Im fine with not supporting the hardware interface(I wasn’t using it anyways), but the kernel should not go in a panic state, since I cant upgrade the server or use it From: port-amd64-owner%NetBSD.org@localhost [mailto:port-amd64-owner%NetBSD.org@localhost] On Behalf Of Derrick Lobo The daily beta version of nebtsd 8 does not support ixg 5gb NIC’s, the support was enabled in 7.99 I have added the dmesg below for both versions. -------------- NetBSD 8.0_BETA (GENERIC.201711070830Z) ixg0: device x540 ixg0: clearing prefetchable bit ixg0: using NSIX interrupts with 1 vectors ixg0: NVM image version 4.4 IS 0x0 PHY FW Revision 4.3 ID 0x0 EtrackID 000003e1 ixg0: PHY OUI 0x00aa00 model 0x0020, rev.0 ixg0: interrupting at msi0 vec 0 fatal integer divide fault in supervisor mode trap type 0 code rip 0xffffffff0031e273 cs 0x8 rflags 0x10246 cr2 0 ilevel 0x8 rsp 0xffffffff81884460 curlup 0xffffffff81884460 pid 0.1 lowest kstack 0xffffffff818812c0 kernel:integer divide fault trap, code=0 stopped in pid 0.1 (system) at netbsd:ixgbe_update_stats_count+0x94: d iv1 e40(%r14),%eax db(0)> Last login: Fri Jun 2 11:03:58 2017 from 192.168.36.146 NetBSD 7.99.71 (GENERIC) #0: Mon May 8 10:00:41 UTC 2017 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.71 (GENERIC) #0: Mon May 8 10:00:41 UTC 2017 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC total memory = 143 GB avail memory = 139 GB cpu_rng: RDSEED timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Supermicro SYS-1028R-MCTR (0123456789) mainbus0 (root) mainbus0: Intel MP Specification (Version 1.4) (SMCI--MB SUPERM) cpu0 at mainbus0 apid 0 cpu0: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu1 at mainbus0 apid 2 cpu1: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu2 at mainbus0 apid 4 cpu2: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu3 at mainbus0 apid 6 cpu3: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu4 at mainbus0 apid 8 cpu4: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu5 at mainbus0 apid 10 cpu5: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu6 at mainbus0 apid 12 cpu6: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu7 at mainbus0 apid 16 cpu7: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu8 at mainbus0 apid 18 cpu8: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu9 at mainbus0 apid 20 cpu9: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu10 at mainbus0 apid 22 cpu10: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu11 at mainbus0 apid 24 cpu11: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu12 at mainbus0 apid 26 cpu12: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu13 at mainbus0 apid 28 cpu13: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu14 at mainbus0 apid 32 cpu14: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu15 at mainbus0 apid 34 cpu15: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu16 at mainbus0 apid 36 cpu16: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu17 at mainbus0 apid 38 cpu17: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu18 at mainbus0 apid 40 cpu18: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu19 at mainbus0 apid 42 cpu19: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu20 at mainbus0 apid 44 cpu20: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu21 at mainbus0 apid 48 cpu21: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu22 at mainbus0 apid 50 cpu22: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu23 at mainbus0 apid 52 cpu23: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu24 at mainbus0 apid 54 cpu24: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu25 at mainbus0 apid 56 cpu25: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu26 at mainbus0 apid 58 cpu26: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 cpu27 at mainbus0 apid 60 cpu27: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz, id 0x406f1 mpbios: bus 0 is type PCI mpbios: bus 128 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI mpbios: bus 3 is type PCI mpbios: bus 4 is type PCI mpbios: bus 5 is type PCI mpbios: bus 6 is type PCI mpbios: bus 7 is type PCI mpbios: bus 8 is type PCI mpbios: bus 129 is type ISA ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins ioapic1 at mainbus0 apid 2: pa 0xfec01000, version 0x20, 24 pins ioapic2 at mainbus0 apid 3: pa 0xfec40000, version 0x20, 24 pins mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 26 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 28 