Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: recurring tstile hangs on -current
This time it recovered! It took an hour or so, but the tstile blocked
processes are now gone (finished) and I got my console shell (with the
rm) back.
Nothing in dmesg or /var/log/messages.
So it looks like it could be a very extreme slowness instead of a
complete deadlock.
Thomas
On Fri, Jun 28, 2019 at 09:42:08PM +0200, Thomas Klausner wrote:
> To reduce the bug surface, I've disconnected the wd0 device which was
> attached at ahcisata. This also removed the swap device, but the
> machine is far from needing to swap.
>
> After ~5 hours the machine is currently hanging in tstile again. I
> noticed the bulk build wasn't progressing (in a perl module) and
> stopped it, then tried removing the work directory to get pbulk to
> break off, that hung the rm process.
>
> top:
>
> load averages: 0.12, 0.09, 0.08; up 0+09:10:01 21:39:56
> 42 processes: 40 sleeping, 2 on CPU
> CPU states: 0.0% user, 0.0% nice, 0.4% system, 0.0% interrupt, 99.5% idle
> Memory: 8005M Act, 15M Inact, 16M Wired, 23M Exec, 7904M File, 113G Free
> Swap:
>
> PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
> 9833 wiz 85 0 76M 51M ttyraw/3 1:12 11.08% 11.08% systat
> 0 root 0 0 0K 94M CPU/31 305:54 0.00% 0.00% [system]
> 191 root 85 0 32M 2652K kqueue/1 2:13 0.00% 0.00% syslogd
> 24125 wiz 85 0 86M 4984K select/1 0:13 0.00% 0.00% sshd
> 10315 wiz 43 0 24M 2836K CPU/1 0:04 0.00% 0.00% top
> 374 root 85 0 30M 16M pause/1 0:01 0.00% 0.00% ntpd
> 28391 pbulk 117 0 33M 6240K bioloc/0 0:00 0.00% 0.00% perl
> 8152 pbulk 117 0 18M 2300K tstile/1 0:00 0.00% 0.00% make
> 4194 root 117 0 15M 1612K tstile/0 0:00 0.00% 0.00% rm
> 12818 pbulk 117 0 15M 1596K tstile/2 0:00 0.00% 0.00% chmod
> 28169 pbulk 110 0 36M 7376K tstile/1 0:00 0.00% 0.00% perl
> 8873 pbulk 110 0 16M 1608K tstile/2 0:00 0.00% 0.00% chmod
> 2843 root 85 0 86M 6824K select/3 0:00 0.00% 0.00% sshd
> 22714 root 85 0 86M 6816K select/5 0:00 0.00% 0.00% sshd
> 571 root 85 0 70M 5060K wait/0 0:00 0.00% 0.00% login
> 13087 wiz 85 0 86M 5028K select/0 0:00 0.00% 0.00% sshd
> 14025 pbulk 85 0 21M 4812K wait/29 0:00 0.00% 0.00% make
> 17393 pbulk 85 0 20M 4696K wait/14 0:00 0.00% 0.00% make
> 541 postfix 85 0 57M 4568K kqueue/6 0:00 0.00% 0.00% qmgr
> 24142 postfix 85 0 57M 4548K kqueue/5 0:00 0.00% 0.00% pickup
> 404 root 85 0 72M 3424K select/3 0:00 0.00% 0.00% sshd
> 386 root 85 0 57M 3316K kqueue/1 0:00 0.00% 0.00% master
> 8973 root 85 0 20M 2092K wait/0 0:00 0.00% 0.00% sh
> 516 root 85 0 23M 2080K nanosl/6 0:00 0.00% 0.00% cron
> 18983 pbulk 85 0 21M 1996K wait/14 0:00 0.00% 0.00% sh
> 451 root 85 0 16M 1952K pause/0 0:00 0.00% 0.00% ksh
> 19700 wiz 85 0 19M 1948K pause/3 0:00 0.00% 0.00% ksh
> 11499 wiz 85 0 17M 1944K pause/31 0:00 0.00% 0.00% ksh
> 562 root 85 0 23M 1836K ttyraw/2 0:00 0.00% 0.00% getty
> 604 root 85 0 20M 1832K ttyraw/1 0:00 0.00% 0.00% getty
> 467 root 85 0 21M 1828K ttyraw/3 0:00 0.00% 0.00% getty
> 1 root 85 0 20M 1828K wait/4 0:00 0.00% 0.00% init
> 599 root 85 0 26M 1648K kqueue/1 0:00 0.00% 0.00% inetd
> 362 root 85 0 20M 1516K kqueue/3 0:00 0.00% 0.00% powerd
> 11168 pbulk 78 0 37M 6240K bioloc/1 0:00 0.00% 0.00% perl
> 8831 pbulk 78 0 33M 6240K biowai/1 0:00 0.00% 0.00% perl
> 3270 pbulk 78 0 23M 1960K wait/18 0:00 0.00% 0.00% sh
> 8456 pbulk 78 0 20M 1960K wait/3 0:00 0.00% 0.00% sh
> 15353 pbulk 78 0 20M 1960K wait/0 0:00 0.00% 0.00% sh
> 9212 pbulk 78 0 20M 1960K wait/29 0:00 0.00% 0.00% sh
> 8360 pbulk 78 0 20M 1960K wait/1 0:00 0.00% 0.00% sh
> 2790 pbulk 78 0 20M 1960K wait/29 0:00 0.00% 0.00% sh
>
> systat vm:
>
> 3 users Load 0.16 0.10 0.09 Fri Jun 28 21:40:13
>
> Proc:r d s Csw Traps SysCal Intr Soft Fault PAGING SWAPPING
> 8 6 25 145 66 212 in out in out
> ops
> 0.4% Sy 0.0% Us 0.0% Ni 0.0% In 99.6% Id pages
> | | | | | | | | | | |
> forks
> fkppw
> Anon 111464 % zero 64998924 167 Interrupts fksvm
> Exec 23444 % wired 16308 TLB shootdown pwait
> File 8093520 6% inact 15064 100 cpu0 timer relck
> Meta 2016665 % bufs 406873 3 msix2 vec 0 rlkok
> (kB) real swaponly free 3 msix2 vec 1 noram
> Active 8197056 118749328 msix2 vec 2 ndcpy
> Namei Sys-cache Proc-cache ioapic1 pin 12 fltcp
> Calls hits % hits % 61 ioapic2 pin 0 zfod
> 6 6 100 msix7 vec 0 cow
> 8192 fmin
> Disks: ld0 dk0 10922 ftarg
> seeks itarg
> xfers flnan
> bytes pdfre
> %busy pdscn
>
> dmesg as of this boot attached.
