Re: dk wedges vs netbsd -current

[Geoff Wing <gcw%pobox.com@localhost>]

On Saturday 2017-04-01 18:14 -0700, John Nemeth output:
:     As others have noted, you are totally concentrating on the
:wrong thing.  The fact that it "won't build dk structures" is of
:no relevance.  The first thing that has to happen is detecting the
:drive.  Anyway, can you capture a dmesg?

Can't get a -current one until tomorrow (30 hours or so).
7.1 sees wd0a, wd0b, etc
-current will see wd0 but won't find any of the partitions on it (unless I
have DKWEDGE_METHOD* and then I'll get dk() partitions/wedges)


NetBSD 7.1 (GENERIC.201703111743Z)
total memory = 511 MB
avail memory = 486 MB
kern.module.path=/stand/i386/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System Manufacturer System Name (System Version)
mainbus0 (root)
ACPI: RSDP 0xf52b0 000014 (v00 ASUS  )
ACPI: RSDT 0x1ffec000 000030 (v01 ASUS   P4B533   42302E31 MSFT 31313031)
ACPI: FACP 0x1ffec0c0 000074 (v01 ASUS   P4B533   42302E31 MSFT 31313031)
ACPI: DSDT 0x1ffec134 002742 (v01   ASUS P4B533   00001000 MSFT 0100000B)
ACPI: FACS 0x1ffff000 000040
ACPI: BOOT 0x1ffec030 000028 (v01 ASUS   P4B533   42302E31 MSFT 31313031)
ACPI: APIC 0x1ffec058 00005A (v01 ASUS   P4B533   42302E31 MSFT 31313031)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 2.00GHz, id 0xf24
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <ASUS  ,P4B533  ,42302e31>, AslId <MSFT,31313031>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM1 (PNP0C01) at acpi0 not configured
SBIO (PNP0C02) at acpi0 not configured
SYS1 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
ECP (PNP0401) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
SYS2 (PNP0C02) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1a30 (rev. 0x11)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x1a31 (rev. 0x11)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0110 (rev. 0xb2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cmpci0 at pci2 dev 3 function 0: vendor 0x13f6 product 0x0111 (rev. 0x10)
cmpci0: interrupting at ioapic0 pin 21
audio0 at cmpci0: full duplex, playback, capture, mmap, independent
opl0 at cmpci0: model OPL3: LR swapped
midi1 at opl0: CMPCI Yamaha OPL3
mpu0 at cmpci0
midi2 at mpu0: CMPCI MPU-401 MIDI UART
ex0 at pci2 dev 12 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at ioapic0 pin 20
ex0: MAC address [...]
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci2 dev 14 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex1: interrupting at ioapic0 pin 18
ex1: MAC address [...]
exphy1 at ex1 phy 24: 3Com internal media interface
exphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24c0 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801DB IDE Controller (ICH4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0
wd0: <QUANTUM FIREBALL SE4.3A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 4110 MB, 14848 cyl, 9 head, 63 sec, 512 bytes/sect x 8418816 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SONY DVD-ROM DDU1612, , DYS3> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)