USB Issues in 7.1_STABLE

["Gary Duzan" <gary%duzan.org@localhost>]

   Booting from the installer image, I noticed a couple of USB related
issues. First, the boot menu wouldn't recognize my USB keyboard;
I had to hit ENTER on my PS/2 keyboard to get the boot to continue.
Then the boot process stopped after probing usb1 (see dmesg below),
only continuing after I pressed a key on the PS/2 keyboard. It
seemed like my USB devices worked after that, but I didn't do any
additional testing.

   Is there anything I can do to help diagnose the problem?

   Thanks.

				Gary Duzan



---
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.1_STABLE (GENERIC) #40: Fri Apr 21 08:45:52 EDT 2017
	root%bldr.6net.duzan.org@localhost:/usr/build/netbsd-7/obj/usr/build/netbsd-7/src/sys/arch/amd64/compile/GENERIC
total memory = 12028 MB
avail memory = 11661 MB
kern.module.path=/stand/amd64/7.1/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Gigabyte Technology Co., Ltd. GA-880GMA-UD2H ( )
mainbus0 (root)
ACPI: RSDP 0xf5df0 000014 (v00 GBT   )
ACPI: RSDT 0xcfcf1000 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0xcfcf1040 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0xcfcf10c0 007732 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0xcfcf0000 000040
ACPI: SSDT 0xcfcf88c0 00088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 0xcfcf9180 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0xcfcf91c0 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0xcfcf9200 000034 (v01 GBT             00000000      00000000)
ACPI: APIC 0xcfcf8800 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0: AMD Athlon(tm) II X4 640 Processor, id 0x100f53
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1: AMD Athlon(tm) II X4 640 Processor, id 0x100f53
cpu2 at mainbus0 apid 2: AMD Athlon(tm) II X4 640 Processor, id 0x100f53
cpu3 at mainbus0 apid 3: AMD Athlon(tm) II X4 640 Processor, id 0x100f53
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <GBT   ,GBTUACPI,42302e31>, AslId <GBTU,01010101>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
SYSR (PNP0C02) at acpi0 not configured
PMIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FDC0 (PNP0700) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
EXPL (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
radeon0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9715 (rev. 0x00)
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS690/780 HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 9 function 0: vendor 0x1022 product 0x9608 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci2 dev 0 function 0: vendor 0x1033 product 0x0194 (rev. 0x03)
xhci0: interrupting at ioapic0 pin 17
xhci0: xHCI version 0.96
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
[boot pauses here]
ppb2 at pci0 dev 10 function 0: vendor 0x1022 product 0x9609 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 1c:6f:65:8f:12:54
re0: using 256 tx descriptors
ifmedia_set: no match for 0x20/0xfffffff
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x40)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xf732ff05<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb3 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb4 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
iic1 at piixpm0: I2C bus
iic2 at piixpm0: I2C bus
iic3 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Realtek ALC892
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: DIG03 2ch: SPDIF Out [Built-In]
hdafg1: ADC04 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC05 2ch: Mic In [Jack]
hdafg1: DIG-In06 2ch: SPDIF In [Jack]
hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ohci2 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb6 at ohci2: USB revision 1.0
ppb4 at pci0 dev 21 function 0: vendor 0x1002 product 0x43a0 (rev. 0x00)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci5 dev 0 function 0: vendor 0x197b product 0x2368 (rev. 0x00)
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 17
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is PATA
atabus6 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
ppb5 at pci0 dev 21 function 1: vendor 0x1002 product 0x43a1 (rev. 0x00)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ohci3 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb7 at ohci3: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci3
usb8 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow 26460 mW, 3000 MHz
acpicpu0: P1: FFH, lat   4 us, pow 18590 mW, 2300 MHz
acpicpu0: P2: FFH, lat   4 us, pow 15360 mW, 1800 MHz
acpicpu0: P3: FFH, lat   4 us, pow  8715 mW,  800 MHz
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3013901340 Hz quality 3000
uhub0 at usb0: vendor 0x1033 xHCI Root Hub, class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1033 xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
uhub6 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub7: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 3: device present, speed: 6.0Gb/s
ahcisata0 port 4: device present, speed: 1.5Gb/s
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub8 at usb8: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub8: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <ST1000DM003-1CH162>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <TOSHIBA HDWD120>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: GPT GUID: 9bd633a6-9bd6-4eca-9db5-0122f339e4ce
dk0 at wd1: c49379dd-9bac-4e6c-b0ac-ac4bbdaef073
dk0: 3907029056 blocks at 64, type: 
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus3 drive 0
wd2: <TOSHIBA HDWD120>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd2: GPT GUID: 644b8c9e-fe31-46ed-832a-62206892ed48
dk1 at wd2: bc7d1dd6-cd3a-43b2-8f30-b3973453c6f1
dk1: 3907029056 blocks at 64, type: 
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus4: 1 targets
cd0 at atapibus0 drive 0: <ASUS    DRW-24B1ST, , 1.01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub9 at uhub5 port 1:  USB2.0 Hub, class 9/0, rev 2.00/77.63, addr 2
uhub9: single transaction translator
uhub9: 4 ports with 4 removable, self powered
umass0 at uhub8 port 1 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, 1.00> disk removable
sd0: fabricating a geometry
sd0: 7396 MB, 7396 cyl, 64 head, 32 sec, 512 bytes/sect x 15148608 sectors
sd0: fabricating a geometry
uscanner0 at uhub2 port 1
uscanner0: Hewlett-Packard HP ScanJet 5200C, rev 1.00/1.00, addr 2
umass1 at uhub9 port 1 configuration 1 interface 0
umass1: Sunplus Innovation Technology. USB to Serial-ATA bridge, rev 2.00/1.0f, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <SPIF301, USB2SATA Bridge, 0108> disk removable
sd1: drive offline
uhub10 at uhub8 port 2:  USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 3
uhub10: single transaction translator
uhub10: 4 ports with 4 removable, self powered
uhub11 at uhub9 port 4:  USB2.0 Hub, class 9/0, rev 2.00/77.63, addr 4
uhub11: single transaction translator
uhub11: 4 ports with 4 removable, self powered
uhidev0 at uhub10 port 1 configuration 1 interface 0
uhidev0:  USB Optical Mouse, rev 2.00/2.00, addr 4, iclass 3/1
ums0 at uhidev0: 3 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev1 at uhub10 port 2 configuration 1 interface 0
uhidev1: Unicomp Endura Keyboard, rev 1.10/2.0c, addr 5, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
drm: initializing kernel modesetting (RS880 0x1002:0x9715 0x1458:0xD000).
drm: register mmio base: 0xfdee0000
drm: register mmio size: 65536
drm kern info: ATOM BIOS: B43106_DVI
radeon0: info: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: Detected VRAM RAM=100M, BAR=256M
drm: RAM width 32bits DDR
Zone  kernel: Available graphics memory: 4244658 kiB
Zone   dma32: Available graphics memory: 2097152 kiB
drm: radeon: 256M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: Loading RS780 Microcode
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0xffff8000d328ec00
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 18 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ib test on ring 0 succeeded in 0 usecs
drm: Radeon Display Connectors
drm: Connector 0:
drm:   VGA-1
drm:   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
drm:   Encoders:
drm:     CRT1: INTERNAL_KLDSCP_DAC1
drm: Connector 1:
drm:   DVI-D-1
drm:   HPD1
drm:   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
drm:   Encoders:
drm:     DFP1: INTERNAL_KLDSCP_LVTMA
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff8000d349f000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
/: replaying log to disk