> What could I try next?
> Thomas
>
> On Fri, Jun 28, 2019 at 12:05:52PM +0200, Thomas Klausner wrote:
> > When I tried to get a core, I saw:
> >
> > > reboot 0x104
> >
> > dumping to dev 168,2 (offset=73677660, size=33524130)
> > dump ahcisata0 port 5: clearing WDCTL_RST failed for drive 0
> > wddump: device timed out
> > i/o error
> >
> >
> > rebooting...
> >
> > Thomas
> >
> > On Fri, Jun 28, 2019 at 11:39:05AM +0200, Thomas Klausner wrote:
> > > Hi Frank!
> > >
> > > I checked some process states in ddb.
> > >
> > > "master", the 2 "bjam" and at least one "cp" hanging in tstile have:
> > > sleepq_block()
> > > turnstile_block()
> > > rw_vector_enter()
> > > genfs_lock()
> > > VOP_LOCK()
> > > vn_lock()
> > > namei_tryemulroot()
> > > namei()
> > > check_exec()
> > > execve_loadvm()
> > > execve1()
> > > syscall()
> > >
> > > These look quite similar to your backtraces.
> > >
> > > The "cp" hanging in biolock has:
> > > sleepq_block
> > > cv_timedwait
> > > bbusy
> > > getblk
> > > bio_doread
> > > ffs_init_vnode
> > > ffs_newvnode
> > > vcache_new
> > > ufs_makeinode
> > > ufs_create
> > > VOP_CREATE
> > > vn_open
> > > do_open
> > > do_sys_openat
> > > sys_open
> > > syscall
> > >
> > > I can't agree with the statement that it's a general -current problem
> > > -- my current working machine does not have this issue. It "only" has
> > > 32GB and 12 cores though, and no nvme. dmesg attached.
> > >
> > > Do you see the issue on machines without nvme? Just to eliminate that.
> > > (I wanted to try replacing the nvme boot disk next.)
> > > Thomas
> > >
> > >
> > > On Fri, Jun 28, 2019 at 11:20:45AM +0200, Frank Kardel wrote:
> > > > Hi Thomas,
> > > >
> > > > glad that this is observed elsewhere.
> > > >
> > > > Maybe following bugs could resonate with your observations:
> > > >
> > > > kern/54207 [serious/high]:
> > > > -current locks up solidly when pkgsrc building adapta-gtk-theme-3.95.0.11
> > > > looks like locking issue in layerfs* (nullfs). (AMD 1800X, 64GB)
> > > >
> > > > kern/54210 [serious/high]:
> > > > NetBSD-8 processes presumably not exiting
> > > > not tested with -current,but may be there too. (Intel(R) Xeon(R) Gold 6134 CPU @ 3.20GHz, ~380Gb)
> > > >
> > > > At this time I am not too confident, that -current is reliably able to do a pkgsrc build, though I have seen occasionally bulk builds that did finish.
> > > > Most of the time I run into hard lockups with no information about the system state available (no console, no X, no network, no DDB).
> > > >
> > > > Frank
> > > >
> > > >
> > > > On 06/28/19 10:46, Thomas Klausner wrote:
> > > > > Hi!
> > > > >
> > > > > I've set up a new machine for bulk building. I have tried various
> > > > > things, but in the end it always hangs in tstile.
> > > > >
> > > > > First try was what I currently use: tmpfs sandboxes with nullfs
> > > > > mounted /bin, /lib, ... When it hung, the suspicion was that it's
> > > > > nullfs' fault. (The same setup works fine on my current machine.)
> > > > >
> > > > > The second try was tmpfs with copied-in /bin, /lib, ... and
> > > > > NFS-mounted packages/distfiles/pkgsrc (from localhost). That also
> > > > > hung. So the suspicion was that tmpfs or NFS are broken.
> > > > >
> > > > > The last try was building in the root file system, i.e. not even a
> > > > > sandbox (chroot). The only tmpfs is in /dev. distfiles/pkgsrc/packages
> > > > > are on spinning rust, / is on an ld@nvme. With 8 MAKE_JOBS this
> > > > > finished one pkgsrc build (where some packages didn't build because of
> > > > > missing distfiles, or because they randomly break like rust). When I
> > > > > restarted the bulk build with 24 MAKE_JOBS, it hung after ~4 hours.
