Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Testing suspend/resume Dell N5030 NetBSD 7.1 amd64
I've been trying to get suspend/resume to work on a Dell Inspiron N5030 and
seem to be hitting a brick wall. Suspend works fine :-) but powering on it
starts to resume and then silently reboots. Can anyone suggest the knobs to
twiddle to get more info?
Cheers,
Dave
acpi settings in force
hw.acpi.root = 1031584
hw.acpi.sleep.state = 0
hw.acpi.sleep.states = S0 S3 S4 S5
hw.acpi.sleep.beep = 0
hw.acpi.sleep.vbios = 2
hw.acpi.stat.gpe = 1
hw.acpi.stat.sci = 1
hw.acpi.stat.fixed = 0
hw.acpi.stat.method = 15840
hw.acpi.wake.pchb0 = 0
hw.acpi.wake.ppb4 = 0
hw.acpi.wake.uhci3 = 0
hw.acpi.wake.uhci4 = 0
hw.acpi.wake.uhci5 = 0
hw.acpi.wake.uhci0 = 0
hw.acpi.wake.uhci1 = 0
hw.acpi.wake.uhci2 = 0
hw.acpi.wake.ehci0 = 0
hw.acpi.wake.ehci1 = 0
hw.acpi.wake.hdaudio0 = 0
hw.acpi.wake.ppb0 = 0
hw.acpi.wake.ppb1 = 0
hw.acpi.wake.ppb2 = 0
hw.acpi.wake.ppb3 = 0
hw.acpi.wake.acpilid0 = 1
hw.acpi.wake.acpibut0 = 1
hw.acpi.acpiout1.brightness = 24
hw.acpi.acpivga0.bios_switch = 1
hw.acpi.acpivga1.bios_switch = 1
hw.acpi.cpu.dynamic = 1
hw.acpi.cpu.passive =
sysctl -w hw.acpi.sleep.state=3
acpi0: entering state S3
flushing disk caches: 7 done
<suspends>
<press power on>
ioapic0 reenabling
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
ppb0: PCI Express capability version 1 (Root Port of PCI-E Root Complex> x1 @
2.5GT/s
ppb1: PCI Express capability version 1 (Root Port of PCI-E Root Complex> x1 @
2.5GT/s
ppb2: PCI Express capability version 1 (Root Port of PCI-E Root Complex> x1 @
2.5GT/s
ppb3: PCI Express capability version 1 (Root Port of PCI-E Root Complex> x1 @
2.5GT/s
<system reboots>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1 (GENERIC) #1: Tue Mar 14 14:52:04 GMT 2017
root%dell.anduin.org.uk@localhost:/usr/obj/sys/arch/amd64/compile/GENERIC
total memory = 3034 MB
avail memory = 2928 MB
kern.module.path=/stand/amd64/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron N5030
mainbus0 (root)
ACPI: RSDP 0xfbda0 000024 (v02 DELL )
ACPI: XSDT 0xbdac3e00 00005C (v01 DELL WN09 27DA090D ASL 00000061)
ACPI: FACP 0xbdac3c9c 0000F4 (v04 DELL WN09 27DA090D ASL 00000061)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64
(20131218/tbfadt-634)
ACPI: DSDT 0xbdac4400 005294 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0xbdad2c00 000040
ACPI: HPET 0xbdac3f00 000038 (v01 DELL WN09 00000001 ASL 00000061)
ACPI: APIC 0xbdac4000 000068 (v01 DELL WN09 27DA090D ASL 00000047)
ACPI: MCFG 0xbdac3fc0 00003E (v16 DELL WN09 27DA090D ASL 00000061)
ACPI: SLIC 0xbdac409c 000176 (v01 DELL WN09 27DA090D ASL 00000061)
ACPI: OSFR 0xbdac3600 00008C (v01 DELL WN09 27DA090D ASL 00000061)
ACPI: SSDT 0xbdac2367 00066C (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Pentium(R) Dual-Core CPU T4500 @ 2.30GHz, id
0x1067a
cpu1 at mainbus0 apid 1: Pentium(R) Dual-Core CPU T4500 @ 2.30GHz, id
0x1067a
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <DELL , WN09 ,27da090d>, AslId <ASL ,00000061>
ACPI: SSDT 0xbdac29d3 00023F (v01 PmRef BspIst 00003000 INTL 20050624)
ACPI: SSDT 0x0 00023F (v01 PmRef BspIst 00003000 INTL 20050624)
ACPI: SSDT 0xbdac2de9 0005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
ACPI: SSDT 0x0 0005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
ACPI: SSDT 0xbdac2c12 0001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 0x0 0001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 0xbdac33af 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: SSDT 0x0 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
WSEC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2M, DLL0451) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MB4 (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 100
acpiout2 at acpivga0 (DP, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0: 0x0300 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0301 (acpiout3): Unknown Output Device, head 0
acpivga0: 0x0302 (acpiout4): Unknown Output Device, head 0
acpivga0: 0x0303 (acpiout5): Unknown Output Device, head 0
acpivga1 at acpi0 (VID2): ACPI Display Adapter
acpivga1: failed to evaluate \_SB_.PCI0.VID2._DOD: AE_BAD_DATA
MB2 (PNP0C01) at acpi0 not configured
MB3 (PNP0C01) at acpi0 not configured
MB1 (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: SMP-SDI2.2 LION rechargeable battery
acpibat0: granularity: low->warn 0.044 Ah, warn->full 0.044 Ah
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 105.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-646)
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a40 (rev. 0x07)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff8000363d0000, size 1366x768, depth 32, stride
5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using
wskbd0
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at pci0
dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 21
hdafg0 at hdaudio0: Realtek ALC269
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @
2.5GT/s
pci1 at ppb0 bus 11
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @
2.5GT/s
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4232 (rev. 0x00)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 1T2R, MoW, address 00:22:fb:d1:36:5a
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2944 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @
2.5GT/s
pci3 at ppb2 bus 9
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci3 dev 0 function 0: Atheros AR8152 v2.0 PCIe Fast Ethernet
alc0: interrupting at ioapic0 pin 18
alc0: Ethernet address 18:03:73:64:62:ac
atphy0 at alc0 phy 0: L2 10/100 PHY, rev. 5
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @
2.5GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci5 at ppb4 bus 2
pci5: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2919 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2929 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP
0xef20ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 17 us, pow 250 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2300 MHz
acpicpu0: P1: FFH, lat 10 us, pow 16314 mW, 1600 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1200 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK3275GSX>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <PLDS DVD+/-RW DS-8A5SH, 106090220941, XD13> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
umass0 at uhub3 port 5 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/38.82, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
uvideo0 at uhub3 port 6 configuration 1 interface 0: CNFA071H194050001O02
Laptop_Integrated_Webcam_0.3M, rev 2.00/14.11, addr 3
video0 at uvideo0: CNFA071H194050001O02 Laptop_Integrated_Webcam_0.3M, rev
2.00/14.11, addr 3
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
/usr: replaying log to disk
/var: replaying log to disk
iwn0: scan request(1) while scanning(0) ignored
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
iwn0: DAD detected duplicate IPv6 address 2001:470:1f09:a8e::72: NS
in/out=1/1, NA in=0
iwn0: DAD complete for 2001:470:1f09:a8e::72 - duplicate found
iwn0: manual intervention required
/home: replaying log to disk
Home |
Main Index |
Thread Index |
Old Index