Keyboard freeze on new laptop

To: current-users%netbsd.org@localhost
Subject: Keyboard freeze on new laptop
From: Marc Baudoin <babafou%babafou.eu.org@localhost>
Date: Sun, 12 Feb 2017 20:04:51 +0100

Hi!

I've just got a new laptop, Clevo N750BU:

http://www.clevo.com.tw/clevo_prodetail.asp?id=995&lang=en

I've installed a NetBSD-current from the latest snapshot
(February 12th) because 7.1_RC1 won't boot (it stops midway).
-current works almost fine except for three things:

- The keyboard works fine after boot but stops working after some
  time (from a few minutes to generally less than an hour, in
  console mode or within an X11 session so it has to come from
  the kernel, not the X11 server).  If I plug an external USB
  keyboard, it works fine without freezing anytime even after the
  internal keyboard is frozen.  And there's no clue in the dmesg
  output.

- the touchpad is not detected bu the kernel (this is not a
  problem for me, I always use a USB mouse)

- the wireless networking interface iwm0 is not working though
  correctly detected (again, this is not a problem, I have a USB
  wireless that works)

The keyboard freezes are the main problem for me because I just
can't use the laptop with an external keyboard.  Any idea (dmesg
attached)?

The laptop is certified to run Linux so I can try one if it helps
having NetBSD working properly on it.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.59 (GENERIC.201702120400Z)
total memory = 16143 MB
avail memory = 15653 MB
cpu_rng: RDSEED
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Notebook                         N750BU (Not Applicable                  )
mainbus0 (root)
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007F86C0A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007F887640 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000007F86C200 01B43D (v02 ALASKA A M I    01072009 INTL 20160422)
ACPI: FACS 0x000000007FBE6C40 000040
ACPI: APIC 0x000000007F887758 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000007F8877E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000007F887828 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: FIDT 0x000000007F887868 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x000000007F887908 003295 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
ACPI: HPET 0x000000007F88ABA0 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
ACPI: SSDT 0x000000007F88ABD8 000024 (v02 INTEL  xh_OEMBD 00000000 INTL 20160422)
ACPI: UEFI 0x000000007F88AC00 000042 (v01 INTEL  EDK2     00000002      01000013)
ACPI: SSDT 0x000000007F88AC48 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
ACPI: SSDT 0x000000007F88BB28 0003E3 (v02 PmRef  Cpu0Tst  00003000 INTL 20160422)
ACPI: SSDT 0x000000007F88BF10 000471 (v02 PmRef  ApTst    00003000 INTL 20160422)
ACPI: LPIT 0x000000007F88C388 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
ACPI: WSMT 0x000000007F88C420 000028 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
ACPI: SSDT 0x000000007F88C448 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000007F88C6E8 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000007F88F6F0 000034 (v01 INTEL           00000002 MSFT 0000005F)
ACPI: DBG2 0x000000007F88F728 000054 (v00 INTEL           00000002 MSFT 0000005F)
ACPI: DMAR 0x000000007F88F780 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
ACPI: ASF! 0x000000007F88F828 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: Executed 21 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 8 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, id 0x806e9
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, id 0x806e9
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, id 0x806e9
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, id 0x806e9
acpi0 at mainbus0: Intel ACPICA 20170119
acpi0: X/RSDT: OemId <ALASKA,  A M I ,01072009>, AslId <AMI ,00010013>
acpi0: invalid PCI address for D02E
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811CD52010 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811CDC7810 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811CDC7010 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE846E316710 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09)
: io 0x62,0x66
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
pckbc1 at acpi0 (PS2K, MSFT0001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (SYNM, SYN1222-3) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
IOTR (PNP0C02) at acpi0 not configured
EPC (INT0E0C) at acpi0 not configured
PEPD (INT33A1) at acpi0 not configured
CAI (PNPC000) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: Notebook LION rechargeable battery
acpibat0: granularity: low->warn 0.064 Ah, warn->full 0.064 Ah
acpiwmi0 at acpi0 (WMI, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
PTID (INT340E) at acpi0 not configured
acpitz0 at acpi0 (TZ0)
acpitz0: levels: critical 120.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 5904 (rev. 0x02)
vga0 at pci0 dev 2 function 0: vendor 8086 product 5916 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 8086 product 1911 (miscellaneous system) at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product 9d2f (rev. 0x21)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 9d31 (miscellaneous DASP, revision 0x21) at pci0 dev 20 function 2 not configured
vendor 8086 product 9d3a (miscellaneous communications, revision 0x21) at pci0 dev 22 function 0 not configured
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product 9d03 (rev. 0x21)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 3 ports, 32 slots, CAP 0xc734ff02<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