> > > > >
> > > > > I have the following systat output:
> > > > >
> > > > > 2 users Load 8.78 7.19 3.62 Fri Jun 28 04:27:32
> > > > >
> > > > > Proc:r d s Csw Traps SysCal Intr Soft Fault PAGING SWAPPING
> > > > > 24 10 7548 265849 157956 3504 2399 265476 in out in out
> > > > > ops
> > > > > 56.2% Sy 1.2% Us 0.0% Ni 0.0% In 42.5% Id pages
> > > > > | | | | | | | | | | |
> > > > > ============================> 670 forks
> > > > > fkppw
> > > > > Anon 294104 % zero 62161268 5572 Interrupts fksvm
> > > > > Exec 14116 % wired 16296 1968 TLB shootdown pwait
> > > > > File 24587740 18% inact 43756 100 cpu0 timer relck
> > > > > Meta 2606694 % bufs 495676 msi1 vec 0 rlkok
> > > > > (kB) real swaponly free 9 msix2 vec 0 noram
> > > > > Active 24835908 100033996 9 msix2 vec 1 57262 ndcpy
> > > > > Namei Sys-cache Proc-cache msix2 vec 2 27906 fltcp
> > > > > Calls hits % hits % 3427 ioapic1 pin 12 87178 zfod
> > > > > 125076 122834 98 80 0 59 ioapic2 pin 0 35775 cow
> > > > > msix7 vec 0 8192 fmin
> > > > > Disks: seeks xfers bytes %busy 10922 ftarg
> > > > > ld0 1969 16130K 34.8 itarg
> > > > > dk0 1969 16130K 34.8 flnan
> > > > > wd0 pdfre
> > > > > dk1 pdscn
> > > > > dk2
> > > > >
> > > > > and this from top:
> > > > >
> > > > > load averages: 5.13, 6.53, 3.56; up 1+16:08:05 04:28:13
> > > > > 59 processes: 2 runnable, 55 sleeping, 2 on CPU
> > > > > CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 99.9% idle
> > > > > Memory: 24G Act, 43M Inact, 16M Wired, 14M Exec, 23G File, 95G Free
> > > > > Swap: 163G Total, 163G Free
> > > > >
> > > > > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
> > > > > 10353 pbulk 77 0 185M 172M select/0 0:13 4.74% 4.54% bjam
> > > > > 12120 wiz 109 0 83M 59M tstile/1 165:46 1.46% 1.46% systat
> > > > > 0 root 0 0 0K 93M CPU/31 35:39 0.00% 0.00% [system]
> > > > > 219 root 85 0 32M 2676K kqueue/4 7:34 0.00% 0.00% syslogd
> > > > > 13354 wiz 85 0 89M 4948K select/0 0:52 0.00% 0.00% sshd
> > > > > 380 root 85 0 30M 16M pause/4 0:04 0.00% 0.00% ntpd
> > > > > 10918 wiz 43 0 25M 2872K CPU/3 0:01 0.00% 0.00% top
> > > > > 1 root 85 0 20M 1756K wait/29 0:01 0.00% 0.00% init
> > > > > 5594 pbulk 0 0 0K 0K RUN/0 0:00 0.00% 0.00% bjam
> > > > > 22861 pbulk 0 0 0K 0K RUN/0 0:00 0.00% 0.00% bjam
> > > > > 747 root 117 0 20M 2080K tstile/8 0:00 0.00% 0.00% cron
> > > > > 16473 pbulk 117 0 18M 1564K tstile/2 0:00 0.00% 0.00% cp
> > > > > 9705 pbulk 117 0 15M 1564K bioloc/5 0:00 0.00% 0.00% cp
> > > > > 7301 pbulk 117 0 15M 1560K tstile/2 0:00 0.00% 0.00% cp
> > > > > 22971 pbulk 117 0 19M 1520K tstile/1 0:00 0.00% 0.00% cp
> > > > > 10013 pbulk 117 0 15M 1520K tstile/1 0:00 0.00% 0.00% cp
> > > > > 3411 pbulk 117 0 15M 1520K tstile/3 0:00 0.00% 0.00% cp
> > > > > 5212 pbulk 117 0 15M 1520K tstile/2 0:00 0.00% 0.00% cp
> > > > > 7072 pbulk 117 0 18M 1516K tstile/2 0:00 0.00% 0.00% cp
> > > > > 8880 pbulk 117 0 15M 1516K tstile/2 0:00 0.00% 0.00% cp
> > > > > 5869 pbulk 117 0 15M 1516K tstile/0 0:00 0.00% 0.00% cp
> > > > > 10159 pbulk 117 0 15M 1516K tstile/1 0:00 0.00% 0.00% cp
> > > > > 11783 pbulk 117 0 15M 1516K tstile/7 0:00 0.00% 0.00% cp
> > > > > 7205 pbulk 117 0 15M 1512K tstile/1 0:00 0.00% 0.00% cp
> > > > > 18676 pbulk 109 0 15M 1516K tstile/3 0:00 0.00% 0.00% cp
> > > > > 7802 pbulk 109 0 15M 1516K tstile/2 0:00 0.00% 0.00% cp
> > > > > 622 pbulk 109 0 15M 1512K tstile/2 0:00 0.00% 0.00% cp
> > > > > 29434 pbulk 109 0 9576K 680K tstile/2 0:00 0.00% 0.00% cp
> > > > > 2686 root 85 0 86M 6824K select/2 0:00 0.00% 0.00% sshd
> > > > > 10052 root 85 0 89M 6784K select/2 0:00 0.00% 0.00% sshd
> > > > > 674 root 85 0 70M 5056K wait/18 0:00 0.00% 0.00% login
> > > > > 19345 wiz 85 0 86M 4960K select/3 0:00 0.00% 0.00% sshd
> > > > > 652 postfix 85 0 57M 4848K kqueue/4 0:00 0.00% 0.00% qmgr
> > > > > 4466 postfix 85 0 59M 4560K kqueue/0 0:00 0.00% 0.00% pickup
> > > > > 441 root 85 0 70M 3412K select/2 0:00 0.00% 0.00% sshd
> > > > > 656 root 85 0 57M 3328K kqueue/0 0:00 0.00% 0.00% master
> > > > > 278 root 85 0 45M 2232K nfsd/31 0:00 0.00% 0.00% nfsd
> > > > > 639 root 85 0 16M 2128K pause/0 0:00 0.00% 0.00% ksh
> > > > > 21402 root 85 0 20M 1988K wait/0 0:00 0.00% 0.00% sh
> > > > > 23371 root 85 0 20M 1972K wait/0 0:00 0.00% 0.00% sh
> > > > > 3940 wiz 85 0 16M 1948K pause/23 0:00 0.00% 0.00% ksh
> > > > > 8843 wiz 85 0 16M 1948K pause/5 0:00 0.00% 0.00% ksh
> > > > > 227 root 85 0 20M 1940K select/1 0:00 0.00% 0.00% rpcbind
> > > > > 698 root 85 0 20M 1836K ttyraw/3 0:00 0.00% 0.00% getty
> > > > > 542 root 85 0 20M 1832K ttyraw/2 0:00 0.00% 0.00% getty
> > > > > 535 root 85 0 20M 1832K ttyraw/0 0:00 0.00% 0.00% getty
> > > > > 531 root 85 0 25M 1644K kqueue/3 0:00 0.00% 0.00% inetd
> > > > > 329 root 85 0 24M 1524K select/2 0:00 0.00% 0.00% mountd
> > > > > 436 root 85 0 20M 1516K kqueue/2 0:00 0.00% 0.00% powerd
> > > > >
> > > > > On the console I see that it's currently trying to build
> > > > > boost-headers, so it's not even something compile-heavy.
