 is pin 0 from pic softintr_fakepic type 0 maxlevel 5
handler 0x0 level 5
cpu2 source 30 is pin 0 from pic lapic type 0 maxlevel 7
handler 0x0 level 7
cpu2 source 31 is pin 0 from pic lapic type 0 maxlevel 8
handler 0x0 level 8
cpu3: interrupt masks:
IPL 0 mask 01ffffff unmask fe000000
IPL 1 mask 03ffffff unmask fc000000
IPL 2 mask 07ffffff unmask f8000000
IPL 3 mask 0fffffff unmask f0000000
IPL 4 mask 1fffffff unmask e0000000
IPL 5 mask 3fffffff unmask c0000000
IPL 6 mask 3fffffff unmask c0000000
IPL 7 mask 7fffffff unmask 80000000
IPL 8 mask ffffffff unmask 00000000
cpu3 source 25 is pin 0 from pic softintr_fakepic type 0 maxlevel 1
handler 0x0 level 1
cpu3 source 26 is pin 0 from pic softintr_fakepic type 0 maxlevel 2
handler 0x0 level 2
cpu3 source 27 is pin 0 from pic softintr_fakepic type 0 maxlevel 3
handler 0x0 level 3
cpu3 source 28 is pin 0 from pic softintr_fakepic type 0 maxlevel 4
handler 0x0 level 4
cpu3 source 29 is pin 0 from pic softintr_fakepic type 0 maxlevel 5
handler 0x0 level 5
cpu3 source 30 is pin 0 from pic lapic type 0 maxlevel 7
handler 0x0 level 7
cpu3 source 31 is pin 0 from pic lapic type 0 maxlevel 8
handler 0x0 level 8
Initializing SSP: 3e845841c088e504 d18614602537cd71 51cc103b9cdfd3fb bd0bb2ae1e066d44 d327b15b08a3b638 288bf5984c3dacd8 3ad910cbad8fc080 c7bd63a22df9e8e
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: TSC skew=160 drift=8
cpu2: TSC skew=-296 drift=304
cpu3: TSC skew=-1076 drift=1192
cpu1: running
cpu2: running
cpu3: running
TSC not known invariant on this CPU
scsibus0: waiting 2 seconds for devices to settle...
acpicpu3: ACPI CPUs started
atapibus0 at atabus0: 2 targets
uhub0 at usb2: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8083N, , 0L02> cdrom removable
uhub2 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2IPsec: Initialized Security Association Processing.
, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0 at scsibus0 target 0 lun 0: <IBM-ESXS, ST3300007LC FN, B26B> disk fixed
sd0: 279 GB, 90774 cyl, 8 head, 806 sec, 512 bytes/sect x 585937500 sectors
sd0: sync (6.25ns offset 63), 16-bit (320.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <IBM-ESXS, GNS300C3ESTT0ZFN, JP83> disk fixed
sd1: 279 GB, 81782 cyl, 8 head, 895 sec, 512 bytes/sect x 585937500 sectors
sd1: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 8 lun 0: <IBM, 25P3495a S320 1, 1> processor fixed
ses0: SAF-TE Compliant Device
ses0: WARNING: power management not supported
ses0: async, 8-bit transfers
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
Searching for RAID components...
Component on: sd0a: 25165952
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 42 Mod Counter: 357
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1 blocksize: 512 numBlocks: 25165824
Autoconfig: Yes
Root partition: Soft
Last configured as: raid0
Component on: sd1a: 25165952
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 42 Mod Counter: 357
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1 blocksize: 512 numBlocks: 25165824
Autoconfig: Yes
Root partition: Soft
Last configured as: raid0
Found: sd0a at 0
Found: sd1a at 1
RAID autoconfigure
Configuring raid0:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: sd0a at 0
Looking for 1 in autoconfig
Found: sd1a at 1
raid0: allocating 20 buffers of 65536 bytes.
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 25165824 (12288 MB)
raid0: configured ok
raid0 includes boot device sd0a
boot device: raid0
root on raid0a dumps on raid0b
dump_misc_init: max_paddr = 0x428000000
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/amd64/7.99.30/modules
init: copying out path `/sbin/init' 11
/: replaying log to disk
mag 0 7e:1
mag 1 2:7f
bge0: link state UP (was UNKNOWN)
bge1: link state DOWN (was UNKNOWN)
bge0: link state DOWN (was UP)
bge0: link state UP (was DOWN)
ipmi0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
...
syncing disks... done
unmounting 0xfffffe84232f2008 /proc (procfs)...
unmounting 0xfffffe84229fd008 /dev/pts (ptyfs)...
unmounting 0xfffffe8422c40008 /kern (kernfs)...
unmounting 0xfffffe811daa6008 / (/dev/raid0a)...
unmounting 0xfffffe811daa6008 / (/dev/raid0a)...
cd0: detached
brgphy1: detached
brgphy0: detached
pci4: detached
atapibus0: detached
cpu0: remove slot 2 (pic ioapic0 pin 16 vec 98)
bge1: detached
fatal protection fault in supervisor mode
trap type 4 code 0 rip ffffffff80133d5e cs 8 rflags 10046 cr2 720838b64ae8 ilevel 0 rsp fffffe811d694c70
curlwp 0xfffffe84238f6260 pid 40.1 lowest kstack 0xfffffe811d6912c0
kernel: protection fault trap, code=0
Stopped in pid 40.1 (reboot) at netbsd:intr_disestablish_xcall+0x5e: call *18(%r12)
db{0}> bt
intr_disestablish_xcall() at netbsd:intr_disestablish_xcall+0x5e
intr_disestablish() at netbsd:intr_disestablish+0x5c
bge_release_resources() at netbsd:bge_release_resources+0x24
bge_detach() at netbsd:bge_detach+0x76
config_detach() at netbsd:config_detach+0xf8
config_detach_all() at netbsd:config_detach_all+0x77
cpu_reboot() at netbsd:cpu_reboot+0x175
sys_reboot() at netbsd:sys_reboot+0x75
syscall() at netbsd:syscall+0x164
--- syscall (number 208) ---
list *(intr_disestablish_xcall+0x5e)
0xffffffff80133d5e is in intr_disestablish_xcall (/work/build/src/sys/arch/x86/x86/intr.c:1126).
1121
1122 pic = ci->ci_isources[ih->ih_slot]->is_pic;
1123 source = ci->ci_isources[ih->ih_slot];
1124 idtvec = source->is_idtvec;
1125
1126 (*pic->pic_hwmask)(pic, ih->ih_pin);
1127 atomic_and_32(&ci->ci_ipending, ~(1 << ih->ih_slot));
1128
1129 /*
1130 * Remove the handler from the chain.
Home |
Main Index |
Thread Index |
Old Index