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 29 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 30 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 26 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 28 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 29 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 30 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 32 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 36 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 37 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 38 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 34 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 37 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 36 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 38 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 34 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 37 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 36 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 38 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 40 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 44 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 45 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 46 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 31 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 39 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 31 for apic 2 too high; assuming ACPI global int value mpbios: use apid 2 instead of 9 mpbios: WARNING: pin 39 for apic 2 too high; assuming ACPI global int value mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 1 instead of 8 mpbios: use apid 3 instead of 10 mpbios: WARNING: pin 55 for apic 3 too high; assuming ACPI global int value mpbios: use apid 3 instead of 10 mpbios: WARNING: pin 63 for apic 3 too high; assuming ACPI global int value mpbios: use apid 3 instead of 10 mpbios: WARNING: pin 55 for apic 3 too high; assuming ACPI global int value mpbios: use apid 3 instead of 10 mpbios: WARNING: pin 63 for apic 3 too high; assuming ACPI global int value ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 6f00 (rev. 0x01) ppb0 at pci0 dev 1 function 0: vendor 8086 product 6f02 (rev. 0x01) ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 8.0GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok vendor 1000 product 005d (RAID mass storage, revision 0x02) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 2 function 0: vendor 8086 product 6f04 (rev. 0x01) ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 8.0GT/s ppb1: link is x8 @ 5.0GT/s pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ixg0 at pci2 dev 0 function 0: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k ixg0: device X540 ixg0: clearing prefetchable bit ixg0: Using MSIX interrupts with 9 vectors ixg0: TrackID 800003e1 ixg0: for TX/RX, interrupting at msix0 vec 0, bound queue 0 to cpu 0 ixg0: for TX/RX, interrupting at msix0 vec 1, bound queue 1 to cpu 1 ixg0: for TX/RX, interrupting at msix0 vec 2, bound queue 2 to cpu 2 ixg0: for TX/RX, interrupting at msix0 vec 3, bound queue 3 to cpu 3 ixg0: for TX/RX, interrupting at msix0 vec 4, bound queue 4 to cpu 4 ixg0: for TX/RX, interrupting at msix0 vec 5, bound queue 5 to cpu 5 ixg0: for TX/RX, interrupting at msix0 vec 6, bound queue 6 to cpu 6 ixg0: for TX/RX, interrupting at msix0 vec 7, bound queue 7 to cpu 7 ixg0: for link, interrupting at msix0 vec 8, affinity to cpu 8 ixg0: PCI Express Bus: Speed 5.0GT/s Width x8 ixg1 at pci2 dev 0 function 1: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k ixg1: device X540 ixg1: clearing prefetchable bit ixg1: Using MSIX interrupts with 9 vectors ixg1: TrackID 800003e1 ixg1: for TX/RX, interrupting at msix1 vec 0, bound queue 0 to cpu 0 ixg1: for TX/RX, interrupting at msix1 vec 1, bound queue 1 to cpu 1 ixg1: for TX/RX, interrupting at msix1 vec 2, bound queue 2 to cpu 2 ixg1: for TX/RX, interrupting at msix1 vec 3, bound queue 3 to cpu 3 ixg1: for TX/RX, interrupting at msix1 vec 4, bound queue 4 to cpu 4 ixg1: for TX/RX, interrupting at msix1 vec 5, bound queue 5 to cpu 5 ixg1: for TX/RX, interrupting at msix1 vec 6, bound queue 6 to cpu 6 ixg1: for TX/RX, interrupting at msix1 vec 7, bound queue 7 to cpu 7 ixg1: for link, interrupting at msix1 vec 8, affinity to cpu 8 ixg1: PCI Express Bus: Speed 5.0GT/s Width x8 ppb2 at pci0 dev 2 function 2: vendor 8086 product 6f06 (rev. 0x01) ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 8.0GT/s ppb2: link is x4 @ 8.0GT/s pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok nvme0 at pci3 dev 0 function 0: vendor 8086 product 0953 (rev. 0x01) nvme0: NVMe 1.0 nvme0: for admin queue interrupting at msix2 vec 0 nvme0: INTEL SSDPEDMX020T4, firmware 8DV10135, serial CVPD5141008N2P0SGN nvme0: for io queue 1 interrupting at msix2 vec 1 affinity to cpu0 nvme0: for io queue 2 interrupting at msix2 vec 2 affinity to cpu1 nvme0: for io queue 3 interrupting at msix2 vec 3 affinity to cpu2 nvme0: for io queue 4 interrupting at msix2 vec 4 affinity to cpu3 nvme0: for io queue 5 interrupting at msix2 vec 5 affinity to cpu4 nvme0: for io queue 6 interrupting at msix2 vec 6 affinity to cpu5 nvme0: for io queue 7 interrupting at msix2 vec 7 affinity to cpu6 nvme0: for io queue 8 interrupting at msix2 vec 8 affinity to cpu7 nvme0: for io queue 9 interrupting at msix2 vec 9 affinity to cpu8 nvme0: for io queue 10 interrupting at msix2 vec 10 affinity to cpu9 nvme0: for io queue 11 interrupting at msix2 vec 11 affinity to cpu10 nvme0: for io queue 12 interrupting at msix2 vec 12 affinity to cpu11 nvme0: for io queue 13 interrupting at msix2 vec 13 affinity to cpu12 nvme0: for io queue 14 interrupting at msix2 vec 14 affinity to cpu13 nvme0: for io queue 15 interrupting at msix2 vec 15 affinity to cpu14 nvme0: for io queue 16 interrupting at msix2 vec 16 affinity to cpu15 nvme0: for io queue 17 interrupting at msix2 vec 17 affinity to cpu16 nvme0: for io queue 18 interrupting at msix2 vec 18 affinity to cpu17 nvme0: for io queue 19 interrupting at msix2 vec 19 affinity to cpu18 nvme0: for io queue 20 interrupting at msix2 vec 20 affinity to cpu19 nvme0: for io queue 21 interrupting at msix2 vec 21 affinity to cpu20 nvme0: for io queue 22 interrupting at msix2 vec 22 affinity to cpu21 nvme0: for io queue 23 interrupting at msix2 vec 23 affinity to cpu22 nvme0: for io queue 24 interrupting at msix2 vec 24 affinity to cpu23 nvme0: for io queue 25 interrupting at msix2 vec 25 affinity to cpu24 nvme0: for io queue 26 interrupting at msix2 vec 26 affinity to cpu25 nvme0: for io queue 27 interrupting at msix2 vec 27 affinity to cpu26 nvme0: for io queue 28 interrupting at msix2 vec 28 affinity to cpu27 ld0 at nvme0 nsid 1 ld0: 1863 GB, 243201 cyl, 255 head, 63 sec, 512 bytes/sect x 3907029168 sectors ppb3 at pci0 dev 3 function 0: vendor 8086 product 6f08 (rev. 0x01) ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok vendor 8086 product 6f20 (miscellaneous system, revision 0x01) at pci0 dev 4 function 0 not configured vendor 8086 product 6f21 (miscellaneous system, revision 0x01) at pci0 dev 4 function 1 not configured vendor 8086 product 6f22 (miscellaneous system, revision 0x01) at pci0 dev 4 function 2 not configured vendor 8086 product 6f23 (miscellaneous system, revision 0x01) at pci0 dev 4 function 3 not configured vendor 8086 product 6f24 (miscellaneous system, revision 0x01) at pci0 dev 4 function 4 not configured vendor 8086 product 6f25 (miscellaneous system, revision 0x01) at pci0 dev 4 function 5 not configured vendor 8086 product 6f26 (miscellaneous system, revision 0x01) at pci0 dev 4 function 6 not configured vendor 8086 product 6f27 (miscellaneous system, revision 0x01) at pci0 dev 4 function 7 not configured vendor 8086 product 6f28 (miscellaneous system, revision 0x01) at pci0 dev 5 function 0 not configured vendor 8086 product 6f29 (miscellaneous system, revision 0x01) at pci0 dev 5 function 1 not configured vendor 8086 product 6f2a (miscellaneous system, revision 0x01) at pci0 dev 5 function 2 not configured vendor 8086 product 6f2c (interrupt system, IO(x) APIC, revision 0x01) at pci0 dev 5 function 4 not configured vendor 8086 product 8d7c (undefined, subclass 0x00, revision 0x05) at pci0 dev 17 function 0 not configured xhci0 at pci0 dev 20 function 0: vendor 8086 product 8d31 (rev. 0x05) xhci0: interrupting at msi3 vec 0 xhci0: xHCI version 1.0 usb0 at xhci0: USB revision 3.0 usb1 at xhci0: USB revision 2.0 vendor 8086 product 8d3a (miscellaneous communications, revision 0x05) at pci0 dev 22 function 0 not configured vendor 8086 product 8d3b (miscellaneous communications, revision 0x05) at pci0 dev 22 function 1 not configured ehci0 at pci0 dev 26 function 0: vendor 8086 product 8d2d (rev. 0x05) ehci0: interrupting at ioapic0 pin 18 ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 usb2 at ehci0: USB revision 2.0 ppb4 at pci0 dev 28 function 0: vendor 8086 product 8d10 (rev. 0xd5) ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb4: link is x1 @ 2.5GT/s pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled, rd/line, wr/inv ok ppb5 at pci5 dev 0 function 0: vendor 1a03 product 1150 (rev. 0x03) ppb5: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> pci6 at ppb5 bus 6 pci6: i/o space, memory space enabled, rd/line, wr/inv ok vga0 at pci6 dev 0 function 0: vendor 1a03 product 2000 (rev. 0x30) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at vga0 not configured ppb6 at pci0 dev 28 function 2: vendor 8086 product 8d14 (rev. 0xd5) ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb6: link is x1 @ 2.5GT/s pci7 at ppb6 bus 7 pci7: i/o space, memory space enabled, rd/line, wr/inv ok wm0 at pci7 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03) wm0: for TX and RX interrupting at msix4 vec 0 affinity to 1 wm0: for TX and RX interrupting at msix4 vec 1 affinity to 2 wm0: for TX and RX interrupting at msix4 vec 2 affinity to 3 wm0: for TX and RX interrupting at msix4 vec 3 affinity to 4 wm0: for LINK interrupting at msix4 vec 4 wm0: PCI-Express bus wm0: 2048 words FLASH(HW), version 3.25, Image Unique ID 000005cc wm0: Ethernet address 0c:c4:7a:c8:65:ee wm0: Copper ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 28 function 3: vendor 8086 product 8d16 (rev. 0xd5) ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb7: link is x1 @ 2.5GT/s pci8 at ppb7 bus 8 pci8: i/o space, memory space enabled, rd/line, wr/inv ok wm1 at pci8 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03) wm1: for TX and RX interrupting at msix5 vec 0 affinity to 1 wm1: for TX and RX interrupting at msix5 vec 1 affinity to 2 wm1: for TX and RX interrupting at msix5 vec 2 affinity to 3 wm1: for TX and RX interrupting at msix5 vec 3 affinity to 4 wm1: for LINK interrupting at msix5 vec 4 wm1: PCI-Express bus wm1: 2048 words FLASH(HW), version 3.25, Image Unique ID 000005d0 wm1: Ethernet address 0c:c4:7a:c8:65:ef wm1: Copper ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ehci1 at pci0 dev 29 function 0: vendor 8086 product 8d26 (rev. 0x05) ehci1: interrupting at ioapic0 pin 18 ehci1: BIOS has given up ownership ehci1: EHCI version 1.0 usb3 at ehci1: USB revision 2.0 ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8d44 (rev. 0x05) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: Min/Max interval 1/367 seconds ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8d02 (rev. 0x05) ahcisata0: interrupting at ioapic0 pin 16 ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A> atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 atabus2 at ahcisata0 channel 2 atabus3 at ahcisata0 channel 3 atabus4 at ahcisata0 channel 4 atabus5 at ahcisata0 channel 5 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8d22 (rev. 0x05) ichsmb0: interrupting at ioapic0 pin 18 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) isa_intr_establish: no MP mapping found pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 spkr0 at pcppi0: PC Speaker midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer0: attached to pcppi0 pci9 at mainbus0 bus 128 pci9: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok vendor 8086 product 6f20 (miscellaneous system, revision 0x01) at pci9 dev 4 function 0 not configured vendor 8086 product 6f21 (miscellaneous system, revision 0x01) at pci9 dev 4 function 1 not configured vendor 8086 product 6f22 (miscellaneous system, revision 0x01) at pci9 dev 4 function 2 not configured vendor 8086 product 6f23 (miscellaneous system, revision 0x01) at pci9 dev 4 function 3 not configured vendor 8086 product 6f24 (miscellaneous system, revision 0x01) at pci9 dev 4 function 4 not configured vendor 8086 product 6f25 (miscellaneous system, revision 0x01) at pci9 dev 4 function 5 not configured vendor 8086 product 6f26 (miscellaneous system, revision 0x01) at pci9 dev 4 function 6 not configured vendor 8086 product 6f27 (miscellaneous system, revision 0x01) at pci9 dev 4 function 7 not configured vendor 8086 product 6f28 (miscellaneous system, revision 0x01) at pci9 dev 5 function 0 not configured vendor 8086 product 6f29 (miscellaneous system, revision 0x01) at pci9 dev 5 function 1 not configured vendor 8086 product 6f2a (miscellaneous system, revision 0x01) at pci9 dev 5 function 2 not configured vendor 8086 product 6f2c (interrupt system, IO(x) APIC, revision 0x01) at pci9 dev 5 function 4 not configured coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=92 coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=92 coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=92 coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=92 coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=92 coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=92 coretemp6 at cpu6: thermal sensor, 1 C resolution, Tjmax=92 coretemp7 at cpu7: thermal sensor, 1 C resolution, Tjmax=92 coretemp8 at cpu8: thermal sensor, 1 C resolution, Tjmax=92 coretemp9 at cpu9: thermal sensor, 1 C resolution, Tjmax=92 coretemp10 at cpu10: thermal sensor, 1 C resolution, Tjmax=92 coretemp11 at cpu11: thermal sensor, 1 C resolution, Tjmax=92 coretemp12 at cpu12: thermal sensor, 1 C resolution, Tjmax=92 coretemp13 at cpu13: thermal sensor, 1 C resolution, Tjmax=92 coretemp14 at cpu14: thermal sensor, 1 C resolution, Tjmax=92 coretemp15 at cpu15: thermal sensor, 1 C resolution, Tjmax=92 coretemp16 at cpu16: thermal sensor, 1 C resolution, Tjmax=92 coretemp17 at cpu17: thermal sensor, 1 C resolution, Tjmax=92 coretemp18 at cpu18: thermal sensor, 1 C resolution, Tjmax=92 coretemp19 at cpu19: thermal sensor, 1 C resolution, Tjmax=92 coretemp20 at cpu20: thermal sensor, 1 C resolution, Tjmax=92 coretemp21 at cpu21: thermal sensor, 1 C resolution, Tjmax=92 coretemp22 at cpu22: thermal sensor, 1 C resolution, Tjmax=92 coretemp23 at cpu23: thermal sensor, 1 C resolution, Tjmax=92 coretemp24 at cpu24: thermal sensor, 1 C resolution, Tjmax=92 coretemp25 at cpu25: thermal sensor, 1 C resolution, Tjmax=92 coretemp26 at cpu26: thermal sensor, 1 C resolution, Tjmax=92 coretemp27 at cpu27: thermal sensor, 1 C resolution, Tjmax=92 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 ERROR: 576 cycle TSC drift observed uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0 uhub0: 6 ports with 6 removable, self powered uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0 uhub1: 15 ports with 15 removable, self powered ld0: GPT GUID: acff9aa0-5457-4b55-b571-3efa01e2ab31 dk0 at ld0: "f41cb05d-325d-4145-af9e-499eedc50b2f", 3907029072 blocks at 63, type: ffs IPsec: Initialized Security Association Processing. uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ahcisata0 port 0: device present, speed: 1.5Gb/s ahcisata0 port 2: device present, speed: 6.0Gb/s atapibus0 at atabus0: 1 targets cd0 at atapibus0 drive 0: <MATSHITADVD-ROM UJ8E0, SP00A47B08E5, 1.00> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) cd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd0 at atabus2 drive 0 wd0: <KINGSTON SV300S37A60G> wd0: drive supports 1-sector PIO transfers, LBA48 addressing wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors uhidev0 at uhub1 port 12 configuration 1 interface 0 uhidev0: Microsoft (0x45e) Comfort Curve Keyboard 2000 (0xdd), rev 2.00/1.73, addr 1, iclass 3/1 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 12 configuration 1 interface 1 uhidev1: Microsoft (0x45e) Comfort Curve Keyboard 2000 (0xdd), rev 2.00/1.73, addr 1, iclass 3/0 uhidev1: 1 report ids uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0 uhub4 at uhub3 port 1: vendor 8087 (0x8087) product 8002 (0x8002), class 9/0, rev 2.00/0.05, addr 2 uhub4: single transaction translator uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 800a (0x800a), class 9/0, rev 2.00/0.05, addr 2 uhub5: single transaction translator uhub4: 8 ports with 8 removable, self powered uhub5: 6 ports with 6 removable, self powered uhub6 at uhub1 port 14: vendor 0000 (0000) product 0001 (0x01), class 9/0, rev 2.00/0.00, addr 2 uhub6: single transaction translator uhub6: 4 ports with 3 removable, self powered uhidev2 at uhub6 port 1 configuration 1 interface 0 uhidev2: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, addr 3, iclass 3/1 ukbd1 at uhidev2: 8 modifier keys, 6 key codes wskbd2 at ukbd1 mux 1 wskbd2: connecting to wsdisplay0 uhidev3 at uhub6 port 1 configuration 1 interface 1 uhidev3: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, addr 3, iclass 3/1 ums0 at uhidev3: 3 buttons and Z dir wsmouse1 at ums0 mux 0 pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture, mmap pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100 spkr1 at audio0: PC Speaker (synthesized) WARNING: 1 error while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/amd64/7.99.71/modules wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 wskbd1: disconnecting from wsdisplay0 wskbd1: detached ukbd0: detached uhidev0: detached uhidev0: at uhub1 port 12 (addr 1) disconnected uhid0: detached uhidev1: detached uhidev1: at uhub1 port 12 (addr 1) disconnected Derrick Lobo |