> > > > >
> > > > > The machine is still in this state and I have a PS/2 keyboard
> > > > > attached, so let me know if you want to check something out.
> > > > >
> > > > > I'll attach the dmesg from 8.99.42 (it's currently at 8.99.48).
> > > > > The kernel config is
> > > > >
> > > > > include "arch/amd64/conf/GENERIC"
> > > > > options FONT_GO_MONO12x23
> > > > > no options FONT_BOLD16x32
> > > > > no options FONT_BOLD8x16
> > > > >
> > > > > It's a 16-core AMD Threadripper system with 128GB RAM.
> > > > >
> > > > > What could go wrong here? I'm running out of ideas.
> > > > > Thomas
> > > >
> > >
> >
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
> 2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 8.99.48 (MIAU) #0: Tue Jun 25 21:38:59 CEST 2019
> root%miau.gatalith.at@localhost:/usr/obj/sys/arch/amd64/compile/MIAU
> total memory = 127 GB
> avail memory = 124 GB
> cpu_rng: RDSEED
> timecounter: Timecounters tick every 10.000 msec
> Kernelized RAIDframe activated
> running cgd selftest aes-xts-256 aes-xts-512 done
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
> mainbus0 (root)
> ACPI: RSDP 0x00000000000F05B0 000024 (v02 AMD )
> ACPI: XSDT 0x0000000078D110A0 0000BC (v01 AMD A M I 03242016 AMI 00010013)
> ACPI: FACP 0x0000000078D1C270 000114 (v06 AMD A M I 03242016 AMI 00010013)
> ACPI: DSDT 0x0000000078D111F0 00B07B (v02 AMD A M I 03242016 INTL 20120913)
> ACPI: FACS 0x0000000079124700 000040
> ACPI: APIC 0x0000000078D1C388 00046A (v03 AMD A M I 03242016 AMI 00010013)
> ACPI: FPDT 0x0000000078D1C7F8 000044 (v01 AMD A M I 03242016 AMI 00010013)
> ACPI: FIDT 0x0000000078D1C840 00009C (v01 AMD A M I 03242016 AMI 00010013)
> ACPI: SSDT 0x0000000078D1C8E0 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
> ACPI: SSDT 0x0000000078D25530 0001CC (v02 AMD CPUSSDT 03242016 AMI 03242016)
> ACPI: SSDT 0x0000000078D25700 002CFA (v01 AMD AMD AOD 00000001 INTL 20120913)
> ACPI: MCFG 0x0000000078D28400 00003C (v01 AMD A M I 03242016 MSFT 00010013)
> ACPI: AAFT 0x0000000078D28440 000440 (v01 AMD OEMAAFT 03242016 MSFT 00000097)
> ACPI: SSDT 0x0000000078D28880 004604 (v01 AMD AMD CPU 00000001 AMD 00000001)
> ACPI: CRAT 0x0000000078D2CE88 001DF8 (v01 AMD AMD CRAT 00000001 AMD 00000001)
> ACPI: CDIT 0x0000000078D2EC80 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
> ACPI: HPET 0x0000000078D2ECB0 000038 (v01 AMD A M I 03242016 AMI 00000005)
> ACPI: SSDT 0x0000000078D2ECE8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
> ACPI: UEFI 0x0000000078D2ED10 000048 (v01 AMD A M I 00000002 01000013)
> ACPI: IVRS 0x0000000078D2ED58 000130 (v02 AMD AMD IVRS 00000001 AMD 00000000)
> ACPI: SSDT 0x0000000078D2EE88 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
> ACPI: SSDT 0x0000000078D308D0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
> ACPI: WSMT 0x0000000078D309C8 000028 (v01 AMD A M I 03242016 AMI 00010013)
> ACPI: 8 ACPI AML tables successfully acquired and loaded
> ioapic0 at mainbus0 apid 128: pa 0xfec00000, version 0x21, 24 pins
> ioapic0: autoconfiguration error: can't remap to apid 128
> ioapic1 at mainbus0 apid 129: pa 0xefc00000, version 0x21, 32 pins
> ioapic1: autoconfiguration error: can't remap to apid 129
> ioapic2 at mainbus0 apid 130: pa 0xb7a00000, version 0x21, 32 pins
> ioapic2: autoconfiguration error: can't remap to apid 130
> cpu0 at mainbus0 apid 0
> cpu0: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu0: package 0, core 0, smt 0
> cpu1 at mainbus0 apid 2
> cpu1: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu1: package 0, core 1, smt 0
> cpu2 at mainbus0 apid 4
> cpu2: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu2: package 0, core 2, smt 0
> cpu3 at mainbus0 apid 6
> cpu3: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu3: package 0, core 3, smt 0
> cpu4 at mainbus0 apid 8
> cpu4: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu4: package 0, core 4, smt 0
> cpu5 at mainbus0 apid 10
> cpu5: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu5: package 0, core 5, smt 0
> cpu6 at mainbus0 apid 12
> cpu6: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu6: package 0, core 6, smt 0
> cpu7 at mainbus0 apid 14
> cpu7: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu7: package 0, core 7, smt 0
> cpu8 at mainbus0 apid 16
> cpu8: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu8: package 0, core 8, smt 0
> cpu9 at mainbus0 apid 18
> cpu9: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu9: package 0, core 9, smt 0
> cpu10 at mainbus0 apid 20
> cpu10: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu10: package 0, core 10, smt 0
> cpu11 at mainbus0 apid 22
> cpu11: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu11: package 0, core 11, smt 0
> cpu12 at mainbus0 apid 24
> cpu12: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu12: package 0, core 12, smt 0
> cpu13 at mainbus0 apid 26
> cpu13: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu13: package 0, core 13, smt 0
> cpu14 at mainbus0 apid 28
> cpu14: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu14: package 0, core 14, smt 0
> cpu15 at mainbus0 apid 30
> cpu15: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu15: package 0, core 15, smt 0
> cpu16 at mainbus0 apid 1
> cpu16: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu16: package 0, core 0, smt 1