ppb0 at pci0 dev 28 function 0: vendor 8086 product 9d10 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 3: vendor 8086 product 9d13 (rev. 0xf1)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci2 dev 0 function 0: vendor 10ec product 5287 (rev. 0x01)
rtsx0: interrupting at msi1 vec 0
sdmmc0 at rtsx0
re0 at pci2 dev 0 function 1: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x12)
re0: interrupting at msi2 vec 0
re0: Ethernet address 80:fa:5b:3e:41:20
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 4: vendor 8086 product 9d14 (rev. 0xf1)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci3 dev 0 function 0: vendor 8086 product 24f3 (rev. 0x3a)
iwm0: interrupting at msi3 vec 0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 9d4e (rev. 0x21)
vendor 8086 product 9d21 (miscellaneous memory, revision 0x21) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi4 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 280b
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
vendor 8086 product 9d23 (SMBus serial bus, revision 0x21) at pci0 dev 31 function 4 not configured
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x001a15d1 rev 0x10
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat 151 us, pow   200 mW
acpicpu0: C3: FFH, lat 1034 us, pow   200 mW
acpicpu0: P0: FFH, lat  10 us, pow 15000 mW, 2701 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 13633 mW, 2700 MHz
acpicpu0: P2: FFH, lat  10 us, pow 12897 mW, 2600 MHz
acpicpu0: P3: FFH, lat  10 us, pow 12318 mW, 2500 MHz
acpicpu0: P4: FFH, lat  10 us, pow 11608 mW, 2400 MHz
acpicpu0: P5: FFH, lat  10 us, pow 10372 mW, 2200 MHz
acpicpu0: P6: FFH, lat  10 us, pow  9182 mW, 2000 MHz
acpicpu0: P7: FFH, lat  10 us, pow  8173 mW, 1800 MHz
acpicpu0: P8: FFH, lat  10 us, pow  7075 mW, 1600 MHz
acpicpu0: P9: FFH, lat  10 us, pow  6480 mW, 1500 MHz
acpicpu0: P10: FFH, lat  10 us, pow  5453 mW, 1300 MHz
acpicpu0: P11: FFH, lat  10 us, pow  4472 mW, 1100 MHz
acpicpu0: P12: FFH, lat  10 us, pow  3140 mW,  800 MHz
acpicpu0: P13: FFH, lat  10 us, pow  2756 mW,  700 MHz
acpicpu0: P14: FFH, lat  10 us, pow  2267 mW,  600 MHz
acpicpu0: P15: FFH, lat  10 us, pow  1435 mW,  400 MHz
acpicpu0: T0: FFH, lat   1 us, pow  1435 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow  1345 mW,  94 %
acpicpu0: T2: FFH, lat   1 us, pow  1255 mW,  88 %
acpicpu0: T3: FFH, lat   1 us, pow  1165 mW,  82 %
acpicpu0: T4: FFH, lat   1 us, pow  1076 mW,  75 %
acpicpu0: T5: FFH, lat   1 us, pow   986 mW,  69 %
acpicpu0: T6: FFH, lat   1 us, pow   896 mW,  63 %
acpicpu0: T7: FFH, lat   1 us, pow   807 mW,  57 %
acpicpu0: T8: FFH, lat   1 us, pow   717 mW,  50 %
acpicpu0: T9: FFH, lat   1 us, pow   627 mW,  44 %
acpicpu0: T10: FFH, lat   1 us, pow   538 mW,  38 %
acpicpu0: T11: FFH, lat   1 us, pow   448 mW,  32 %
acpicpu0: T12: FFH, lat   1 us, pow   358 mW,  25 %
acpicpu0: T13: FFH, lat   1 us, pow   269 mW,  19 %
acpicpu0: T14: FFH, lat   1 us, pow   179 mW,  13 %
acpicpu0: T15: FFH, lat   1 us, pow    89 mW,   7 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 109582400 cycle TSC drift observed
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 8086 xHCI Root Hub, class 9/0, rev 1.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 8086 xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 2: device present, speed: 6.0Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST1000LX015-1U7172>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <Slimtype DVD A  DU8A6SH, 415635502142, DP57> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0
wd1: <WDC WDS120G1G0B-00RC30>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
rum0 at uhub1 port 3
rum0: Cisco-Linksys Compact Wireless-G USB Adapter, rev 2.00/0.01, addr 1
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:22:6b:a9:53:c3
rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ubt0 at uhub1 port 5
ubt0: vendor 8087 product 0a2b, rev 2.00/0.01, addr 2
sdmmc0: sdmmc_mem_enable failed with error 60
sdmmc0: couldn't enable card: 60
uvideo0 at uhub1 port 6 configuration 1 interface 0: Bison BisonCam,NB Pro, rev 2.00/6.02, addr 3
video0 at uvideo0: Bison BisonCam,NB Pro, rev 2.00/6.02, addr 3
uhidev0 at uhub1 port 7 configuration 1 interface 0
uhidev0: vendor 04d9 USB Keyboard, rev 1.10/3.10, addr 4, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 7 configuration 1 interface 1
uhidev1: vendor 04d9 USB Keyboard, rev 1.10/3.10, addr 4, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub1 port 8 configuration 1 interface 0
uhidev2: Logitech USB Receiver, rev 2.00/22.00, addr 5, iclass 3/1
ums0 at uhidev2: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev3 at uhub1 port 8 configuration 1 interface 1
uhidev3: Logitech USB Receiver, rev 2.00/22.00, addr 5, iclass 3/0
uhidev3: 17 report ids
uhid2 at uhidev3 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev3 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev3 reportid 17: input=19, output=19, feature=0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 19 errors while detecting hardware; check system log.
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.59/modules
sdmmc0: sdmmc_mem_enable failed with error 60
sdmmc0: couldn't enable card: 60
iwm0: hw rev 0x200, fw ver 16.242414.0, address 44:85:00:57:5c:47
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Follow-Ups:
- Re: Keyboard freeze on new laptop
  - From: Marc Baudoin

Prev by Date: Re: nvme(4) related KASSERT ?
Next by Date: Re: netcat in -current
Previous by Thread: nvme(4) related KASSERT ?
Next by Thread: Re: Keyboard freeze on new laptop
Indexes:

Home | Main Index | Thread Index | Old Index