> cpu17 at mainbus0 apid 3
> cpu17: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu17: package 0, core 1, smt 1
> cpu18 at mainbus0 apid 5
> cpu18: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu18: package 0, core 2, smt 1
> cpu19 at mainbus0 apid 7
> cpu19: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu19: package 0, core 3, smt 1
> cpu20 at mainbus0 apid 9
> cpu20: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu20: package 0, core 4, smt 1
> cpu21 at mainbus0 apid 11
> cpu21: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu21: package 0, core 5, smt 1
> cpu22 at mainbus0 apid 13
> cpu22: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu22: package 0, core 6, smt 1
> cpu23 at mainbus0 apid 15
> cpu23: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu23: package 0, core 7, smt 1
> cpu24 at mainbus0 apid 17
> cpu24: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu24: package 0, core 8, smt 1
> cpu25 at mainbus0 apid 19
> cpu25: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu25: package 0, core 9, smt 1
> cpu26 at mainbus0 apid 21
> cpu26: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu26: package 0, core 10, smt 1
> cpu27 at mainbus0 apid 23
> cpu27: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu27: package 0, core 11, smt 1
> cpu28 at mainbus0 apid 25
> cpu28: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu28: package 0, core 12, smt 1
> cpu29 at mainbus0 apid 27
> cpu29: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu29: package 0, core 13, smt 1
> cpu30 at mainbus0 apid 29
> cpu30: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu30: package 0, core 14, smt 1
> cpu31 at mainbus0 apid 31
> cpu31: AMD Ryzen Threadripper 2950X 16-Core Processor , id 0x800f82
> cpu31: package 0, core 15, smt 1
> acpi0 at mainbus0: Intel ACPICA 20190405
> acpi0: X/RSDT: OemId < AMD, A M I ,03242016>, AslId <AMI ,00010013>
> acpi0: MCFG: segment 0, bus 0-127, address 0x00000000f0000000
> acpi0: SCI interrupting at int 9
> acpi0: fixed power button present
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> AMDN (PNP0C01) at acpi0 not configured
> APSP (PNP0C02) at acpi0 not configured
> UMEM (PNP0C02) at acpi0 not configured
> attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> spkr0 at pcppi1: PC Speaker
> wsbell at spkr0 not configured
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> SIO1 (PNP0C02) at acpi0 not configured
> S900 (PNP0C02) at acpi0 not configured
> acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
> acpiwmibus at acpiwmi0 not configured
> UMEM (PNP0C02) at acpi0 not configured
> acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> GPIO (AMDI0030) at acpi0 not configured
> I2CA (AMDI0010) at acpi0 not configured
> AWR0 (PNP0C02) at acpi0 not configured
> ABR0 (PNP0C02) at acpi0 not configured
> ABR1 (PNP0C02) at acpi0 not configured
> ABR2 (PNP0C02) at acpi0 not configured
> ABR3 (PNP0C02) at acpi0 not configured
> ABR4 (PNP0C02) at acpi0 not configured
> ABR5 (PNP0C02) at acpi0 not configured
> ABR6 (PNP0C02) at acpi0 not configured
> ABR7 (PNP0C02) at acpi0 not configured
> AWR1 (PNP0C02) at acpi0 not configured
> ABR8 (PNP0C02) at acpi0 not configured
> ABR9 (PNP0C02) at acpi0 not configured
> ABRA (PNP0C02) at acpi0 not configured
> ABRB (PNP0C02) at acpi0 not configured
> ABRC (PNP0C02) at acpi0 not configured
> ABRD (PNP0C02) at acpi0 not configured
> ABRE (PNP0C02) at acpi0 not configured
> ABRF (PNP0C02) at acpi0 not configured
> PTIO (AMDIF030) at acpi0 not configured
> acpiwmi1 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
> acpiwmibus at acpiwmi1 not configured
> attimer1: attached to pcppi1
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network
> amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
> vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
> pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb0 at pci0 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00)
> ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> xhci0 at pci1 dev 0 function 0: vendor 1022 product 43ba (rev. 0x02)
> xhci0: interrupting at msix0 vec 0
> xhci0: xHCI version 1.10
> usb0 at xhci0: USB revision 3.1
> usb1 at xhci0: USB revision 2.0
> ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b6 (rev. 0x02)
> ahcisata0: 64-bit DMA
> ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
> ahcisata0: interrupting at msi1 vec 0
> atabus0 at ahcisata0 channel 0
> atabus1 at ahcisata0 channel 1
> atabus2 at ahcisata0 channel 2
> atabus3 at ahcisata0 channel 3
> atabus4 at ahcisata0 channel 4
> atabus5 at ahcisata0 channel 5
> atabus6 at ahcisata0 channel 6
> atabus7 at ahcisata0 channel 7
> ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b1 (rev. 0x02)
> ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 5.0GT/s
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb3 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> ppb3: link is x1 @ 2.5GT/s
> pci4 at ppb3 bus 4
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> wm0 at pci4 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
> wm0: for TX and RX interrupting at msix2 vec 0 affinity to 1
> wm0: for TX and RX interrupting at msix2 vec 1 affinity to 2
> wm0: for LINK interrupting at msix2 vec 2
> wm0: PCI-Express bus
> wm0: 64 words iNVM, version 0.4
> wm0: Ethernet address 70:85:c2:b5:61:26
> wm0: Copper
> wm0: 0xc614420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,EEE,PLLWA,CLSEMWA>
> makphy0 at wm0 phy 1: I210 10/100/1000 media interface, rev. 0
> makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> ppb4 at pci2 dev 5 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb4: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> pci5 at ppb4 bus 5
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb5 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> pci6 at ppb5 bus 6
> pci6: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 10ec product 8125 (ethernet network, revision 0x01) at pci6 dev 0 function 0 not configured
> ppb6 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
> pci7 at ppb6 bus 7
> pci7: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb7 at pci0 dev 1 function 4: vendor 1022 product 1453 (rev. 0x00)
> ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
> pci8 at ppb7 bus 8
> pci8: i/o space, memory space enabled, rd/line, wr/inv ok
> nvme0 at pci8 dev 0 function 0: vendor 144d product a808 (rev. 0x00)
> nvme0: NVMe 1.3
> nvme0: interrupting at ioapic1 pin 12
> nvme0: Samsung SSD 970 EVO Plus 1TB, firmware 1B2QEXM7, serial S4EWNF0M404219L
> ld0 at nvme0 nsid 1
> ld0: 931 GB, 121601 cyl, 255 head, 63 sec, 512 bytes/sect x 1953525168 sectors
> pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb8 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb8: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> pci9 at ppb8 bus 9
> pci9: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci9 dev 0 function 0 not configured
> vendor 1022 product 1456 (miscellaneous crypto) at pci9 dev 0 function 2 not configured
> xhci1 at pci9 dev 0 function 3: vendor 1022 product 145f (rev. 0x00)
> xhci1: interrupting at msix3 vec 0
> xhci1: xHCI version 1.0
> usb2 at xhci1: USB revision 3.0
> usb3 at xhci1: USB revision 2.0
> pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb9 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb9: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> pci10 at ppb9 bus 10
> pci10: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci10 dev 0 function 0 not configured
> ahcisata1 at pci10 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
> ahcisata1: 64-bit DMA
> ahcisata1: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
> ahcisata1: interrupting at msi4 vec 0
> atabus8 at ahcisata1 channel 0
> hdaudio0 at pci10 dev 0 function 3: HD Audio Controller
> hdaudio0: interrupting at msi5 vec 0
> hdafg0 at hdaudio0: vendor 10ec product 1220
> hdafg0: DAC00 6ch: Speaker [Jack]
> hdafg0: DAC01 2ch: HP Out [Jack]
> hdafg0: DIG02 2ch: SPDIF Out [Jack]
> hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack]
> hdafg0: ADC04 2ch: Mic In [Jack]
> hdafg0: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
> audio0 at hdafg0: playback, capture, full duplex, independent
> audio0: slinear_le:16 6ch 48000Hz, blk 40ms for playback
> audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
> spkr1 at audio0: PC Speaker (synthesized)
> wsbell at spkr1 not configured
> vendor 1022 product 790b (SMBus serial bus, revision 0x59) at pci0 dev 20 function 0 not configured
> pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
> pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
> pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
> pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
> pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
> pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
> pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
> pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
> pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
> pchb14 at pci0 dev 25 function 0: vendor 1022 product 1460 (rev. 0x00)
> pchb15 at pci0 dev 25 function 1: vendor 1022 product 1461 (rev. 0x00)
> pchb16 at pci0 dev 25 function 2: vendor 1022 product 1462 (rev. 0x00)
> pchb17 at pci0 dev 25 function 3: vendor 1022 product 1463 (rev. 0x00)
> pchb18 at pci0 dev 25 function 4: vendor 1022 product 1464 (rev. 0x00)
> pchb19 at pci0 dev 25 function 5: vendor 1022 product 1465 (rev. 0x00)
> pchb20 at pci0 dev 25 function 6: vendor 1022 product 1466 (rev. 0x00)
> pchb21 at pci0 dev 25 function 7: vendor 1022 product 1467 (rev. 0x00)
> isa0 at pcib0
> pckbc0 at isa0 port 0x60-0x64
> pci11 at mainbus0 bus 64
> pci11: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> amdsmn1 at pci11 dev 0 function 0: AMD Family 17h System Management Network
> amdzentemp1 at amdsmn1: AMD CPU Temperature Sensors (Family17h)
> vendor 1022 product 1451 (IOMMU system) at pci11 dev 0 function 2 not configured
> pchb22 at pci11 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb10 at pci11 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00)
> ppb10: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> ppb10: link is x16 @ 2.5GT/s
> pci12 at ppb10 bus 65
> pci12: i/o space, memory space enabled, rd/line, wr/inv ok
> nouveau0 at pci12 dev 0 function 0: vendor 10de product 1401 (rev. 0xa1)
> nouveau0: info: NVIDIA GM206 (126010a1)
> nouveau0: info: bios: version 84.06.14.00.ff
> nouveau0: info: gr: using external firmware
> firmware_open(nouveau/nvidia/gm206/fecs_inst.bin) called too early.
> nouveau0: autoconfiguration error: error: gr: failed to load fecs_inst
> nouveau0: notice: disp: dcb 15 type 8 unknown
> nouveau0: info: fb: 4096 MiB GDDR5
> Zone kernel: Available graphics memory: 46177222 kiB
> Zone dma32: Available graphics memory: 2097152 kiB
> nouveau0: info: DRM: VRAM: 4096 MiB
> nouveau0: info: DRM: GART: 1048576 MiB
> nouveau0: info: DRM: TMDS table version 2.0
> nouveau0: info: DRM: DCB version 4.1
> nouveau0: info: DRM: DCB outp 00: 01000f02 00020030
> nouveau0: info: DRM: DCB outp 01: 02000f00 00000000
> nouveau0: info: DRM: DCB outp 02: 02811f76 04400020
> nouveau0: info: DRM: DCB outp 03: 02011f72 00020020
> nouveau0: info: DRM: DCB outp 04: 04822f86 04400010
> nouveau0: info: DRM: DCB outp 05: 04022f82 00020010
> nouveau0: info: DRM: DCB outp 06: 04833f96 04400020
> nouveau0: info: DRM: DCB outp 07: 04033f92 00020020
> nouveau0: info: DRM: DCB outp 08: 02044f62 00020010
> nouveau0: info: DRM: DCB outp 15: 01df5ff8 00000000
> nouveau0: info: DRM: DCB conn 00: 00001030
> nouveau0: info: DRM: DCB conn 01: 00020146
> nouveau0: info: DRM: DCB conn 02: 01000246
> nouveau0: info: DRM: DCB conn 03: 02000346
> nouveau0: info: DRM: DCB conn 04: 00010461
> nouveau0: info: DRM: DCB conn 05: 00000570
> nouveau0: autoconfiguration error: error: DRM: Pointer to flat panel table invalid
> nouveau0: autoconfiguration error: warn: DRM: unknown connector type 70
> nouveau0: autoconfiguration error: warn: DRM: failed to create encoder 1/8/0: -19
> nouveau0: autoconfiguration error: warn: DRM: Unknown-1 has no encoders, removing
> kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> kern info: [drm] Driver supports precise vblank timestamp query.
> nouveau0: info: DRM: MM: using COPY for buffer copies
> nouveaufb0 at nouveau0
> nouveaufb0: framebuffer at 0xffff9e0908ef4000, size 1920x1080, depth 32, stride 7680
> wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> hdaudio1 at pci12 dev 0 function 1: HD Audio Controller
> hdaudio1: interrupting at msi6 vec 0
> hdafg1 at hdaudio1: vendor 10de product 0072
> hdafg1: DP00 8ch: Digital Out [Jack]
> hdafg1: DP01 8ch: Digital Out [Jack]
> hdafg1: ELD version=0x2,len=32,edid=0x3,port=0x0,vendor=0xd109,product=0x8030
> hdafg1: Monitor = 'BenQ PD2720U'
> hdafg1: SAD id=0,format=1,channels=2,rate=0x07,precision=0x7
> hdafg1: DP02 8ch: Digital Out [Jack]
> hdafg1: DP03 8ch: Digital Out [Jack]
> hdafg1: 8ch/0ch 48000Hz PCM16*
> pchb23 at pci11 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb24 at pci11 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb25 at pci11 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb26 at pci11 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb11 at pci11 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb11: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> pci13 at ppb11 bus 66
> pci13: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci13 dev 0 function 0 not configured
> vendor 1022 product 1456 (miscellaneous crypto) at pci13 dev 0 function 2 not configured
> xhci2 at pci13 dev 0 function 3: vendor 1022 product 145f (rev. 0x00)
> xhci2: interrupting at msix7 vec 0
> xhci2: xHCI version 1.0
> usb4 at xhci2: USB revision 3.0
> usb5 at xhci2: USB revision 2.0
> pchb27 at pci11 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb12 at pci11 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb12: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> pci14 at ppb12 bus 67
> pci14: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci14 dev 0 function 0 not configured
> ahcisata2 at pci14 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
> ahcisata2: 64-bit DMA
> ahcisata2: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
> ahcisata2: interrupting at msi8 vec 0
> atabus9 at ahcisata2 channel 0
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: FFH, lat 1 us, pow 0 mW
> acpicpu0: C2: I/O, lat 400 us, pow 0 mW
> acpicpu0: P0: FFH, lat 1 us, pow 3762 mW, 3500 MHz
> acpicpu0: P1: FFH, lat 1 us, pow 2415 mW, 2800 MHz
> acpicpu0: P2: FFH, lat 1 us, pow 1897 mW, 2200 MHz
> acpicpu1 at cpu1: ACPI CPU
> acpicpu2 at cpu2: ACPI CPU
> acpicpu3 at cpu3: ACPI CPU
> acpicpu4 at cpu4: ACPI CPU
> acpicpu5 at cpu5: ACPI CPU
> acpicpu6 at cpu6: ACPI CPU
> acpicpu7 at cpu7: ACPI CPU
> acpicpu8 at cpu8: ACPI CPU
> acpicpu9 at cpu9: ACPI CPU
> acpicpu10 at cpu10: ACPI CPU
> acpicpu11 at cpu11: ACPI CPU
> acpicpu12 at cpu12: ACPI CPU
> acpicpu13 at cpu13: ACPI CPU
> acpicpu14 at cpu14: ACPI CPU
> acpicpu15 at cpu15: ACPI CPU
> acpicpu16 at cpu16: ACPI CPU
> acpicpu17 at cpu17: ACPI CPU
> acpicpu18 at cpu18: ACPI CPU
> acpicpu19 at cpu19: ACPI CPU
> acpicpu20 at cpu20: ACPI CPU
> acpicpu21 at cpu21: ACPI CPU
> acpicpu22 at cpu22: ACPI CPU
> acpicpu23 at cpu23: ACPI CPU
> acpicpu24 at cpu24: ACPI CPU
> acpicpu25 at cpu25: ACPI CPU
> acpicpu26 at cpu26: ACPI CPU
> acpicpu27 at cpu27: ACPI CPU
> acpicpu28 at cpu28: ACPI CPU
> acpicpu29 at cpu29: ACPI CPU
> acpicpu30 at cpu30: ACPI CPU
> acpicpu31 at cpu31: ACPI CPU
> nouveau0: autoconfiguration error: error: disp: chid 1 mthd 0080 data 00000000 00005080 0000000d
> nouveau0: info: disp: Base 1:
> nouveau0: info: disp: 0080: 00000000
> nouveau0: info: disp: 0084: 00000000 -> 00000010
> nouveau0: info: disp: 0088: 00000000 -> 00000100
> nouveau0: info: disp: 008c: 00000000
> nouveau0: info: disp: 0090: 00000000 -> 00000001
> nouveau0: info: disp: 0094: 00000000 -> f0000000
> nouveau0: info: disp: 00a0: 00000000
> nouveau0: info: disp: 00a4: 00000000
> nouveau0: info: disp: 00c0: 00000000 -> ffff0000
> nouveau0: info: disp: 00c4: 00000000
> nouveau0: info: disp: 00c8: 00000000
> nouveau0: info: disp: 00cc: 00000000
> nouveau0: info: disp: 00e0: 00000000 -> 40000000
> nouveau0: info: disp: 00e4: 00000000
> nouveau0: info: disp: 00e8: 00000000
> nouveau0: info: disp: 00ec: 00000000
> nouveau0: info: disp: 00fc: 00000000
> nouveau0: info: disp: 0100: fffe0000
> nouveau0: info: disp: 0104: 00000000
> nouveau0: info: disp: 0108: 18131813
> nouveau0: info: disp: 010c: f0000000
> nouveau0: info: disp: 0110: 00000000
> nouveau0: info: disp: 0114: 00000000
> nouveau0: info: disp: 0118: 00000000
> nouveau0: info: disp: 011c: 00000000
> nouveau0: info: disp: 0130: 00000000
> nouveau0: info: disp: 0134: 00000000
> nouveau0: info: disp: 0138: 00000000
> nouveau0: info: disp: 013c: 00000000
> nouveau0: info: disp: 0140: 00010000
> nouveau0: info: disp: 0144: 00000000
> nouveau0: info: disp: 0148: 00000000
> nouveau0: info: disp: 014c: 00000000
> nouveau0: info: disp: 0150: 00000000
> nouveau0: info: disp: 0154: 00010000
> nouveau0: info: disp: 0158: 00000000
> nouveau0: info: disp: 015c: 00000000
> nouveau0: info: disp: 0160: 00000000
> nouveau0: info: disp: 0164: 00000000
> nouveau0: info: disp: 0168: 00010000
> nouveau0: info: disp: 016c: 00000000
> nouveau0: info: disp: Base 1 - Image 0:
> nouveau0: info: disp: 0400: 00000000 -> 00000600
> nouveau0: info: disp: 0404: 00000000
> nouveau0: info: disp: 0408: 00000000 -> 04380780
> nouveau0: info: disp: 040c: 00000000 -> 01001e00
> nouveau0: info: disp: 0410: 0000e900 -> 0000cf00
> nouveau0: info: disp: Base 1 - Image 1:
> nouveau0: info: disp: 0420: 00000000
> nouveau0: info: disp: 0424: 00000000
> nouveau0: info: disp: 0428: 00000000
> nouveau0: info: disp: 042c: 00000000
> nouveau0: info: disp: 0430: 0000e900
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> autoconfiguration error: ERROR: 1119 cycle TSC drift observed
> uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub0: 6 ports with 6 removable, self powered
> uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub1: 14 ports with 14 removable, self powered
> uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub2: 4 ports with 4 removable, self powered
> uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub3: 4 ports with 4 removable, self powered
> uhub4 at usb4: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub4: 4 ports with 4 removable, self powered
> uhub5 at usb5: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub5: 4 ports with 4 removable, self powered
> ld0: GPT GUID: f4f5a57c-745a-4fcc-a8bf-4b38a2f694e1
> dk0 at ld0: "nvmeboot", 1953525101 blocks at 34, type: ffs
> uhidev0 at uhub5 port 3 configuration 1 interface 0
> uhidev0: vendor 046a (0x46a) product 0023 (0x23), rev 2.00/2.20, addr 1, iclass 3/1
> ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub5 port 3 configuration 1 interface 1
> uhidev1: vendor 046a (0x46a) product 0023 (0x23), rev 2.00/2.20, addr 1, iclass 3/0
> uhidev1: 2 report ids
> uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhidev2 at uhub5 port 4 configuration 1 interface 0
> uhidev2: Microsoft (0x45e) Microsoft Basic Optical Mouse v2.0 (0xcb), rev 1.10/1.99, addr 2, iclass 3/1
> ums0 at uhidev2: 3 buttons and Z dir
> wsmouse0 at ums0 mux 0
> IPsec: Initialized Security Association Processing.
> WARNING: 10 errors while detecting hardware; check system log.
> boot device: ld0
> root on dk0
> root file system type: ffs
> kern.module.path=/stand/amd64/8.99.48/modules
> wsdisplay0: screen 1 added (default, vt100 emulation)
> wsdisplay0: screen 2 added (default, vt100 emulation)
> wsdisplay0: screen 3 added (default, vt100 emulation)
> wsdisplay0: screen 4 added (default, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index